k und g used for sale

Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 90 kg,

Key data: 3 kW, 2820 U/min, 7 A

Manufacturer: Perske, Type: KNS 62.18-2 BR, Volt: Y 400, Hz 1: 50, 3.5 kW rpm: 2860, Availability: immediate,

Pallet feeder PFH-82 4 buckles BCUH-78 2 knives Batch counter Anti-noise hood SBP-66-VE delivery (year 2010) 6 folding rollers changed in 2025.

Pallet feeder 4 buckles BCUH-78 2 knives Side buckle Batch counter Anti-noise hood SBP-66+MKE+VE delivery (year 2007) Belt delivery Folding rollers changed in 2021, belts in 2024.

cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Compressor, Fabr. Kaeser, Type SXC 8, YOC 2010 Operating pressure 11.0 bar Power 5.5 kW

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand

Type: TG3000/600 Serial number: 278 Belt width: 600 mm Transport length: 3150 mm Power: 3 x 380V, 50Hz, 0.09kW Dimensions: 3200 x 800 x 1050 mm Weight: 110 kg

Type: TD600 Belt width: 600 mm Power: 3 x 380V, 50Hz, 0.5kW Dimensions: 2500 x 800 x 1450 mm Weight: 200 kg

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Manufacturer: KASTO Model: Twin A 4 AU CNC Year of Manufacture: 2004 Cutting Capacity: 400 mm x 400 mm (Ø 400 mm) Technical Specifications - Cutting Range Round: 400 mm - Cutting Range Square: 400 x 400 mm - Material Feed per Stroke (automatic): 600 mm - Multiple Feed Length: 99,999 mm - Cutting Speed: Stepless, 20–130 m/min - Total Drive Power: 7 kW - Saw Motor Power: 4 kW - Speed Reduction: Stepless adjustable - Material Height: 100 mm - Saw Blade Dimensions: 5700 x 41 x 1.3 mm - Shortest Cutting Length (automatic): 6 mm - Shortest Remnant Length (automatic): 80 mm - Voltage: 380V / 50Hz - Machine Dimensions (LxWxH): 2415 x 2400 x 1720 mm - Weight: 2200 kg Special Accessories - Coolant system - CNC control - Idle run monitoring - Machine roller table - Band tension control - Height measurement system - Light barrier - End stop Optional Roller Conveyors: - Roller Conveyor 30 ...

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm drive motor: 2 x 0,55 kW total power requirement: 1,1 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.

Key data: 1400 mm, 440 mm, 450 mm

Year of manufacture: 1978/ GÜ: 2007 Table dimensions ... 2000x425mm Axis X ... 1400mm Axis Y ... 440mm Axis Z ... 450mm Main engine power ... 11kW Machine weight ... 5170kg L x W x H ... 3920x2520mm The machine is in good condition, possible to test under power.

Kuka KR 30/2 6-axis industrial robot Manufacturer: KUKA Model No.: KR30-2 Nominal total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Control: KUKA KR C1 (01-051-810) Kuka Teachpendant KR C1 Weight : 867 kg Year of Make: 1997 Operating hours: approx. 20000 Robot Applications Loading and unloading parts Processing Handling-of-parts Polish Arc welding Palletizing Robot Movement Speed: Axis 1: 140º/s Axis 2: 126º/s Axis 3: 140º/s 4 axis: 260º/s Axis 5: 245º/s Axis 6: 322º/s More items - new and used - can be found in our shop! International shipping costs on request!

- Double guideway two box way construction - Head changer for Multi-Face machining off larger compontents - ATC tool changer for Horizontal and vertical milling head swivabel - Distance table spindle nose    213 - 1093 mm - Distance table spindle center  130 -  ...mm - Indexing Horizontal head 5 Degrees x 72 positions - HeidenHain iTNC530 with HR410 handwheel - Spindle torq 1018 Nm ISO50  - Universal Huron type milling head

Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

The MultiCutter consists of a fixed knife and a rotating set of blades driven by a direct-coupled motor. The blades are made from specially hardened steel for greater resistance to wear and extended service life. We have 8 pieces to offer.

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-travel: 2250 mm control: Sinumerik 840 D table surface area: 5500/12150 x 3000 mm distance between columns: 3500 mm max. distance between table and spindle-nose: 3000 mm max. workpiece weight: 70000 / 105000 kg ram head dimension: 480 x 510 mm spindle turning speed - stepless: 6,3 - 4000 U/min milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 feed speeds: X/Y/Z= 24000 mm/min total power requirement: 120 kVA weight of the machine ca.: 245 t dimensions of the machine ca.: 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight  ...

8x lafonte plate filter BIG 36D3 KPP951 TX

Air compressors from Kostal Industrie Elektrik

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1887 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW:  ...

Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.

thickness of jaw: 160 / (200) mm clamping capacity: bis 60 kN Packing: 620 205 120 (185) mm Shipping weight: 110 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet nailing machine Böhm & Kruse Year of Make: 1980 Pallet mounting size max. 1200 mm x 1650 mm 20 nail guides good, ready-to-use condition

Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany

Image sensor 1", 6.6 megapixels, CMOS Dual telecentric lens Z-axis travel 30 mm Z-stage stage maximum load 3 kg

Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg

Manufacturer: Kornit Model: Breeze Print count: 128,500 - The printer is sold without print heads - It has an integrated pre-treatment unit. - The set includes tables for body and sleeve prints, as well as for children´s t-shirts. I have a Kornit Breeze printer for sale, from a Polish distributor. The print count is 128.5 thousand. The printer is sold without print heads. It has an integrated pre-treatment unit. The set includes tables for body and sleeve prints, as well as for children´s t-shirts. The printer has not been used for a year. I can issue an invoice if needed. There is also an option to purchase individual parts – we can sell 3 different mainboards, tables, manifold, side doors, or the wiper mechanism. The machine was installed here in November 2018. The manuals show the date 2017, the year is most likely one or the other. Find more here - / Contact us at -

Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25328 Specifications: - Max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48 ° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - Front angle stop approx. 1100 mm - 2 pcs. front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

Kleencare vapour abrasive blasting machine Manufacturer: Kleencare Year of Make: 1992 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 100 litres Use: Cleaning and surface treatment by wet blasting Features: Pressure blasting process with water-air mixture for gentle removal of dirt, paint and oxidation layers

Reference Num.: 4228 Brand: Konica Minolta Type: bizhub PRESS C1100 Construction year: 2018 Impressions: 1 mio Available: directly Status: In production Location: Deutschland Equipment: - Finisher FS 532 - RE-511 Kühl-/Glättungseinheit - Großraummagazin PF-708 - IC-308 EFI Fiery external Controller

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton

Type: PRM600MEG Serial number: 2000 Belt width: 600 mm Power: 3 x 380V, 50Hz, Dimensions: 3300 x 1000 x 1700 mm Weight: 750 kg

x-travel: 10000 mm y-travel: 3000 mm z-travel: 1500 mm Control: Heidenhain TNC 430CA milling head -swivable: 360.000 pos spindle turning speed range: 10 - 3000 U/min Tools changer: 40 pos. feed: 5000 mm/min Rapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/min spindle motor: 37 kW total power requirement: 80 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: m Traveling column milling and boring machine - Control Heidenhain TNC 430CA & HR 410 - autom. Tool changer with 40 places (SK 50) - Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor - OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independent FAGOR CNC Control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper cutting machine with 39cm cutting width. cleaned and checked

For MUSSANA Whipped Cream Pump for Older Models NEW Unused

3D Measurement Macroscope Controller VR 3000K Measuring head VR 3100 Measuring range 24 x 18 x 10 mm Measuring diagonal 30 mm Magnification: 12x – 160x Resolution 0.1 μm Automatic edge detection

Ice water system

Inv. Num. : 8726 Type: VL 1750 Producer: Koplast Created: 2009 Parameters: Total power: 39.6 kW Length: 3200 mm Width: 2300 mm Height: 2950 mm Weight: 1500 kg Equipment: Technical documentation The machine is equipped with: Digitally controlled top and bottom heating BECKER vacuum system Infinitely adjustable table stroke Manual and automatic control Suitable for plastic molds (PVC/PMMA/PET/PC/ABS...)

Technical data: Material width: min. 100 mm, max. 340 mm Printing width: max. 325 mm Print repeat length: min. 101.6 mm, max. 355.6 mm Machine components: • Corona treatment • Turn bar • 3× screen printing units • Hot foil stamping unit • 1× screen printing unit • Flatbed die cutter • 1× screen printing unit