k und g used for sale

OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50 Doka Screw jack U-head Screw jack U-head for height-adjustable connection between load-bearing tower and superstructure. 9.20 kg EUR 37,50

- size 560 x 405 mm - automatic feed of covering material - automatic feed of spine and side panels - hot melt adhesive - stacking device - presing of delivery

Technical data: Complete retrofit year 2003 CNC Fagor 8055T Working diameter 5,000mm Table diameter 4,500mm Table speed 35rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,500m main motor power 182 Kw nr.02 chip evaders permissible weight on the table 63 ton Machine in excellent condition available unless sold.

Technical data: Complete retrofit year 2008 CNC Fagor 8055T Working diameter 4,200mm Table diameter 4,000mm Table speed 55rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,000m main motor power 182 Kw nr.01 chip evaders permissible weight on the table 50 ton Machine in excellent condition available unless sold.

Technical data: Complete retrofit year 2002 CNC Fagor 8065T Working diameter 3,400mm Table diameter 3.200mm Table speed 59 rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 1,640m main motor power 75 Kw nr.01 chip evaders Weight allowed on the board 16 ton Machine in excellent condition available unless sold.

Working width: 2000 mm Roller width: 2200 mm pressure: 50 t Pressure line: 230 N / mm Number of rollers: 3 Stück Upper roll: 280 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm dia Roller covering: Polyamidmantel Lower roll: Stahl dia diameter of lower rolls: 280 mm Roller covering: Schreiner-Gravur Clouth speed: max.100 m/min Weight: 26 to dimensions of the machine ca.: 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder, The data for this ad was created with ModulMWS - the sof ...

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging / Weighing / Labeling KUCHLER S.A.M. P3 Specifications: Slicer type: SAM P3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Scale/Labeler: Mettler Toledo PAZ UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2015 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 45,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging KUCHLER S.A.M. PX3 Specifications: Slicer type: SAM PX3 /26 (wide version with large chain frame, offshoot and conveyor belt) Type Foil Machine: SAM Foil Maker 21/26 Type Packer: SAM Welding Station 21/26 400 Volt / 50 Hz / 3.55 A Year of Make: 2019 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original knife sharpener including original knife lifter including adjustment boards for each individual machine including 1 package of foil New price in this version approx. EUR 55,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have ...

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Bottle washer Klinger type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Steam-heated incl. PCL Siemens S7 suitable for bottles of 200 ml - 1,000 ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm Currently set up for: - 330 ml longneck - 500 ml longneck - 330 ml swing-top bottle - 500 ml swing-top bottle Dimensions: Length: 10,000 mm Width: 395 mm Height: 285 mm Weight: approx. 20 t

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Pallet feeder 4 buckles Batch counter Anti-noise hood MBO Z2 knife Palamides Alpha 500 delivery (year 2005)

KAUTEX KCC30 Extrusion Blow Molding Machine / Extruder Year: 2012 Number of operating hours: 33000 hours 1 position Robot Kautex Clamping force: 300 KN Screw diameter: 90 mm 4 KG Accumulation Head (HDPE) Tray dimensions: 530 x 700 mm Distance between trays: 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Command: Blow command Head Type: Vertical Head with Hydraulic Accumulator Maximum container volume: 30 litres Die diameter: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 M3/h Air pressure: 6 - 10 bar Installed power: 20 KW Number of temperature zones: 5

Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets

Kitagawa Collet Chuck DHP65 A6

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

KNOLL VRF 900/6000 Coolant system GENERAL Project No.: 905738 Quantity: 1 pcs. Manufacturer: KNOLL Type: VRF 900/6000 Year of Make: 2006 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION GENERAL TECHNICAL DATA Mains fuse 200 A Total power requirement 88 kVA Machine dimensions (LxWxH) approx. 3667x2338x4000 mm REMARK The system supplied three multi-spindle milling machines in one processing line. We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

Original Heidelberg letterpress Suitable for die-cutting and printing – Model: KSBA – Z – No.: 335518 – 2 x Colors - Format: 46 x 58.5 cm (18" x 23") – Year of construction: 1968 – Round + Flat – Weight approx.: 3500.00 kg – Max speed: approx. 5000 prints per hour – Machine length: 2530 mm / Machine width: 1450 mm

Paint booth with extraction device and cabinet Item: Paint booth with suction device and cabinet Dimensions paint booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colors: green and black Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.

Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general indus ...

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

Second Hand Kaeser CSD105SFC. 55 kW with 12 bar and 8.79 m3/min. Built in 2018 with around 24,000 hours. Frequency-controlled. Compactor stage new in 2021. With WRG.

KUKA Robot KR30L15/2 Year of manufacture 2002 Weight 930kg Only 75`000 operating hours PC control type K C2 including panel Drive controller KSD Control cabinet KR CC USB stick with documentation and schematics Unloading and machine data in the appendix Annually serviced by Kuka Roboter Schweiz AG with service contract maintained Robot is fully functional and in very good condition Including various spare and new parts Is ready for pickup, loaded on pallets Included: Axis control module KSD1-48, new price 1900,-CHF Power supply KPS600/20, new price 4500,- CHF Three-phase servo motor CO/KKSSY, new price 2200,- CHF Control PC KC2, new price 5400,- CHF CI board / mains filter / cable sets, approx. selling price 800,- CHF Axis control module KSD1-32, new price 1400,- CHF Axis control module KSD1-08, new price 1200,- CHF Support batteries / HDD hard disk / motor protecti ...

Injection molding machine Krauss Maffei KM 800-4300 MX BJ 2006

Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.

Injection molding machine Krauss Maffei KM 650-4300 CX BJ 2010

measuring range X-axis: 330 mm measuring range Z-axis: 400 mm dimensions: 880 x 520 x 990 m Tool spindle: SK 50 Indexable (4× 90°), pneumatic Measuring system: Heidenhain LS series, optoelectronic Profile projector/optics: 0× magnification, cutting edge control using crosshairs Weight: approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t

A cold glue rotary labelling machine Krones is available. Product: wine, bottle formats: 0.75l/1l, labelling capacity: 10000 bottles/h. Includes all format parts and spare parts. Documentation available. An on-site inspection is possible. Expected to be available from February 2026.

Format max. 790 x 1090 mm, manual flaps on both sides, refined table surface

CONTROLS   PLC SIEMENS S5 115U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 140 mm   sheet thickness max.: 6 mm   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 300 mm   coil weight max.: 3 to   max. diameter of coil: 1300 mm   mandrel expansion range from: 360 mm   mandrel expansion range up to: 430 mm LEVELLER UNIT   sheet width max.: 140 mm   sheet thickness max.: 6 mm   sheet thickness min.: 3 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   feed velocity max.: 43 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 35 kW KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Machine Name: Used Sludge Dewatering Centrifuge Manufacturer: KHD / Hiller Type: CP3034/DP350422 VA HY Year of manufacture: 1997 / 2012 Material: V4A 14571 Max. drum speed: 4,200 rpm Inner diameter drum: 348 mm Drum wall thickness: 10 mm Inner drum length: 1,700 mm Ab. Sediment density: 1.30 kg/dm3 Max. operating temperature: 50 C° Dimensions: L 2,700 x W 1,400 x H 1,100 mm Curb weight: 2,880 kg Tech. Documentation: Yes Note: The rotor was replaced by Hiller in 2012 in a V4A stainless steel version, type: DP 350-422 VA HY Accessories: A control cabinet and a hydraulic system Condition: Used Price: On request

Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...

Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...

cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...

Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...

Key data: 18 , 8 , 3

Gyártó: Kaeser ASD 32T csavarkompresszor + hűtőszárító folyamatosan karbantartott! teljes dokumentáció Építési év: 2008 Névleges nyomás: 8 bar Levegőáram: 3,16 m3/min Levegőáram: 189,6 /óra Üzemóra: 87000 Hűtőszárító: ABT60 Sűrített levegő csatlakozása: G 1¼ Feszültség: 400 V/3 PH, 36 A Teljesítmény: 18,5 kW Motor fordulatszáma: 2945/min Környezeti hőmérséklet: 3 / 45°C A gép súlya: 745 A gép méretei: 1770 x 900 x 1530 mm

Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.