k und f used for sale

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

electric motor, three-phase motor -Power: 1.1 kW -Speed: 700 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/213/H230 mm -Weight: 29 kg

Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT 380.RM -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Jungheinrich, tiller head / tiller complete from pedestrian stacker type EJE-KmS -Number: 2x drawbar available -Price per piece -Dimensions: 1050/510/H220 mm -Weight: 20 kg/pc.

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Fan filter, fan line, air cooler, control cabinet fan, fan -Manufacturer: Sheng Kwei, fan fan -Engine: Type SK205AP-11-1 -Dimensions: 205/80/H205 mm -Weight: 2,6 kg

Operating lever, cross lever, cross switch, cross toggle switch lever -Control lever: Cross toggle switch -Type: KSK 22/6 021652 -Voltage: up to 250V 10A -Dimension: Ø 81 x 137 mm -Weight: 0.3 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: TER Tecno Elettrica Ravasi, Crane remote control with cable / Portable control panel for crane -Cable length: 25 m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

Gauge block, gauge blocks, gauge block holders -Manufacturer: Koba, End gauge holder with quick adjustment -Type: 100-200 -Dimensions: 105/70/H325 mm -Weight: 1.3 kg

Drive shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item No.: 00 103 782 -Shaft: Ø 42 mm -Number: 6x articulated arms available -Price: per piece -Dimensions: Ø 42 x 660 mm -Weight: 1.6 kg/pc.

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

PTO shaft, cardan shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item no.: 71 040 098 -Shaft: Ø 37 mm -Number: 3x articulated arm available -Price per piece -Dimensions.: Ø 37 x 650 mm -Weight: 1.3 kg/pc.

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

Industrial robots, robots, counterbalancing -Manufacturer: KUKA, counterweight from robot KR125/3 -Type: GA2-D2 -Location hole: Ø 54 mm, distance 620 mm -Technical data: see photos -Dimension: 760/220/H290 mm -Weight: 41 kg

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 62 mm -Intake: MK4 -Dimensions: 740/76/107 mm -Weight: 5.4 kg

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 70mm -Intake: MK5 -Dimensions: 825/65/70 mm -Weight: 18 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Stöber, gearbox type K813AG0420SD132S4 -Translation: i = 42.495 -Hollow shaft: Ø 70 x 260 mm -Drive wheel: helical -Bolt circle: Ø 215 mm M12 -M2 perm: 1482 Nm / n1= 1440 rpm n2= 33.9 rpm -Dimensions: 420/290/H410 mm -Weight: 125 kg

We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist 1.5 ton -Load capacity: 1 1/2 ton -Chain Length: 3m -Quantity: 1 piece -Price per piece -Transport dimensions: 660/300/H150 mm -Weight: 19 kg/pc.

Proximity switch, proximity sensor, proximity sensor -Manufacturer: Keyence, proximity switch proximity sensor unused original packaging -Type: EM-030P -Number: 2x encoder available -Price per piece -Dimensions packaging: 110/105/H25 mm -Weight: 0.1 kg/pcs

Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct

length in total: ca. 3500 mm band width: ca. 700 mm conveying height: ca. 1200 ejection height approx.: 1200 mm dimensions of the machine ca.: ca. 3500 x 1300 x 1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

Hydraulic surface grinding machine Kair TM800x400. Max. table travel: 800mm. Max. cross travel: 400mm. Height over grindstone: 260mm. Main motor power: 3hp. Speed: 2000rpm. Grindstone: 250x40x76mm. Max. dimensions magnetic chuck: 600x300mm. Weight: 1800kgs. Dimensions: 2500x1500x1900mm.

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 5550 ( 4750 + 800 ) Nominal / outside width in mm: 885 Belt width in mm:  ...

Auxiliary switch, circuit breaker, circuit breaker, switch disconnector, switch disconnector, circuit breaker, circuit breaker, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, main switch disconnector -Type: B T103/01 -Dimensions: 65/65/H105 mm -Weight: 0.2 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Rexroth, 3-phase permanent magnet motor -Type: MKD041B-144-KPO-KN -Speed: 7500 rpm -Shaft: Ø 14 x 30 mm -Dimensions: 275/83/H112 mm -Weight: 4.6 kg

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

1 of pre-owned labeling station for self-adhesive (pressure sensitive) labels, make Krones/Kosme, type M90. 2 units available.

Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 182 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

2500 KVA Transformer Year 2009

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg

Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

Equipment: Precision Six-Jaw Chuck 1. Cylindrical grinding device Partial Setup Coolant system Instruction manual

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

Holset / KBB MR5-3 turbocharger suitable for MaK 8M25 Engine in good condition with reports available

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece