129,524 used machines on RESALE, but how to find them? Machine Search
Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: ...
Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102
Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2820 rpm at 50 Hz -Voltage: 400 volts -Shaft mounting: Ø 30 mm -Dimensions: 430/230/H145 mm -Weight: 33 kg
Electric motor, three-phase motor with 2 speeds -Power: 0.48/1.6 kW -Speed: 720/2880 rpm -Shaft: Ø 16 mm -Construction: B5 -Protection class: IP 44 -pole changing -Dimensions: 440/200/H260 mm -Weight: 36 kg
Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 675 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...
Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s: bis 1,25m/s scope of delivery: inklusive Pneumatische Ventile und Zylinder, including supports For i ...
End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg
Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm
Three-phase motor, electric motor -Engine: unused -Power: 30kW -Speed: 2940 rpm -Protection class: IP 23 - Type: B35 -Shaft: Ø 55 mm - Bolt circle: 350 mm -Number: 2x available -Price per piece -Dimensions: 720/500/H400 mm -Weight: 210kg
Three-phase motor, electric motor -Engine: is unused -Power: 45 kW -Speed: 2945 rpm -Shaft: Ø 60 mm -Height of shaft axis: 200 mm -Design: B35 -Protection class: IP 23 -Dimensions: 780/550/H460 mm -Weight: 250 kg
Three-phase motor, electric motor -Power: 4.4 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 410/390/H300 mm -Weight: 68 kg
Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides Features: nominal voltage: 24V, 380-500V condition: very good (used) Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s ...
Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 30 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 450/148/H290 mm -Weight: 51 kg
Three-phase motor, electric motor -Motor: is unused -Power: 160 kW -Speed: 2960 rpm -Shaft: Ø 65 mm -Protection class: IP 54 -Construction: B35 -Dimensions: 1190/920/H730 mm -Weight: 730 kg
Electric motor, three-phase motor -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 260/150/H205 mm -Weight: 9 kg
Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Quantity: 1x electric motor available -Price: per piece -Dimensions: 450/250/H310 mm -Weight: 57 kg
Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 475/285/H330 mm -Weight: 69 kg
Electric motor, three-phase motor -Power: 4.0 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Number: 1x available -Price: per piece -Dimensions: 390/300/H230 mm -Weight: 43 kg
Fan, fan, electric motor, blower -Speed: 1360 rpm -Power: 0.37 kW -Air volume: 9700 m³/h -Fan diameter: 500 mm -Number: 4x fans available (1x with damage to the plastic) -Price: per piece -Dimensions: 792/830/H490 mm -Weight: 16 kg/piece
Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1245 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/255/H295 mm -Weight: 51 kg
Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -1x design: B3/B5 -1x design: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 480/285/H335 mm -Weight: 69 kg
electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 54 -Dimensions: 250/200/H195 mm -Weight: 10.6 kg
Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg
Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
Water softener, water softener tank -Bank: approx. 200 liters -Incl. Regeneration salt for water softeners -Dimensions: 640/640/H880 mm -Weight: 172 kg
Three-phase motor, electric motor -Power: 0.75 kW -Speed: 1420 rpm -Shaft: Ø 22/18 mm -Construction: B5 -Protection class: - -Dimensions: 340/160/H200 mm -Weight: 15.4 kg
Centrifugal pump, water pump -Pump: is sold as dismanteld -Delivery rate: 18-50 m³/h -max H: 12.7-8.5 mWs -Motor power: 2 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN50 -Dimensions: 460/280/H240 mm -Weight: 37 kg
Centrifugal pump, water pump -Delivery rate: 20-50 m³/h -Max. H: 14-9 mws -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN40 -Dimensions: 530/270/H300 mm -Weight: 45 kg
Knobel line and a W&D line shot depositor for chocolate. Dosing machine for tempered chocolate with agitator or other liquid as well as slightly viscous products also AWEMA moulding line Hacos chocolate moulding line
Gear motor, electric motor -Speed: 46 rpm -Power: 1.5 kW -Construction: B3 angle -Shaft diameter: Ø 30 mm -Protection class: IP 54 -with: external fan -Dimensions: 590/250/H200 mm -Weight: 40 kg
Key data: 530 mm
KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...
2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.
centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg
ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 375 mm -Width: 20 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg
Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg
new
100 detachable towbars Kia Sportage, new, from model year 2015, without E-set for orders of 10 pieces: Price per piece 50,00 € plus VAT VAT
new
70 pieces of detachable towbars without E-set Kia Ceed from model year 2015 for orders of 10 pieces: Price per piece € 50.00 plus VAT
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 189 mm -Width: 16 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg
electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 440/265/H360 mm -Weight: 61 kg
Three-phase motor, electric motor -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP54 -Dimensions: 390/300/H245 mm -Weight: 43 kg
Three-phase motor, electric motor -Power: 4 kW -Speed: 725 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 550/410/H305 mm -Weight: 97 kg
Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg
Three-phase motor with 2 speeds, electric motor -Power: 4/16 kW -Speed: 740/1470 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 650/450/H365 mm -Weight: 167 kg
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 710 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 490/340/H260 mm -Weight: 63 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51mm -Outer: Ø 250 mm -Width: 39 mm -Price: per piece -Number: 2x available -Weight: 4.2 kg
maximum number of results exceeded
please refine your search
