k und f used for sale

Sound-insulated generator with Perkins diesel engine Power: 60 kVA Year: 2020 Operating hours: None Generator: Stamford / AvK S1L2Y1 Voltage: 400/231 V, 50 Hz Cooling: Water Tank: 175 litres Control panel: Manual and automatic operation with ComAp AMF9 generator circuit breaker, socket distribution Subject to prior sale - errors possible Internal reference number: E-1004-55

Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package

Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Palletizing system for trays or similar products.

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -with: balancer and compressed air hose -adjustable depths: 5 -for staples: 32 mm wide -Dimensions: 390/100 / H210 mm -Total weight: 3.4 kg

Transformer, single-phase power transformer -Primary: 400 V -Secondary: 115/230 V, 21.6/10.8 A -Voltage: 2500 VA -Price: per piece -Number: 2 pieces -Dimensions: 320/300/H465 mm -Weight: 35 kg/piece

Stick electrodes 4.0 x 350 -Type: KESTRA YELLOW -Weight: 5.1 kg

Stick electrodes 3.2 x 450 -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Specifications: - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg

x-travel: 970 mm y-travel: 420 mm z-travel: 430 mm Control: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/min feed range lengthways and crosswise: 8-2000 mm/min feed range - vertical: 4-1000 mm/min rapid traverse longitudinal and cross: 4 m/min rapid traverse Z-axis: 2 m/min weight of the machine ca.: ca. 3,8 t dimensions: ca. 3050x2350x2320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Käde packaging machine

sheet width - max.: 0100 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

Stick electrodes 4.0 x 450 -Type: Phoenix K 50 -Price: per package -Number: 5 packages available -Weight per package: 5.8 kg

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -Handover: in its current condition as inspected -Condition: Sold as a parts donor without light bulbs (without light bulbs) -Case dimensions: 520/220H440 mm -Weight: 16.4 kg

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 25 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 78/80/H80 mm -Weight: 0.75 kg/piece

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.

Gebr. Kemper bread plant, overhauled, with round and long knitting Kemper Superba SU-BR-2500G, 270 cm long round beam, with Kemper BE-13 bucket elevator

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Dimensions: 315/200/H240 mm -Weight: 16.2 kg

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

amount: 42 STK - Various KOMET tool holders, partly holder with ABS connection - including tightening bolts (41 pcs.) and various other tool holders, including storage and transport trolley transport trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Gebrauchte Besuchen sie unsere große Bäckereimaschinen Ausstellung!

Centrifugal pump, water pump, immersion pump -Delivery rate: 2 l/min -Motor power: 0.18 kW -Connection: 220-290/380-500 V -Speed: 2700 rpm -Tropicalized: IP 44 -Dimensions: 190/131/H247 mm -Weight: 5.4 kg

Used labeling machine made by Exelsior Karvina s.r.o. (Czech Republic)

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Gear motor, electric motor -Speed: 90 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Dimensions: 500/220/H240 mm -Weight: 27 kg

Kemper Dough Weigher Kemper Abwieger Type: Imperator CT large plastic funnel with oil sprayer with long discharge conveyor Adjustable speed with bemehler can be moved on castors Year of construction: 2005 400 volts / 50 Hz Fuse 16 A Height: 185cm Width: 140cm Depth: 70cm

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -adjustable depths: 5 -Dimensions: 210/100/H400 mm -Weight: 2.4 kg

Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Kohler Engine: KDW1003 Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: LINZ Generator type: Alumen Generator power: 8 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.9 Speed: 1500 rpm Switchgear: Execution: Key Startup Functions: Hand start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 66 Dimensions of the power unit: Width approx. mm: 1.400 Height approx. mm: 2.500 Length approx. mm: 2.400 Weight approx. KG: 824 Condition: Demonstration machine Year of construction: 2020  ...

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 4 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm -Dimensions: 475/220/H160 mm -Weight: 18 kg

GEBR. Für weitere Informationen kontaktieren Sie mich bitte

For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)

Radial drilling machine, used Manufacturer: KOVOSVIT Type: VO 50 Year built:1999 Projection: 1600 mm Drilling capacity: 60 mm Quill stroke 310 mm Table / footprint 1470 x 986 mm Weight: approx. 5 t