128,440 used machines on RESALE, but how to find them? Machine Search
Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.
; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995
; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344
Approved for HVO use; Gross weight [kg]: 1490; Engine: Rehlko KD39L04T-AA56; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: cooland heater and battery charger; Water Tank Volume [l]: 181
; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1200
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Incl. Coolant Heater and Battery Charger; Gross weight [kg]: 3177; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Requesting a EUR.1 Certificate is possible for this Generator set., , Warranty:, 1 year for continuous use, 2 years for standby use; Water Tank Volume [l]: 995
The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.
TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...
We offer LTG-TowerMax L 20.0-250-1250-825-7200 vertical storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 7200 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical ma ...
Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut
Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece
Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1
; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87
; Gross weight [kg]: 1102; Engine: Cummins 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.
New glass depalletizer KHS type: Innopal Lord II ASN year of manufacturing: 2000 capacity. 30.000 bph with Siemens S 7 electric, incl. pallet transport and pallet magazine incl. sheet layer removal system The machine is depalletizing the empty bottles on a height at approx. 1.150 mm.
Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.
Load per column: 0 Load per cantilever: 0 Cantilever lenght: 250-800 mm Rack height: 2250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.
Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.
For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985
Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.
Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997
Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997
Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990
Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995
Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003
maximum number of results exceeded
please refine your search
