k und f used for sale

Fork carrier or tine adjustment device incl. 4 tines for Kalmar DCF 60 Kaup 4T419N4, used, tight, ready for use

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

KÜBA evaporator type SHB 127 with 3 fans diameter 710mm, lamellar distance 8mm, with new defrost heater. 107 liters capacity. 3 pcs.

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Used dough portioner W&P KEMPER, Type: Relaxer S - Dough strand length: up to 850 mm - Dough string size: H 110 x W 165 x L 850 mm - Power: 4 strands per minute (240 pcs/h) - TA 50 - 80% (50-80ml water on 1kg flour) - Hopper capacity: approx. 160 kg dough - Funnel size: L 720 x W 600 mm - Dimensions: 1.830 x 750 x H 1.500mm - refurbished, excellent condition - Warranty: 6 months The machine has been completely overhauled and is in excellent condition. Viewing and test run are possible by arrangement.

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Stainless steel machine Capacity: approx. 300 boxes/h

; Gross weight [kg]: 2550; Engine: Volvo TAD840GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 400

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

; Gross weight [kg]: 5500; Engine: Hyundai DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 900

; Gross weight [kg]: 5650; Engine: Hyundai DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1130

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

weight max. in kg: kg fork length: mm stroke height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Kärcher HDS 895 is a powerful, heatable hot water high-pressure cleaner (steam jet) of the professional class. Technical Highlights & Performance Operation: The device runs via a 400V three-phase connection. Temperature: It reaches temperatures of up to approx. 98°C in hot water mode and has a special steam stage that can deliver up to 155°C. Pressure & Flow: Depending on the model variant (e.g. S, SX or Super), it delivers a working pressure of around 30 to 180 bar at a flow rate of approx. 400 to 1000 l/h. Special feature: In the steam stage (above 98°C), the pressure must be limited to a maximum of 32 bar for safety, for which a special steam wand is often required.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Plastic Modular Belts/ Belt Conveyors Condition: Used Year of construction: 2016/ 2017 Total length: approx. 6500 mm Total width incl. motor/feet: approx. 1950 mm Total width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveying height (height-adjustable): approx. 410 to 450 mm Material: Steel/ Plastic Strap Type: Plastic Colour: Light Grey/ Dark Grey Including SEW motor (0.75 KW) with Movimot (speed adjustable) Feet included (height adjustable) Stock: 7 pieces Price per piece Internal Article Number: 2026021103 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for ...

Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers

; Gross weight [kg]: 100; Accessories: SAE4#7, 5

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

; Gross weight [kg]: 1500

Description dry running rotary vane vacuum pump Becker KVT 3.140 YOC 2006 little run technical data on type plate

90° angular gearbox from Kumera Norgear, model KV1V-DB 450kW Input 1422 Ratio 2.4:1 ~700kg With all standard attachments

; Gross weight [kg]: 944

; Gross weight [kg]: 1414

; Gross weight [kg]: 854

; Gross weight [kg]: 652

; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014