k und f used for sale

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15° Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

ITEM NO. SP6-FU-DC - Flow rate max. 19,380 ltr./hour infinitely variable and energy-saving by frequency converter - Power 4.2 kW - Stainless steel housing - Thread NW 65 - 1 year functional warranty

General SKU001B020 MakeKrauss Maffei TypeHZ-63 si No.9352 Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Motor18.5 KW Inlet diameter630 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesdia. 630x300mm Wall thickness15mm Max. loading weight50 KG Hydraulic drivecheck With hydraulic unitcheck Motor18,5 KW, 380 Volt (Ex) Max. basket speed2400 Rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor1,3 KW, 380-420/655-725 Volt (Ex) MaterialStainless steel 1.4571 (316Ti), Stainless steel 1.4581 (316Nb) With jacketcheck General Floorspace2,5x1,8 m Total height1,7 m Weight4000 kg ATEX designedcheckPeeling centrifugesDiscountKrauss MaffeiCentrifuges > Peeling centrifugesDiscountBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...

saw band length: 2910 x 27 x 0,90 mm Control: Kasto CompactControll capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 200 mm capacity 60 degrees: round: 165 mm cutting speed: 20-110 m/min min. dia.: 10 mm Cutting Length min.: 6 mm total power requirement: 2,5 kW weight of the machine ca.: 0,86 t dimensions of the machine ca.: 1,8 x 1,8 x 1,7 m Fully automatic band saw (CNC) Includes right-hand roller conveyor with programmable stop carriage & digital display: Stop positioning is handled by the integrated measuring system, with the position shown to millimeter precision on the separate display. Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m. Max. measuring length: 2.30 m. Includes hydraulic clamping and feed unit Includes coolant system Includes work light Includes small parts and spare parts Inc ...

Manufacturer: Krupp-Kautex Machine Type: KB50 Year of Make: 1987 Guard Locking 500kN Blowing volume 120 litres Max. WZ weight: 2x750kg Panel size horizontal x vertical: 700mm x 800mm Opening path: 2x 350mm Max. opening width: 1300mm Minimum tool installation height: 2x 320mm Connections for pneumatic functions: 6 Connections for hydraulic functions: 4 Blowing head: Battery head 5 liters Nozzle diameter min/max: 30/200mm (nozzle assortment available) Extruder: Helibar Screw diameter: 80mm L/D Ratio: 20 Plasticizing capacity: 175kg/h at 40 1/min, 350kg/h at 84 1/min Control: MOOG TMC4 Accessories: Debutzstation with linear device and various conveyor belts (incl.) • Machine fully functional • Demonstration in wet or dry running possible • Availability: immediately

Radial Drilling Machine KOLB KR 55 Spindle Ø 80 mm Cone CM5 Spindle exit: 400 mm Rotation: from 18 to 2000 RPM Table size: 1800 x 1000 mm Arm travel: 1250 mm Auto descent Auto rise according to the 0 setting Year of construction: 1990 Maxi distance spindle nose/table: 1500 mm Mini distance spindle nose/table: 800 mm Column diameter: Ø 315 mm Drilling/tapping function Rotation at 360° Possibility of sensory drilling Automatic gearbox Lubrification Hydraulic locking Voltage: 380 V Dimensions (L x W x H): 2900 x 1100 x 3060 mm Weight: approx 5 T

-Year 2003 -Only 44 mil. impressions -Max size 52x74 cms. / Straight machine 5/0 -Min size 21x29,7 cms. -Colortronic table control for remote controls, preset of the paper size -Rollers, impression cylinders and blankets automatic washing devices -Semi automatic plate change SAPC -Varidamp alcool dampening -Technotrans alpha D refrigeration system with Alcolsmart AZR -All accessories and parts -In production, any test is possible

Key data: 1200 m³/h, 1 kW

For sale I offer a mobile welding fume extraction system Kemper cartridge filter system 7000 from 1997. has been checked and is given. The extraction system is in good condition for its age and has hardly been . Shipping available for an extra charge. Extraction is tested and sold immediately ready for use with a new UVV test and operating instructions. # Extraction # Kemper # System # 7000 # Fume extraction # Cartridge filter # Extraction system # Mobile

Manufacturer: Kautex Machine Type: KBS2-120 Year of Make: 2004 Guard locking 1,000 kN Blowing volume 220 litres Max. WZ weight: 2x 2500kg Railbar spacing horizontal/vertical: 1500 / 1600 mm Panel size horizontal x vertical: 1200mm x 1200mm Opening path: 2x 400mm Max. opening width: 1600mm Minimum tool installation height: 2x 400mm Die head: Battery head 8 liters Nozzle diameter min/max: 100/300mm (nozzle assortment available) Extruder: Helibar Screw diameter: 100mm L/D Ratio: 24 Control: SIG Kautex Accessories: various technology on request • Machine fully functional • Demonstration in wet or dry running possible

Temperature distribution in 2 zones, electric hoists, Belt width: 600 mm, Cooking length: 13000 mm, Heating: Steam, 780kg/h (6 bar), Steam pressure: 4 - 8 Bar, Power: 3 x 380V, 50Hz, 1.5kW, Dimensions: 14400 x 2000 x 2700 mm, Weight: 4850 kg

With top hold down belt, circulation pump, electric hoists, Belt width: 900 mm, Cooking length: 8000 mm, Power: 3 x 380V, 50Hz, 0.43kW, Dimensions: 9000 x 1800 x 3850 mm, Weight: 5200 kg

Including:, Goedhart BV evaporator, Type: LLK.s 411m², Year of construction: 2010, Capacity: 135 dm³, Refrigerant: NH3, Working pressure: 22 bar, Test pressure: 32 bar, Weight: 770 kg, Belt width nett: 940 mm, Tiers: 3, Belt length: 5800 mm, Power: 3 x 380V, 50Hz, 0.37kW, Dimensions: 7200 x 1400 x 2900 mm, Weight: 2850 kg

Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Output: 20,000 bph Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl Pitch circle diameter: 600 mm No servo drive of the plates Infeed and output direction 90° Rotation: counter clockwise 36,000 operating hours Glue pumps included working direction: counter clockwise

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll year of manufacture: 2008 labelling applicators: 2 (wet-glue heads) operation Direction: Right-machine, parallel on one side of the machine production Capacity: 45.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Manufacturer: KHS Model: Innoket Roland 10/4 Year of manufacture: 2009 Bottle type: Square bottles Output: up to 20,000 bottles per hour Label Formats Available - Wet glue labels (VE and RE formats) - Self-adhesive labels Format Sizes - 250 ml - 33 x 119 mm - 500 ml - 36 x 150 mm - 750 ml - 48 x 158 mm Spare Parts - Many spare parts available including stamps, glue roller, scraper, and roller sponges. Find more here - / Contact us at -

wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 kN

Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg

Dividing head, spiral milling attachment, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Dividing head: rotatable/tiltable -Receiver/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Overview This Krones Robot 3A unloading robot, manufactured in 2003, is designed for the automatic handling of full beverage crates on Euro pallets. The system is used for unloading complete crate layers from pallets. The machine handles actually 1.0 l PET crates in an 8-crate layer pattern and is configured for crates with dimensions of 400 x 300 x 310 mm on Euro pallets measuring 1200 x 800 x 144 mm. During operation, a mechanical gripper head lifts a complete layer of beverage crates from the pallet and transfers it horizontally within the unloading area. The system is equipped with an MTS 10 operator panel, showing program operation and pallet handling status. The working area is protected by safety fencing and access doors. Technical Data Manufacturer: Krones AG / Kettner Machine Type: Robot unloading system / crate depalletising robot Machine Designation: Kettner Robot 3A Year of M ...

Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data Capacity: approx. 33,000 bottles/hour Formats: 0.75 GDB DN2 0.5 L longneck beer 0.33 L longneck 0.25 L individual bottle Application: Cold-glue labelling of beverage bottles Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates Label positions: Front, back, neck Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

axis stroke (X,Y,Z): 6175x1550x300 mm Number of spindle head vertical: 20 St. Number of spindles head horizontal: 10 St. Number of milling agregates: 1 St. Speed: 24.000 U/min. Capacity: 300 kg/h Sawing unit: ja_yes 0 Control: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----------------------------------- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customers truck - Costs for loading frames/transport securing devices NOT included, see note at the end of the description Technical Data ----------------------------------- Max. workpiece lengths: All aggregates: Single 6,000 mm, Pendulum min. 1,550 mm ...

cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-cha ...

Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 ME ...

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

workpiece diameter:5-125 mm grinding depth:50-1000 mm clamping length:1000 mm total power requirement:1.9 KVA weight of the machine ca.:630 kg max. workpiece weight:100 kg Center Hole Grinding Machine. Workpiece must be rotated by machine during grinding

x-travel:600 mm y-travel:580 mm z-travel:530 mm distance spindle center to column:630 mm distance spindle center to table:100-600 mm milling feed range:1-10.000 mm/min max. table load:200/100 kg max. tool weight:8 kg positioning accuracy:+/- 0,01 mm :8000/15000 1/min spindle drive:7,5/11,5 /5,5 kW repeating accuracy:+/- 0,008 mm weight of the machine ca.:7,4 / 7,65 t Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN Warranty: 12 months More information can be found in the Appendix.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.

max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm

grinding length:1500 mm centre height:325 mm weight of the machine ca.:12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system

measuring range X-axis:-50 . 530/830/1030 mm measurement range Z =:605/805/1005 mm tool taper:30 & 40 VDI compressed air:6 bar dimensions:2200 x 1200 x 2100 m machine weight ab.:900 kg Vertical Toolsetter with Cutting Edge detection via Camera System. Operating over CNC Control yb PC System or Manually, 3 axes, CNC Equipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axis and Linear Roller bearing in all Axis of the Slide Carriage. Electronic measuring equipment: PC electronics with intelligent KELCH EasyVision image processing 17" TFT colour monitor Optional: second 17" TFT monitor for full screen measuring window The CNC Toolsetter is in good condition and ready for immediate use.

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

Keyence Digital Measuring Projector ? Model XM-1600 General: Digital measuring projector with a high resolution image measurement system and very easy operation. Place the part on the stage and measure by pressing a button. Supports automated measurements of up to 300 dimensions within seconds. Measuring Head / Control Unit: ·Sensor: Monochrome CMOS 1 inch, 20 megapixels ·Display: 12.1 inch LCD monitor (WXGA 1280 x 800) ·Lens: Double telecentric lens Measuring Field and Measuring Range: ·Standard measuring field: approx. 100 mm diameter ·Precision mode measuring field: approx. 25 x 25 mm Measurement Accuracy and Repeatability: ·Display resolution: 0.1 micrometer ·Repeatability (standard, without stage movement): approx. plus minus 1 micrometer ·Precision mode (without stage movement): approx. plus minus 0.5 micrometer Stage / Travel Axes: ·XY measuring stage: motorized ·Z axis ...

turning diameter:500 mm turning length:1500 mm Technical Specifications: ·Turning diameter over cross slide: 290 mm ·Spindle bore: 71 mm ·Speed range: 3?2,800 rpm ·Rapid traverse speed: 10 / 5 m/min ·Feed rate: 1?2,000 mm/min ·Total power requirement: 22 kW ·Machine weight: approx. 3.2 t ·Space requirement: approx. 3.0 × 1.6 × 2.0 m

turning diameter:830 mm turning length:4.000 mm turning diameter over bed slide:540 spindle bore:130 mm turning speed range:2 - 1.600 U/min rapid speed:4/5 m/min feed speeds:1 - 2.000 mm/min total power requirement:55 kW dimensions of the machine ca.:7 x 2,2 x 2 m weight of the machine ca.:7,5 t

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

cutting diameter:260 mm band length:450 x 4 x2 mm total power requirement:22,6 kW weight of the machine ca.:1024 kg dimensions of the machine ca.:1500 x 2310 x 955 mm square:240 x 240 mm flat material:260 x 180 clamping capacity:40 bar Documents:vorhanden

grinding diameter:600 mm grinding length:3000 mm centre height:315 mm workpiece weight max.:3000 kg work piece spindle speed:8 - 120 U/min grinding wheel motor:25 kW grinding wheel speed:45 m/sec grinding wheel width x diameter:750 x 80 mm table speeds:30 - 4500 mm/min feeds of grinding head:0 - 5 mm/min table swivelabel +/-:7,5 ° total power requirement:55 kVA weight of the machine ca.:18 t dimensions of the machine ca.:11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests

turning diameter:830 mm turning length:4000 mm turning diameter over bed slide:540 mm spindle bore:130 mm turning speed range:2 - 1600 U/min rapid speed:4 / 5 m/min feed speeds:1 - 2000 mm/min total power requirement:55 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment