k und f used for sale

An automatic Kasto dual-tower storage system is available. Cassette usable dimensions X/Y/Z: 6500mm/840mm/440mm, cassette external dimensions X/Y/Z: 6620mm/976mm/485mm, C-profile height: 245mm, max. cassette payload: 1000kg, storage locations: 49, lifting unit speed: 22m/min, pull and push speed: 20m/min, system performance: 30double cycles/h, overall system dimensions X/Y/Z: approx. 7600mm/7250mm/7900mm. Documentation available. An on-site inspection is possible.

- Smallest diameter 10 mm - Shortes length singel stroke 15 mm - Shortes length automatic mode 100 mm - Working height 700 mm - Max. stroke 9999 mm - Control panel  - Memory 99 program with  - Bundel clamp device  - Chip conveyor - New price 45.000

Edge banding machine Type: O KDF 560 2C Manufacturer: Brandt Year: 2008 Machine after complete service Counter: 1600 m Finished lower and upper cidliny. Machine in good condition, fully functional Find more here - / Contact us at -

rotary table diameter: 600 mm boring diameter: 600 mm drilling depth: mm grinding height: 450 mm grinding head - power requirement: kW control: Siemens Sinumerik 840 C total power requirement: 30 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

wire diameter 10-16 mm feed legth 100-250 mm pitch 5x dia. output pieces/min 25-50

wire diameter 2-7 mm output - pieces/min 100

wire diameter 1- 5 mm speed - meter/min ca. 15

diameter range 0,4-2,4 mm feeding length 12-110 mm flange length max 75 mm working width 40 mm output pieces/min 420

press power 1000 to clear width 585 mm daylight 410 mm stroke 380 mm table size 0/ 700 mm

bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 8-22 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 155 mm output - pieces/min 105 press power 250 to

bushing cut-off , PKO , IFO diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 280 mm shaft length under head 220(260) mm output - pieces/min 40-75 press power 100 t

diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 17.003-112/3 12 spirals -Dimensions: see photos -Overall dimensions: 1240/340/22 mm -Weight: 6.3 kg

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 6 spirals -Dimensions: see photos -Overall dimensions: 1235/210/22 mm -Weight: 3.3 kg

Schaeff-Terex HR 32 Crawler Excavator, - Year of manufacture 2005, - Weight: approx. 8000 kg, - Power: 54 kW

This 6-axis KUKA KR 16-2 with KRC 4 was manufactured in 2013. It features a maximum reach of 1611 mm and a rated payload of 16 kg. The machine includes an articulated robot arm, KRC4 control cabinet, KUKA smartPAD teach pendant, and an end-effector/gripper unit. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 with KRC 4 robot arm we have for sale. Contact us for further details.

: neu : 2026 : 090203 : prompt, Zwischenverkauf v : Türkei : 3810 € : 1 : 1020 mm : 1.5 mm : 500 mm : 1950 mm : 1000 mm : 1150 mm : 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 2004 Single Station Machine Clamping force: 10 tons. for the production of 5-10 liter canisters incl. single and double head Wall thickness control: 64 points Machine is in good condition and immediately available

Only available until 27.06.26! Banding roller including steel belt roll for fastening e.g. containers, heavy loads on Euro pallets, etc. Includes clamps and 3 rolls of steel straps. Delivery by pick-up.

This 6-axis KUKA KR 16-2 with KRC 4 was manufactured in 2012. It features a load capacity of 16 kg and a range of 1611 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 with KRC 4 robot arm we have for sale. Contact us for further details regarding this machine.

This 6-axis KUKA KR30-3 robot arm was manufactured in 2015. It features a payload capacity of 30 kg and a reach of 2,033 mm, making it suitable for various applications. With a teach panel and KR C4 controller included, this machine offers flexibility and efficiency. If you are looking to get high-quality automation capabilities, consider the KUKA KR30-3 robot arm we have for sale. Contact us for further details.

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

This 6-axis KUKA KR 30L16-2 with KRC 4 was manufactured in 2019. It features a maximum reach of 3102 mm and a rated payload capacity of 16 kg. If you are looking to get high-quality robotic automation capabilities, consider the KUKA KR 30L16-2 robot arm we have for sale. Contact us for further details.

A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible.

This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details.

This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2013. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.

This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2017. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.

This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2012. It features a reach of 3,102 mm and a payload capacity of 16 kg, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.

A Mimaki UV printer including a Kühnast UV conveyor dryer is available. 1) Mimaki UJF-3042 UV LED flatbed printer, year of manufacture: 2010, print dimensions X/Y: 300mm/420mm, max. material height: 50mm, max. print resolution X/Y: 1440dpi/1200dpi, machine dimensions X/Y/Z: approx. 1200mm/1000mm/800mm, weight: approx. 120kg. 2) Kühnast 3000 UV conveyor dryer, year of manufacture: 1998. Both machines must be inspected. An on-site inspection is possible.

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

- Range off edge radius Manual 20 - 500 - Range off edge radius Automatic 150 - 500 - Hydraulic Controllable forming roll drive - Hydraulic displacement drive - Clamping device without hole - Max. pressure manipulator 2000 Psi / 140 bar - Max. pressure press 5700 Psi / 400 bar - Max. speed forming roll 170 M/Min - Kunkel head forming rolls: - R = 350 - R = 300 - R = 275 - R = 250 - R = 200 - R = 175 - R = 150   - Basket bottem - Knocker bottom - Pressure vessel bottom - Boiler bottoms - Flat floor - Plate base - diffuser bottom - Tank bottom - Tank bottom - Radar reflectors - Engine parts - Dispense air - Silo hoppers - Cooker hoods - Container parts - Hemispheres

Press brake manufactured in 2021. This KNUTH AHK H 30270 features a pressing force of 270 t and a bending length of 3,100 mm. It includes a Cyberlec Touch 8 Controller and a motorized CNC anti-winding system for enhanced precision. The machine is equipped with front support arms sliding on linear guides and a pedal drive for ease of operation. If you are looking to get high-quality bending capabilities, consider the KNUTH AHK H 30270 press brake we have for sale. Contact us for further details.

This 6-axis KUKA KR16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a maximum reach of 1650 mm. Versatile mounting options include floor, inverted, or angled setups. Ideal for material handling, assembly, welding, and more. Weighs approximately 280 kg. Compatible with KUKA KR C2 or KR C3 series controllers. Contact us for more information about this machine.

This 6-axis KUKA KR 20 R3100 / SEL was manufactured in 2022. It features a payload capacity of 20 kg and a reach of 3,101 mm, making it suitable for material handling and pick & place applications. The robot is equipped with a KUKA Robot Controller and includes a teach panel. If you are looking to get high-quality material handling capabilities, consider the KUKA KR 20 R3100 / SEL robot arm we have for sale. Contact us for further details.

This 6-axis KUKA KR 16-2 mit KRC 4 was manufactured in 2011. It features a load capacity of 16 kg and a range of 1611 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.

This 6-axis KUKA PWG + PSD-B-Schiene / KR 16-2 was manufactured in 2015. It features a robot range of 1611 mm and a load capacity of 16 kg, making it suitable for various applications. The machine includes a complete soundproofing enclosure, exhaust ducting, and an integrated KUKA smartPAD teach pendant. If you are looking to get high-quality robotic brushing capabilities, consider the KUKA PWG + PSD-B-Schiene / KR 16-2 machine we have for sale. Contact us for further details.

x-travel: 2700 mm y-travel: 1250 mm z-travel: 1150 mm Control: Heidenhain type: TNC 426 : spindle turning speed range: 56-3150 U/min Table area: 3800x1000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for t ...

Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995              Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008                bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 22 on 2,5L / 2 on 5L)

Work table AT 3000 with stainless steel plate & container 12 containers of 25 kg each Drawer block on the right Reinforced construction welded Dimensions: 3000 x 800 x 850 mm WxDxH Used device

Weigher Kemper Imperator II with manual control Central lubrication with industrial plastic hopper Dimensions: 1790 x 850 x 1800 mm, WxDxH Used machine

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging / Weighing / Labeling KUCHLER S.A.M. P3 Technical data: Slicer type: SAM P3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Scale/Labeler: Mettler Toledo PAZ UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2015 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 45,000 The display of the P3 cutting machine is defective. Therefore, sold as DEFECT / SPARE PARTS SPEDNER! Condition, see original pictures! If you have any questions, email or call.

Inv. Num. : 9267 Type: SF210-K3200C Producer: Chaifu Created: 2024 Parameters: Maximum arm reach: 3200 mm Maximum load capacity: 210 kg Machine weight: 1950 kg Height: 2543 mm

Single-end machine for cleaning glass bottles., Additional title: Bottle washing machine, Capacity: 3000 bottles/h, Length: 4,43 m, Width: 2,60 m, Height: 2,52 m, Base construction: Single-end machine, Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Labelling machine for wrap-around belly labelling of 0.5 and 1.0 l PET bottles. The paper labels are glued to the bottle with hot glue., Additional title: wrap-around labelling, Capacity: 24000 b/h, Current: 18 A, Voltage: 400 V, Frequency: 50 Hz, Formats: PET bottles, 0,5 l, 1,0 l, 1,5 l, Running direction: left -> right, Operation / Control: Simatic S 7-300, Material: stainless steel housing, Position: free standing, Base construction: rectangular, enclosed machine, on spherical feet, Features: housing with viewing window, labelling module for wrap-around paper labels, Robatech hot melt melter , Periphery: Leibinger Jet 3, best-before date printer

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...