k und f used for sale

General SKU117W596 MakeKrauss Maffei TypeVZO-125/2,5 No.9708 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Motor30 KW Inlet diameter1250 mm Specified Features - Basket centrifuge Basket centrifuge(1x) Perforated basketcheck Basket sizesdia. 1250x630mm Wall thickness12mm Max. loading weight485 KG With scrapercheck Hydraulic operated(motor hydr. unit 0,55 KW 220/380 Volt Ex) Liquid outlet165x165mm Motor17,0/30,0 KW, 390 volt (Ex) Max. basket speed950 Rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,4x1,8 M Total height2,8 M ATEX compatiblecheckDiscountBasket centrifugesKrauss MaffeiDiscountCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

Automatische roterende freeskop: 90° en 45° Automatische gereedschapswisselaar met 30 posities spanentransporteur koelunit + filter maximaal werkstukgewicht 6 ton Longitudinal travel X-axe: 1700 mm Cross travel Y-axe: 1200 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 2000 x 1000 mm Max height workpiece: 934 mm Power on spindle: 22 kW Admission in millinghead (ISO): BT50 Max speedrange: 35 > 3000 rpm Control: Heidenhain Power needed (KVA): 56 kVa Length : 5300 mm Depth: 4950 mm Height: 2800 mm Weight: 18 ton

plate thickness: 3 mm angle adjustable from - to: 30 - 120 Grad table height: 900 mm weight: ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel, cutting angle continuously adjustable from 30° to 120°, pneumatic clamping for angle adjustment (Boschert system), machine is in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.

Stock# U2472 Used vertical stainless steel contact parts by Probst & Class (PUC) type K100/0. Mill is directly driven by el motor 5.5 kW, 2905 rpm, 380 V, 50 Hz. Mill has stainless steel conical feeding hopper. Machine is mounted on stainless steel supporting frame.

Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm

used sheeter Seewer Rondo Kombi 614, overhauled, Masch.-Nr. 0617 01

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

CNC circular saw Type: KKS 451 CNC Manufacturer: Kaltenbach Year: 2014 CNC control + touchscreen PROFICUT Saw blade diameter: 450 mm Motor power: 1.8 / 2.7 kW Selectable power: 4.0 or 5.5 kW Cutting speeds: 10/20 – 13/26 – 15/30 m/min Selectable regulation: 7–43 or 15–75 m/min Saw feed: 0–1000 mm/min Rapid return feed: 3500 mm/min Single material feed: 10–2000 mm Multiple feed up to 9999 mm Max. round material: 150 mm Max. square: 140 mm Max. flat material: 240 × 80 mm Angling range: ±60° Rotating range: 120° Tool type: HSS discs Table magazine for up to 6 meters of material Machine weight: 2500 kg Dimensions: 3300 × 1420 × 2100 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

CONTROLS   electronic controls TECHNICAL SPECIFICATION   max. diameter of saw blade: 260 mm   cutting capacity round: 260 mm   cutting capacity square: 260 mm   mitre cutting: yes   cutting range     round: 260 mm   .. oblong: 400 mm TECHNICAL SPECIFICATION   max. cutting height: 260 mm   sawband length: 4310 mm   sawband width: 0.9 mm   cutting speed min.: 17 m/min   cutting speed max.: 90 m/min   power of band drive: 2.2 kW ELECTRICAL SPECIFICATIONS   total power consumption: 3.2 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2100 mm   total height: 2000 mm   total weight approx.: 1220 kg Machine overhauled, cleaned, and all oils replaced! The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container ...

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

CONTROLS   PLC TECHNICAL SPECIFICATION   max. cutting height: 360 mm   sawband length: 5334 mm   sawband width: 41 mm   max. bar feed (single stroke): 600 mm   cutting speed min.: 14 m/min   cutting speed max.: 102 m/min   power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS   total power consumption: 10 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 2840 mm   space requirements -front/back-: 2800 mm   total height: 2130 mm   total weight approx.: 2540 kg

- Cooling lubricant basin   - Filtecci filter system   - Grundfos CR 90-2 (standard)   - GEA plate heat exchanger   - Collecting tray fleece according to ZNG - if required or container   - Transport trolley fleece according to ZNG - if required or container   - LxWxH 4500x2600x2100 - Emulsion capacity 1500 l/min at 4 bar

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Heating oil tank, 27.000 litres for heating oil / diesel – used - : Price: only 9.950.-€ (net) ex site, emptied, cleaned and incl. loading! Manufacturer: Kampitz Manufacturer Part Number: 42089 Year of Make: 2022 Type: Z 38 12-312 Volume: at permissible filling height: 27.82m3 Permissible. Filling Degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55 degrees C Permissible density: 1.0 kg/ltr. Test pressure storage space: 2.60 mWs Test pressure leak monitoring room: -0.60bar Max. medium temperature: 50 degrees C Medium: Heating Oil / Diesel Condition: good Available: immediately Location: Bünde, NRW

Equipments: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

KUKA Robot KR 10 R1100 sixx robot (367 operating hours) Year of manufacture: 10/2016 Load: 10 kg Reach: 1101 mm Smart Pad: KRC4 00-168-334 Control: KRC4 compact Cable: yes Colour: white Operating hours: 367 h Condition: good condition, only in operation for test purposes Note: Touchscreen on the smartpad is defective, robot was in a development center for test purposes

Robot KUKA Robot KR 270 R2700 ultra (unused 0 operating hours) Year of manufacture: 10/2018 Load: 270 kg Reach: 2696 mm Smart Pad: KRC4 00-168-334 Control: KRC4 Cable: yes Colour: orange Operating hours: 0 h Condition: Machine unused - in original box Remark: incl. bracket +500mm (optional) Robot was in a development center for test purposes

High-performance mechanical automatic punching machine with coil system for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine Type: Automatic Punching Machine Year of Make: 1994 Press force: 3150 kN Drive type: mechanical Stroke rate: 20 – 120 1/min Plunger stroke: 20 – 150 mm Plunger adjustment: 150 mm Table surface: 1780 x 1250 mm Plunger area: 1500 x 1000 mm Installation height: 565 mm Tool weight max.: 3000 kg Strip width: 30 – 800 mm Band thickness: 0.5 – 3 mm Max. strap thickness: 4 mm Strip infeed height: 160 – 260 mm Belt speed: 4 – 30 m/min Straightening rollers: 9 pieces Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

KUKA Robot KR 10 R900 sixx robot (85.7 operating hours) Year of manufacture: 02/2017 Load: 10 kg Reach: 901.5 mm Smart Pad: KRC4 00-168-334 Control: KRC4 compact Cable: yes Colour: orange Operating hours: 85.7 h Condition: perfect condition, only in operation for test purposes Note: Robot was in a development center for testing purposes

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...

A Klieverik roll-to-roll sublimation and transfer printing calendar is available. Media width: 3200mm, max. working width: 3200mm, heating cylinder diameter: 195mm, max. temperature: 220°C, process speed: 1.25m/min, production capacity: approx. 135m²/h. Machine dimensions X/Y/Z: approx. 4150mm/1200mm/1550mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

List of spare parts for Krauss-Maffei MC3 injection moulding machine (KM 1600 T & 2300 T) 1 Calzoni MRE3100I hydraulic laminating motor reconditioned by FHP 1 LCD screen Voith variable flow triple pump : Type IPV /7-250 and Type : IPV7-200 VT 5041 Power Boards 2 VT-VRPA power cards (Orginal Packaging) 1 VT-VRRA power card (Orginal Packaging) 1 keyboard 1 LCD screen 2 GR 400 cards (Orginal Packaging) 2 AE 501 cards(Orginal Packaging) 1 SE 502 card (Orginal Packaging) 1 IO 502 card (Orginal Packaging) 1 NT 500 transformer 3 heating collars 10 KW

General SKU004U062 MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer Pre-mixerConical screw mixer (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm MaterialStainless steel 1.4541 (321) Information Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX compatiblecheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar) DiscountPre-mixersEngelsmannDiscountMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

Used Lifting Kneader KEMPER, Type: F 15 S -In Bakery Condition- - for 15 kg flour or 24 kg dough - New stainless steel boiler - 3 gears / speeds - with protective grille - Technically everything tested and cleaned - Very smooth running - Condition very good - Video can be sent Visits and test runs are possible by arrangement.

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...