135,014 used machines on RESALE, but how to find them? Machine Search
Machine Name: Used Sludge Dewatering Centrifuge Manufacturer: KHD / Hiller Type: CP3034/DP350422 VA HY Year of manufacture: 1997 / 2012 Material: V4A 14571 Max. drum speed: 4,200 rpm Inner diameter drum: 348 mm Drum wall thickness: 10 mm Inner drum length: 1,700 mm Ab. Sediment density: 1.30 kg/dm3 Max. operating temperature: 50 C° Dimensions: L 2,700 x W 1,400 x H 1,100 mm Curb weight: 2,880 kg Tech. Documentation: Yes Note: The rotor was replaced by Hiller in 2012 in a V4A stainless steel version, type: DP 350-422 VA HY Accessories: A control cabinet and a hydraulic system Condition: Used Price: On request
Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...
Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...
cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...
Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg
KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...
Key data: 18 , 8 , 3
Gyártó: Kaeser ASD 32T csavarkompresszor + hűtőszárító folyamatosan karbantartott! teljes dokumentáció Építési év: 2008 Névleges nyomás: 8 bar Levegőáram: 3,16 m3/min Levegőáram: 189,6 /óra Üzemóra: 87000 Hűtőszárító: ABT60 Sűrített levegő csatlakozása: G 1¼ Feszültség: 400 V/3 PH, 36 A Teljesítmény: 18,5 kW Motor fordulatszáma: 2945/min Környezeti hőmérséklet: 3 / 45°C A gép súlya: 745 A gép méretei: 1770 x 900 x 1530 mm
Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.
A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.
An industrial cutting system Kuris for textiles, films, or other flat materials is available. 1) Automatic servo cutter Kuris. 2) Spreading machine Kuris Pionier Super PC Electronic. An on-site inspection is possible. The system is dismantled and ready for loading.
Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.
Technical data of the steel girder: Manufacturer: Stow Type: Pal Rack NS The scope of delivery includes: 01x Steel beams, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Overall length: 3,835 mm Note: The steel girders were attached to a length of between 2,700 - 2,800 mm welded on a plate. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH) Since these are second-hand goods, scratches, damage, welds or rust roots! General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
A step conveyor Köberlein & Siegert is available. Step width: 850mm, step height: 600mm, step depth: 5.5mm, machine depth: 1300mm, machine height: approx. 3500mm. An on-site inspection is possible.
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg
HAVE A GDY SIR; WE VE 1 PC NEW ( OPEN BOX ) RCU 502 KONGSBERG REMOTE CONTROLLER. UNIT AT STOCK REV 2.0.2. F W 1.0.7.3 WE VE 1 PC NEW ( OPEN BOX ) UNUSED RMP 420S KONGSBERG REMOTE MULTIPURPOSE INPUT /OUTPUT UNIT AT STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Inv. Num. : 8609 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Control system: NESSAP Software: WRYKRYS Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 0.5 mm Maximum sheet thickness when cutting: 100 mm Plasma Source: Cebora 160A Cutting speed: 12 m/min
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x Pallet rack trusses, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN120|30 Agraffe: 3 HK (hook) Weight / piece: approx. 22.50 kg Clear width: approx. 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Manufacturer: KBA Model: 46DI Year of Manufacture: 2004 Type of Machine : 4-color offset printing press Includes transport pallet and server 5.8 million impressions total Production speed: 7,000 sheets per hour Comes with inks and maintenance materials (including 4x4 CMYK) Installation area: approx. 350 x 300 cm Complete maintenance performed in July 2022, including full disassembly, cleaning, and reassembly Find more here - / Contact us at -
Screw compressor Kaeser type DSG 290-2 SFC A Properties: Type DSG 290-2 SFC A Order no. 4500217106 Length 3450 mm Width 1800 mm Total height 2400 mm Material No. DSG2.3 Manufacturer Serial No. 1117 Rated power 200.0 kW Speed 2982 min ̄¹ Max. operating overpressure 8.5 bar Ab. Ambient temperature min./ max. 3/40 °C
Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine in production till end November 2025 Excellent machine and opportunity
KHS InnoPET Blomax 8 blow moulding machine Manufacturing year 2009 Capacity 14.400 bph Set for 8 quick change molds Personnalisation for preform neck 29/25 still mineral water Linear oven equipped low consumption Machine composed by: - preforms pallets tipper, hopper & feeder - PCC drive & control - KHS electrical cabinet - HP air recycling system The full air conveyor system EZS is available in option. Machine very well serviced is in exceptional condition. Machine in production till end June 2026
Carbonator KHS Process Technik CX 30 upgraded by KHS 2014 Processing carbonated mineral water at max 8 g/litre Capacity 30.000 litres per hour Equipment complete with pumps, tank, flowmeter and all its accessories Drive Siemens S7 Equipment in perfect working condition Was in production till March 2025 Still installed, will be dismantled Available immediately
saw blade diameter: 360 mm cutting width at round material: 15 - 100 mm cutting width at rectangle material: 15 - 80 mm cutting speed: 17 - 175 m/min Control: Easy Control KASTO total power requirement: 21 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
8 insert rollers for Kalmeijer. more on baemm.eu.
For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...
For sale is an unused Kambic I-250 CKA refrigerated incubator. For technical data, see Appendix.
weight of the machine ca.: 6,6 t control: monforts control : 2 centre distance: 3010 mm centre height: 310 mm tail stock: ja cooling: ja dimensions of the machine ca.: 5000-1600 mmxmmxmm spindle bore: 70 mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900
- Year of construction: 2022 Cooling: - from 30 °C to 25 °C = 29 kW - from 15 °C to 0 °C = 15.4 kW - Connected load : 8.8kW, 15.6A - Dimensions : 1.05m x 1.05m x 1.75m (L x W x H) - Machine in very good condition - Very few hours of operation!
Used bread roll line KÖNIG, type: Combiline with Basic Rex T5 - Head machine KÖNIG Basic Rex Year of manufacture: 2009 - Weight range: approx. 35 - 85 g - Number of rows: 5 / 4 / 3 - Capacity: 4,000 to 7,500 pcs./h - Pre-proofer - Maximum output head machine: approx. 4,000 to 7,500 pieces/h (depending on the product) The drum has to be replaced. The line is currently in bakery condition and will soon be dismantled by us. Visits and test runs are possible by arrangement.
Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.
Assortment of measuring tools, calipers Digital depth caliper Mitutoyo 571-203-10, measuring range 300mm Digital gate valve Garant 412601/150 (manufacturer probably Mitutoyo), measuring range 150mm Digital caliper unknown, measuring range 150mm Analogue caliper Expert, measuring range 300mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
x-travel: 400 mm y-travel: 320 mm z-travel: 440 mm table-size: 80 x 325 mm spindle taper ISO: Sk 40 spindle turning speed range: 63 - 3150 U/min quill stroke: 60 mm total power requirement: kW weight of the machine ca.: 1,5 t dimensions: 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -
2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -
diameter: 800 mm roll surface width: 1800 mm heating system: Sattdampf 0 0: 860 Liter 0: 5 bar max. temperature: 168 ° C weight: kg range L-W-H: 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Our KVK 1S – Economic is our cheapest way to purchase a semi-automatic stretch wrapper. This is a demonstration system. Only the application and separation of the film has to be done manually with this wrapper. The model is sturdily built with a weight of 600 kg and is designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and foil slide, as well as the mechanical brake, you can adapt the automated winding well to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot windings. There are programs for "up only" winding, "up & down" (cross winding) and "rainproof" winding available. If necessary, the winder can also be controlled manually. If the winder is to be used in a different place in between, it can be eas ...
Height=1.62 m, Overall length= 0.88 m, Overall width= 0.81 m, Net weight= 167 kg,
Height=1.48 m, Overall length= 1.33 m, Overall width= 0.67 m, Net weight= 355 kg,
maximum number of results exceeded
please refine your search
