134,721 used machines on RESALE, but how to find them? Machine Search
Demonstrator, slightly used, type: ND3T, 85 kg dead weight, with trailer coupling and K80 ball head coupling: +⬠180,- net excl. 20% VAT.
suitable for Augl, Schmidt, Boschung, Aebi 25cm steel brushes, outer diameter 70cm, Inside hole circle 20cm
NEW PRICE: 3,150.00 EURO Technical data: Volume flow ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Electrical power consumption at 100% vol.: 0.29 kW Electrical power consumption at 50% vol.: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Max. compressed air inlet temperature: 55°C Dimensions W x D x H: 630 x 484 x 779 mm Weight: 70 kg Compressed air connection: G 3/4 Condensate drain connection: G 1/4 Power supply: 230 V / 1 / 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered.
Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa
Soyer KTS 850 Working Area: X 800mm x Y 750mm Positioning accuracy according to the manufacturer: +/- 0.2 mm Welding range from M3-M10 to 40mm length 2 welding heads: Head 1 works perfectly, head 2 no longer welds reliably but works. Intuitive component programming via dxf data Machine completely enclosed with safety-monitored door Weight approx. 900kg 2x welding machines BMS-10N tip ignition according to DVS leaflet 0903 with gap and contact welding Weight approx. 20Kg 2x Universal vibrator UVR-300 Automatic bolt feeding from M3 to M8 and bushings up to M5 Weight approx. 48kg/vibrator plus accessories Other accessories: Various bolt holders for external threads from M3 to M8 Various push-in pistons with spacer rings for different bolt lengths Pneumatic Mass Tensioners Various feed hoses from M3 to M8 male thread
feed pressure: bar liter capacity: l power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4230 mm, 2100 mm, 850 mm
X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg
x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm turning speed range: 1 - 4000 U/min spindle taper ISO: 40 table surface area: 650 350 mm Control: Heidenhain TNC 124 total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m Equipment: Electronic handwheel Tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment.
Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.
Used Arol M-KAMMA PKV automatic capping machine for overcap caps (caps for pressure caps on bottles with 1881 thread). YEAR OF MANUFACTURE: 2013 NUMBER OF CAPPING HEADS: 24 DIVISION WHEEL DIAMETER: 720 mm CAPACITY: 45,000/h The set includes: octabin tipper, pneumatic transport and capping machine. Documentation in Polish and English.
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Net weight= 340 kg, net weight: ca. 340 kg electr. power: 230/400 V; 50 HZ power consumption: 1,6 kW condition: refurbished In stock Made in Germany Description Depositor Krumbein DSM is ideal for filling muffin tins silicone molds blisters cake base rings and much more dosing rollers and nozzles for different applications. Eausy to change and clean high mobility – the machine can be employed at various stages of production user-friendly menu controller with 64-programme memory space max. sheet pan width 600 mm 1600 mm x 1000 mm x 1600 mm
Deze machine staat in opslag bij Plastima Used Machinery Blo Udevcqccs Dvycop
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM 1,4 D semi-automatic cutting machine single blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,6 A
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM V 0,1 D semi-automatic cutting machine double blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,8 A
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Weight range per piece: 0,4-1,2 kg Capacity: 10-30 pcs/min Condition New Made in Russia Description Rye dough divider Large hopper for 300 L With 3000 mm conveyor and tin sensor
Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm
Complete extrusielijn. Op aanvraag kunnen ook losse componenten worden aangeboden. De lijn is gebruikt voor het maken van buizen van PP gevuld met krijt en bariumsulfaat. Onderdelen: - 4 Componenten Colortronic dosering (nieuwe sturing in 2017) Ble Udsu Rda Is Dvycop - Berstorff KMC 85/2 (schroeven in 2019 vernieuwd) - Sidefeeder - Complete sturing van de doseringen en extruder - Single olie- temperering - Maag smeltpomp - Krausmaffei Extrusiekop 40 tot 160 mm (met diverse sets) - Vacuumtank Battenfeld V250VA - Spray-bad K250 VA Battenfeld - Trekwerk C250 - 4 Sica - Zaag CCM 32/170-2 Rollepaal - Kieptafel Battenfeld
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Screw Diameter: 50 mm // Throughput: 150 kg/h
Maximum Diameter: 800 mm // Minimum Diameter: 280 mm
Extrusion line for drip irrigation
Accumulation Head Capacity : 4 l // Number Of Heads: 1
Material : PS, PP, PE, PVC, A-PET // Forming Area (Vxh): 535 x 390 mm
Output (Packs Per M?Inute): 45 U/min // Type : Barrel
Output: 12000 U/h // Bottle Size: 0,5 l, 1l
Merk: Werner Koch Technik GmbH Model: CKT 110 Bouwjaar: 1999 Bo Ud Dju Aqg Sjvycjww Hoeveelheid droge lucht: 110 m³ /h Volume bak: 400 L
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
KEK Centrifugal sifter ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh,
An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.
x-travel: 600 mm y-travel: 400 mm z-travel: 510 mm table-size: 800 x 400 mm Control: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/min feed speeds - directly programable: 30.000 mm/min tool taper: ISO40 tool magazin:: 20 total power requirement: 25 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 m Control unit operating time: 32,790 hours. Spindle operating time: 10,310 hours. Includes Heidenhain electric handwheel. Includes electric touch probe. Includes internal coolant supply. Includes chip conveyor. Includes Gressel Gripos machine vise. Includes USB port. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 555 mm turning length: 3000 mm control: Monforts Control System type: MTC-K CCUO turning diameter over slide rest: 290 mm cross movement: . mm spindle passage: . mm turning speeds: 1600 U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw chuck: Rotha-S Plus 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...
Reference ID PP-53792 Category 5-Colors Manufacturer Komori Model LS 540+LX Year Built 2007 Color 5 Impression 50 Working Hours - Speed 16000 sheets/h Max. size 72x103 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors and varnish PQC-S KMS4 KHS X-Rite IntelliTrax, all 3 automatic washers, Preset CX equipment up to 1 mm thickness, double size of impression cylinders, full APC Ink Units Tempera-Ture Control Komorimatic Tresu anilox coater Grafix Megatronic poeder spray Technotrans Alpha D 60 L-5 chiller Baldwin IR/hot air CIP 3/4 impressions: 50 millions
Key data: 4 kN, 70 mm
Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...
Broaching machine Karl Klink Technical data can be found in the photo
An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.
table length: 175 mm table width: 110 mm grinding wheel diameter: 500 mm total power requirement: 1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mm gear width: mm max. module: Control: total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 700 mm roll length: 1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-roll L-calender 700x1800 - used - BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1 - Reverse L-shaped roller arrangement - The system was used for the production of PVC films - Film thickness: 0.05 - 1 mm - Can also be used for rubber - Maximum product width: 1,600 mm - Working speed: 6 - 60 m/min - System features roll bending and cross axis - BUZULUK temperature control and stretching device behind the calender - Year of manufacture: 1996 - Consists of 13 stretching and pulling rollers behind the last roller of the calender - The device is supplemented by 4 polishing rolls, - these 4 polishing rolls are temperature-controlled, - all rolls are driven via cardan joints, - all rolls can be temperature-controlled and ...
maximum number of results exceeded
please refine your search
