k und f used for sale

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Manufacturer: Kurz Prägestation<CRLF>doppelseitig, Type: KTF 70 B, Year: ca.2003, FREETEXT1: Transferbreite 60 mm, FREETEXT2: Vorschub max.60, FREETEXT3: Temperatur 0-300 °C, FREETEXT4: Schwenkbereich+60/-10, FREETEXT5: Druckluft 6 bar, FREETEXT6: Gewicht 400 kg, Year :ca.2003

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012

Manufacturer: Kopperschmidt, Type: Merkur DC 15-50, Year: 1984, Compressed air bar max: 120, Übersetzungsverhältniss: 15:1, Förderleistung l/min: 27, Druckluft max bar: 8, Year :1984

Manufacturer: Kopperschmidt, Type: DC 15.50, Year: 1984, Transmission ratio: 15:1, Compressed air bar max: 120, Förderleistung l/min: 27, Druckluft max bar: 8, FREE TEXT: geprüft auf Funktion, Year :1984

Manufacturer: Kremlin, Type: 16-120 F, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 6, FREE TEXT: geprüft,

Manufacturer: SEW, Type: Kit Mowimot, Modell: MM30C-503-00/Stern,

Manufacturer: Homag, Type: CPU Karte, Year: 1996, Year :1996

Manufacturer: Kuhnke Steuerung, Type: KUAX 653,

Manufacturer: Kuhnke, Type: KUAX 653, war verbaut inMaschine: Heesemann KSA, Standort: Lahde,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Klöckner, Type: Power Supply, Modell: EM4-111-DR1, Seriennummer: 02-5376,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

Manufacturer: Klöckner, Type: EM4-111-DR1, Seriennummer: 02-3160<CRLF>,

Manufacturer: Homburg, Type: Korpusspresse, Year: ca.1980, Work piece width min-max mm: 250-600, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 400-1500, Hydraulical/pneumatical: Pneumatisch, Cylinder vertical: 4, Cylinder horizontally: 2, Machine rigging: hand, Year :ca.1980

Manufacturer: Hackemack, Type: KTR, Year: 1992, Driven: yes, Length mm: 1000, Working widht mm: 1350, Total hight mm: 850 - 950, Rollenteilung mm: 140, Rollendurchmesser: 65, Conveyor speed m/min: 6 - 30, Drive power kW: 0,37, Year :1992

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982

Labelling machine Krones type: Universella 10 - 5 -4 to label body, neck and back labels bottle formats: 0,2 ltr., 0,7 ltr., 1,0 ltr.

x-travel: 7.000 mm y-travel: 2.000 mm z-travel: 1.250 mm Control: Heidenhain iTNC 530 Internal cooling system: 15 bar milling head: Automatisch 0,001 spindle turning speed range: 4.500 U/min spindle drive: 37 kW taper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -CTS 15 bars -Controlled milling head (pos. Accuracy 0,001) -60 tools -37 kw spindle motor -rapid 20/10 m min -4500 rpm -iso50 -Renishaw RPM60 -chip conveyor -extra milling head (spare) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread line Kemper Imperator + bucket elevator + round and long moulder - Bread plant from Kemper - with Kemper Imperator dough divider - with Kemper bucket elevator - with Kemper round and long mould SU-S

Klingelnberg ZW 301 Gear Measuring Machine Weight 750 kg

Kapp Model AST 203 Hob sharpening machine

Bread plant Kemper BM51 Imperator intermediate bread proofer Bread plant Kemper consisting of: -1 Kemper Imperator II-MB Dough Divider Weigher -1 W&P CCR59 Conical Rounder -1 intermediate bread proofer 8-row -1 Kemper Long Moulder

Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

Karpowicz injector -Type: NK-27 -Power: 7.5 kW -Capacity: up to 1500 kg/h -Power supply: 400V 50Hz 3N -Belt width: 400 mm -Needle diameter: 2 mm -Number of needles: 27 -Dimensions: 1800 x 880 x 2100 mm -Weight: 300 kg -Made of acid-resistant steel -Quantity in stock: 1 -Condition: used/overhauled

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

KAWASAKI RA006L robotic welding station is used for precision welding of workpieces using the MIG/MAG method. The station, equipped with two independent welding tables, is protected from the inside with SICK safety curtains and from the outside with double doors with safety locks. Next to each door is a control panel, with a safety switch and other necessary buttons. The welding station is complete and consists of the following parts: – robot arm: KAWASAKI RA06L – controller: KAWASAKI E controller E40 – MIG/MAG welder: KEMPPI KempArc SYN 300 – wire feeder: KEMPPI KempArc DT400 – manual welding table 2×1 m (2 pcs.) – safety curtains: SICK – cooling device: KEMPPI KempCool 10 – cleaning station: ABICOR BINZEL BRS-CC – KEMPPI and ABRICOR BINZEL welding accessories – anti-blinding shields – inductive sensors: SICK – door bolts and stops: SICK – cont ...

Knut Schneideer Sewing and Special Machine Construction Screening plant Serial number 001 Immediate availability Location Germany City of Erfurt (on the Haarberg) Number of screens: 3

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

Manufacturer: Kohnle Model: Hardening System Year of Manufacture: 1995 Voltage: 400/230 V Frequency: 50 Hz Current: 220 A Power: 100 kW Find more here - / Contact us at -

It is a used bowl for Kemper spiral mixer Pro 150 A for sale. Price on request.

feed pressure: . bar liter capacity: . l/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Domestic water pump 60-300L The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm