k und f used for sale

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: KEB, Type: Combivert, Model: 12.56.201, Current (A): 9 Ampere/4 Kw,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Serial number: 95120264/135514, Hz: 50/60Hz, Power Output: 1,8 KVA,

Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Cefla , Type: Schaltschrank Komplett, Year: 2000, war verbaut in Maschine: Cefla ROC, Länge x Breite x Höhe mm: 1000 X 1500 X 2000, without contents: Koplett mit allen Umrichtern und VT 520 G, FREE TEXT: 4 Stück Umrichter Commander SE/Control PC PCMCIA/, Year :2000

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980

Manufacturer: Schaltschrank Ersatz, Type: Inkl. aller Komponenten im Schrank,

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Manufacturer: Beschlagwagen Kommisonierung, FREETEXT1: 3 Etagen , FREETEXT2: Breite 400 mm, FREETEXT3: Höhe ca.2200, FREETEXT4: Rollbar,

Manufacturer: KEB Umrichter, Model: F4, Serial number: 97410930/0316782, Systemconfiguration: weeke Frässpindel, Year: 1997, war verbaut in Maschine: Weeke BP 155, Frequency converter: yes, Power Output: 11 Kw, Sale without warranty: yes, Year :1997

Manufacturer: Kragarmregal, Year: 1998, Regalart: Doppelseitig, Height mm: 4200, Anzahl Ständer: 36, Lagerebenen: 3 pro Seite, 1stupright frame pieces Qty.: 36, 1.Transverse beam Qty.: 216, 1.Transverse beam length mm: 1800, Stacking places: 4 pro Seite, FREE TEXT: Preis für 3 Ständer inkl. 18 Querriegel 2000 Euro, Year :1998

Manufacturer: Nottmeyer, Type: Kommet Super SB, Year: 1988, Work bays: 1, Throuh running machine: yes, Working range X: 2600, Working range Y-axis: 800, Drilling support horizontal: 2, Drilling supprt from bottom: 5, Drill support from top: no, Belt conveyor: yes, Grid 32 mm: yes, Horizontal drilling from both sides: yes, FREE TEXT: ink. Bohrgetriebe , Year :1988

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Kaltenbach, Type: TL 350, Control: hand, Saw blade diameter mm: 350, kW output per motor: ca.2, Saw blade tiltable vertikal up to °: 45-90-45, Length control by: no,

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Manufacturer: IMA, Type: Kantenpoliergerät, FREETEXT1: Kantenpoliergerät, FREETEXT2: Oszielierend, FREETEXT3: Kw Leistung 0,37, FREETEXT4: Drehzahl 2800, FREETEXT5: Durchmesser Bürste ca. 200 mm, FREETEXT6: Höhenverstellbar, FREETEXT7: Einsteuerung möglich, FREETEXT8: schwenkbar/Höhenverstellbar,

Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: KOCH, Type: DL 60, Year: ca.1992, Control: umgerüstet auf elektronische Leimventile, Work bays: 1, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 40, Min.-max. workpiece height in mm: 2800, Work piece depth mm: 800, Work piece width min-max mm: 60, Feeding speed m/min: ca.40, Centre support: no, Beleimwerkzeuge: 6, Dovel insertion: yes, Dovel diameter mm: 8, Work piece clamping: pneumatisch, Low-pressure gluing system: 2, Year :ca.1992

Manufacturer: Krautzberger, Type: 30-10, Year: 2000, Kolbenpumpen gesamt: 1, Volumenstrom l/min: 2, Volumenstrom l/min: 2, Luftverbrauch bei 6 bar: 8, FREE TEXT: fahrbar/mit Becherhalterrung, Year :2000

Manufacturer: Homag , Type: 4 Motoriges Kopieren, Year: ca.1993, FREETEXT1: komplett mit Ständer Flanschplatten<CRLF>, FREETEXT2: inkl Tasteinrichtung, FREETEXT3: 4 Motore /165 Volt/300 HZ 18000 Umin, Year :ca.1993

Manufacturer: Bauerrischter, Type: KSK 92, Year: ca.1997, Control: hand, Monting of the machine: 1 Schleiband, Control: hand, Sanding belt hight: 60, Table length: ca.2000, Slewable sanding head: yes, Table stop mm: yes, Sanding area (beam): 60, Sanding belt width max mm: 2000 X 60, Sanding belt length max mm: 2000, Work piece hight min-max mm: 50, Feeding speed min-max m/min: 5-15, 1 Schleifmotor kW: ca.1,5, Sanding unit slewable up to 45°: 90-45, Suited for lacquer sanding: yes, Year :ca.1997

Manufacturer: Kuper, Type: QFS 850, Year: ca 1980, Cutting lenght mm: 850, Year :ca 1980

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Ocamc, Type: Kopp Elta, Year: 1990, Min.-max. pressing length in mm: 2500, Min.-max. pressing height in mm: 1200, Min.-max. pressing depth in mm: 600, Compressed air bar: 6, Year :1990

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Manufacturer: Koch Säge Bohr und Dübelanlage, Type: SBD-30-A, Year: 1991, Control: Koch, Work piece width min-max mm: 30 - 130, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 20 - 40, Saw diameter mm: 300, Drilling gearbox number horizontal: 2, Re-charging: yes, Dovel insertion: yes 10-12 mm, Workpiece magazine: yes, Work piece refeeding: yes, Glue monitoring: yes, Drill spindle pitch mm: 17/22/30/35, Year :1991

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Manufacturer: Kurz Prägestation<CRLF>doppelseitig, Type: KTF 70 B, Year: ca.2003, FREETEXT1: Transferbreite 60 mm, FREETEXT2: Vorschub max.60, FREETEXT3: Temperatur 0-300 °C, FREETEXT4: Schwenkbereich+60/-10, FREETEXT5: Druckluft 6 bar, FREETEXT6: Gewicht 400 kg, Year :ca.2003

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012