k und c used for sale

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

Corner cutting Krause

We are offering for sale a used Krones carbonated bottling line. The line includes the following equipment: (there is no pouring machine it’s sold already) Bottle unloader – Kettner 1989 (Kontipack E), for returnable bottles Bottle washer – Krones 1988 Typ 150/10-110, for returnable bottles Capping machine – Krones Bottle capping machine – ADELSKI PP2010, 2007 Manual plug closer Champagne basket insertion machine – Nortan, Minerva 80-120, 1995 Decorative casing machine – Nortan, Prisma 1980s, 1994 Labeling and banding machine – Krones Taxomatic, KES-5, 1995 Labeling machine with self-adhesive labels – Krones Prontomatic, 1994 Bottle dehumidifier – Krones K745-D07, 2005 Palletizer – Packman (60ASS30), 2002 Pallet wrapping machine – Pablo, PL OW-2-OC, 2017 Pasteurizer Mixer – Krones 1989 Bottle loader into crates (12 bottles per crate) Transporters ...

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

Collet holder long design for tool grinding machines, production and grinding. Recording: SK 50 Werkstückspindelseitig. B-32 or BCR collets for technical details and dimensions, please please contact us.

Immediately available New cabins KPO-2 and KPO-2o 900 x 1800 x 880 Price from 4,900 + freight

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

maximum board thickness. 800 gsm Corrugated board types: N, E, F Speed 400 m / min. Max. Inching 10 m / min. maximum thickness of the folded box 20 mm maximum inlet width 1100 mm Dimensions 15 x 1.70 x 1.90 m Weight 7.6 T required power 15 kW required compressed air 6 bar Compressed air capacity 60 L

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW

Flow-wrapping machine KLAT 14-IF – gentle packaging for sensitive products The KLAT 14-IF has been specially developed for packaging products that are sensitive to breakage. The adjustable inclination of the machine body of up to 45° ensures that the product falls into the bags particularly gently – ideal for sensitive goods such as biscuits, waffles or snacks. The machine is versatile and suitable for the production of: Stabilo bags Pillow Bags Stand-up bags Specifications: Maximum film width: 600 mm Maximum bag length: 310 mm The KLAT 14-IF combines high flexibility, product-friendly processing and precise sealing technology – an ideal solution for producers who rely on both product protection and attractive packaging formats. We will be happy to advise you on whether the machine is suitable for your products and offer you a tailor-made solution.

General SKU340S632 LocationBarneveld MakeKEK Kemutec Powder Technology (UK) TypeK220 No.07025.220CM.8451 Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesdia. 200x90mm Sieve sizesdia. 210x120mm Sieve perforationdia. 5mm Inletdia. 145mm Outletdia. 145mm Motor4 kW 400 Volt Information Year of construction1997 With switchgear(as is) Floor space1,1x0,8 M Total height1,3 M Weight350 KgSieve granulatorsKek KemutecSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: Art.No.: 39441 1 set = 4 pieces -Quantity: 6 sets available -Price: Per set -Dimensions Bos: 135/70/H55 mm -Weight: 1.2 kg

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Centrax ROLLS ROYCE 5 MW CX 501 KB7 Gas Turbine-Generator Package YEAR 2011 HOURS 40 000 Equipment List: Turbine/Alternator Housing and its complete contents including: • 1 Allison 501 KB7S DLE Gas Turbine - • 1 Alternator • 1 Epicyclic Gearbox • 1 Acoustic Enclosure • 1 Alternator Control Cabinet and Software • 1 Turbine Control Cabinet and Software • 1 Auxiliary Distribution Cabinet and Software • 1 Lubrication Unit including Oil Cooler • 1 Fuel Supply Circuit in Acoustic Enclosure • 1 Electro-Hydraulic Starting System- • 1 Compressor Cleaning System • 1 DC Power Supply • Battery Charger • Fire Protection and Gas Detection Circuit • Fan acoustic enclosure • Air cooler fan List of components: • Control/command panel and room and its complete contents • Filtration assembly and combustion air ducts • Filtration assembly, silencers and box ventilat ...

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

Cleveland KGL40 kettle stainless, 40gallon, jacketed cooking kettle, adjustable temperature controls, steam jacketed, 1Ph

Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...

X16374-150 Office Container with Equipment Description: Manufacturer: Kunert Mobilheime Model: Office Expo Camping Cabin Dimensions 599 x 394 cm Standard Equipment: Facade: KUU Entrance Door 1525 x 2020 mm PLB-UNS Set of PVC Windows with Double Glazing in Anthracite 1JR Safety Glass in High Windows C4T 400V Power Connection with Plug OEY Exterior Lighting - 6 Points 24E Kerrafront Trend Facade VIN Vinylit Shadow Facade YXD EPDM Roof Interior Fittings: UD5 Curtain Rods and Drapes 9J2 PVC Flooring 8EY Glued Flooring PAA Complete Electrical Installation MF7 Computer Socket Z63 LED Ceiling Lighting G2Y Interior Door 700, White, Steel Frames OFU Pre-Electric Heating Office: MYW Table 1140 x 690 mm YBW TV Socket with Power Outlet 9DO Wall-Hung Shelf D8S Catalogue Rack W1Y Kitchen Set SG3 Built-in Under-Counter Refrigerator 81N Pendant Lamp X75 Sli ...

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: 12.56.200-A349 92280163/053049 -Power: 5.5 kVA -Dimension: 355/245/H220 mm -Weight: 6.7 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: F4 -Item no.: 05.F4.SOC-1220/ -Power: 1.6kVA -Number: 3x frequency converter available -Price per piece -Dimension: 225/90/H115 mm -Weight: 1.4 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 -Item No.: 10.F5.AD-3AHA -Power: 4.0 kVA -Dimensions: 320/90/H220 mm -Weight: 3.7 kg

Berief KIPPKO 1200L, For Sale: Berief KIPPKO 1200L Industrial Cooking Kettle, We are offering a Berief KIPPKO 1200L tilting cooking kettle for sale. The machine has been removed from production while fully operational and remains in clean, well-maintained, and good working condition., This industrial kettle is designed for large-scale food processing and is ideal for producing soups, sauces, ready meals, vegetables, meat products, and other liquid or semi-liquid foods., Technical Specifications:, - Manufacturer: Berief, - Model: KIPPKO 1200L, - Capacity: 1,200 liters (gross volume), - Material: Stainless steel (food-grade), - Heating system: Double jacket, indirect steam heating, - Steam pressure (jacket): approx. 3 bar, - Maximum temperature: approx. 140°C, - Tilting system: Hydraulic tilting kettle, - Mixing system: Horizontal multi-arm agitator with wall scrapers, - Control: PLC syst ...

Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

Listing ID: 22718 Brand: CUMMINS Model:KTA19 M Power: 392 kW (525 HP) 1800 rpm Dry Weight :+/- 2200 kg Dimensions: 215 96 171 cm

As good as new head machine KÖNIG, type: Classic Rex T4 - 4 rows but currently only 3 bands added (row 4 blocked) - everything redone - No control integrated - head machine only works in conjunction with a cooking cabinet (system)

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Seydelmann vacuum and cooking 750 litre bowl cutter. Has come direct from closed pate factory. Bought new in 2008, 2 identical machines available. We will have video of these running shortly.

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request

Make: Küba Type: CAV N10-1X1B Pipe capacity: 0.1 litres Price on request

Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump

The inlet table is available. The machine is partially modernized with Siemens. The refrigeration unit is from 1998 The tape is available Bandwidth: 1050mm