k tron used for sale

with 3-jaw lining Röhm - 200 mm - 15 pitch

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

We offer all types of Wafios wire pin presses from S25 - N90

Coal-fired power stations new and used For more information and pictures we are available. All prices are free destination world. Following and all resulting costs are due to customer. VAT is not included in the prices. Contract agreements for every single offered item must be agreed on separately and are binding only after signing of contract. Errors excepted. No guarantee for personal and material damages, caused by the buyer due to dismantling. Court of Competent Jurisdiction shall be Germany. All agreements are according to German law. A customer protection agreement (non-circumvention and non-disclosure) was settled according to ICC Paris, France. The seller will be the owner of all goods an material until payment was settled completely. All technical details, measurement specifications etc. are estimated specifications and not binding for the offerer. Subject  ...

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

DAIKIN Cold water unit Air-cooled, 180KW,Y.O.M., cold mite 134a. Compressor one pcscrew, make Daikin. Price € 8,000,-

used lime silo material: Metal

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de

Kuka KR210-2 Series2000 Built in 2002 Payload 210kg Weight 1245kg Range 2700mm Connection line 7m Control KRC2 Built in 2002 Weight 185kg Software 4.1.5 SP08 ..

1 Piece of cantilever / heavy load shelving system PK (double-sided) top state (from hot rolled steel profiles) ABM.ca.: L. 2,600 mm (2 fields with 1,250 mm axis) T. 2 x 750 mm useful depth (+ 200 mm support) H 2.250 mm > per stand 4 piece arms one above the other > Adjustable grid 100:100 mm, screw > 5 Storage level incl. foot stabilizer > Load / arm / storage level = 450 / 1,350 kg > Rack load = provided 1,800 kg each always evenly distributed load > Rack section, IPE 200 / arms IPE 80 (incl. deflector, Rolling backup optional plugin) > Color: RAL 5010 (gentian blue), connector + diagonal cross galvanized As offer single-sided shelf 1.795,-price + VAT factory Gärtringen / plus freight

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours

Well-preserved commission rack. Images can be sent. With a friendly greeting Tande & Translations

Working width 1350 mm

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies

Price per 2700 mm; continuous shelf BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is ...

Complete boiler system Kohlbach Year of construction - 1990 Power - 4000 kW For very wet chips incl. bark Water content - about 15000 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulically ash removal Cyclone for dust separation Electrostatic precipitator Complete controling system Well maintained, excellent condition

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Industrial robots Kuka KR150 Series2000, And KR150L130, KR150L110, KR210 Built 2001/2002 Range 2700mm, 2900mm, 3100mm, 2700mm Payload 150kg, 130kg, 110kg, 210kg Weight 1245kg Connection line 7m or 15m Control KR C2 Weight 185kg Software stand V4.1.5 Hand programming kCP2 ..

technical data: Track gauge: 980 mm Support height: 420 mm reinforced execution circulating chain Drive by worm gear motor with built-in slip clutch Kippstool adjustable stem holder Cable and cable balancing

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

technical data: Make: Möhringer Type: KW 2h Types No:: 126 450 Track gauge: 980 mm Support height: 430 mm electr. Page verst.: yes Feeding: yes Wooden feeder: from the left Drive: 0.37 kW Wheel diameter: 200 mm

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm

technical data: Make: Linck Track gauge: 850 mm Support height: approx. 470 mm

technical data: Type: KW 1 vek Types No.: 126 200 Track gauge: 800 mm Support height: 410 mm Wheel diameter: 180 mm With electric side adjustment

Power: 200 kVA / 160 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AvK / DKB 55/200-4/420703 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

technical data: Pieces: approx. 50 Purpose: for MN 180 Diameter: 570 mm Sheet thickness: 3.6 mm Cutting joint: 5.2 mm Number of teeth: 16 Lateral supernatry HM cutting: 0.7 - 0.8 mm

Robot Kuka KR240 Series 2000 Built 2005 ed05 Range 2700mm Weight 1245kg Payload 240kg Control KRC2 ed05 Weight 185kg Software stand V5.2.9 Windows XP Engine hours 17300 Kuka KCP2 Interconnectors: 7m .

Compressor KAESER 10 bar power 90 KW

40 bar booster KAESER 300 / 400 m3/h

Curved tape

used, kpl. 1 year warranty, plate size 630 x 630 mm, 60 plates, open or closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 576 liters, filter area 40m2, dimensions 4800 x 1200 x 1200 mm, weight 2.5 tons, motor hydraulics, drip plate, filtrate channel, with or without Filter cloths

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

15.00 l / h

Used Cummins engine KTA50M2 Building year 1998

; ready for operation

Front forklift OK Type DFG KLF construction year 1969 pay load 2,500 kg axle load in front 6,230 kg - behind 2,510 kg unloaded weight 5,120 kg zulaess. Total weight 7,620 kg with questions we stand to you with pleasure at the possession.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

; NEW

; NEW

Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations