k tron used for sale

Used Roll Splitting Machine Manufacturer: KLANKE Type: RGS-50A Year of manufacture: 03/2013 specifications: Roll width: max. approx. 3,000 mm Roll diameter: max. approx. 2,100 mm Cutting force: approx. 60 t (2 x 30 t) Operating pressure: max.: 200 bar Drive power: 7.5 kW Machine weight: approx. 15,500 kg Oil tank volume: approx. 140 Ltr. including frequency converters including: - Steel plate belt as feed belt Type: TLK 3000 Conveyor width: 3,000 mm Length: 5,520 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm - Steel plate tape as take-off belt Type TLK 3000 Conveyor width: 3,000 mm Length: approx. 3,500 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm including frequency converters  ...

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

used weigher Kemper Consul-ET, in bakery condition, checked and tested, works perfectly, No. 680454, 16 A, 400 V, 50 Hz

Manufacturer: Doleschal Type: Smoking chamber Model: dvoja kolica Productivity: 260 kg/h Height: 3000 mm Width: 1910 mm Length: 2290 mm Voltage: 400V 50Hz 3N Power: 48 kW Main material: Stainlees Steel

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition

1m x 1m 24 floors 2m high 36 stainless steel gratings with perforated plate 480 x 995 mm

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

; Gross weight [kg]: 152

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

Automatic Transfer Switch - ATS Panel - ATI Panel, 1000 Ampere - Applicable for generators up to 675 kVA; Gross weight [kg]: 180

Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 865 kVA; Gross weight [kg]: 180

quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data ...

quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for  ...

ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...

We sell here 2 turbochargers for the M.A.N. diesel engine overhauled. Designation K31. Nominal speed 1500 rpm . Condition see pictures. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile team is active nationally and internationally. They bring the necessary tools and know-how. Draw on over 25  ...

Koenig and Bauer Alphajet Into Inkjet printer MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

Make: ebmPAPST Diameter: 710mm Speed: 1750 rpm Power: 5030W 4 pcs. available Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Infeed Belt, Integrated Pre-Stacker, Integrated Control Panel, Security Guards, Delivery Belt, Max Untrimmed Size: 12.20" x 15.74" x 3.14", Max Trimmed Size: 11.80" x 15.27" x 3.14", Min Trimmed Size: 3.90" x 4.72" x 0.78", Max Thickness: 3.15", Max. Stacking Height: 3.14", Front Cutt-Off Width: 1.57", Head And Tail Cutt Off Width: 1.96", Capacity: 6.600 Cycles/Hour

Makra Edge Deburring Machine KEG 150 further inventory and ALL prices at: inventar-verkauf.de/id/alesco An efficient and durable edge deburring machine that is suitable for both professional and DIY enthusiasts. With a power of 1050W, this device offers outstanding performance for all kinds of deburring tasks. The infinitely variable speed control allows a maximum speed of up to 25,000 rpm, which enables precise and fast deburring work. The device is used, but has a long service life due to its robust construction and excellent performance. The KEG 150 is a versatile and powerful tool that meets all your edge deburring needs.

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Flywheel size: SAE1/14, Mecc Alte ECO38-1L/4C, DER1 voltage regulator, 300kVA continuous / 330kVA stand-by power; Gross weight [kg]: 771

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

surface area: 1200 x 600 ( x 500 ) mm no. of flutes: 9 groove width: 14 / x 62,5 mm total power requirement: 0 kW weight of the machine ca.: ? t Packing: Holzkiste 1400850700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Max. saw blade diameter: 350 mm Manual material tensioner Minimum quantity spraying Digital angle display

; Gross weight [kg]: 385

; Power [PS]: 136; Gross weight [kg]: 13000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x500kW - DC socket: 3x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x500kW; Water Tank Volume [l]: 800

Pneumatic Parts Lot Make : Vers. , partly new, 10 pcs cylinder gray Martonair, used but good condition. 6 pcs. 100mm , RM8032B/M electr. Limit switch 2 pcs. 200mm, RM8032B/m electr. Limit switch 2 pcs. 250mm, detto 1 pc. pistonless cylinder 1 pcs. Festo DNC-32-260-PPV-30K2-66K8 new 1 pc Festo DSNU-25-280 PPV-A 1 pc Festo DSNU-20 – 150 PPV-A 3 pcs KNOTH , 35/25 , 50/25 , 70/50 , ( φ. / stroke ) Control block, 5 valves, 5/2 directional Electr. 24 V = Control block, 6 valves, 5/2 directional valves Electr. 24 V = Control block, 4 valves, 5/2 directional electr. 24 V= 2 Directional Control Valves , 3/2 , Festo, H-3- 1/4, Manually Operated 1 Directional Control Valve, 4/3, Festo, HS-4- 3/8, Manually Operated Control block with 3 directional valves and maintenance unit

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Control Heidenhain ... Manual Plus 4110 Turning diameter ... 500mm Turning length ... 1500mm Spindle bore... 82mm Spindle speed ... 0-3000 rpm. Machine weight ... 2500kg L x W x H ... 3092 x 1370 x 1785mm Main engine power ... 17kW Max. workpiece weight ... 1000kg Circumferential diameter via support ... 350mm The machine is in good condition, possible to test under power.

; Power [PS]: 109; Gross weight [kg]: 2500; Engine: Yunnei - DEF47CZAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC Socket: 1P, 2x16A, 1x31A: 3P, 1x63A, 1x125A - 1P Socket; Water Tank Volume [l]: 150

Hydr. Welding Rotary and Tilting Table - Four Axis - Welding Manipulator Specifications: - Max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. table height in horizontal position approx. 1070 mm - Face plate mot .rotatable + swivel or tiltable - Face plate horizontal + vertically movable, travel distance 1250 mm - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Handheld remote control for speed regulation - E. footswitch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

We offer you a Krone TX 460 D from a current disposal. Year of manufacture: 2023 Registration date: 04.09.2023 Condition: - General condition OK - PTO shaft missing, roof left crooked - Machine dirty - No papers available - Accident damage found at the rear Hours: - Asking price: 57.500,00 EUR VHB Original price: 74.500,00 EUR Equipment / accessories / other information: Low drive with drawbar Wheel 710/50 R30, 5 TL 10 L Hydr. Off; 26,5; Gel; Compressed air bottom hitch; K80 with drawbar suspension 2-roller dosing unit Hydr. Unloading aid Cargo compartment cover Suspension 40 km/h Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 37186 Moringen The sale is without warranty Subject to prior sale

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Kalmar GCE80-9 2009

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery

used head machine Kemper Quadro Round, in bakery condition, cleaned, run to the end, 5 rows, No. 660052, 25 A, 50 Hz, 400 V, sale as seen

Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...

used roll line Kemper Quadro 5-row, overhauled, with head machine (245 cm long), double sprinkling (330 cm long) and setting table (300 cm long), width of the line: 125 cm, head machine: No. 93228, item no. 650010, 16 A, 400 V, 500 Hz

Qty. 1 Second-hand can filling line Mfc.: KHS, Roteg, Bizerba, NSM, Videojet, GFKK, Beyer Maschinenbau GmbH, M.J. Maillis, Rudert Edelstahl Technik GmbH, Ullrich Gmbh Built: 2007 - 2014 Stopped: 12/2023 Can sizes: 3.1 L & 5.0 L Filling product: Pilsener & Wheat beer Filling temp.: 4°C CO2 – Volume max. Pilsener: 5.5 g/L Wheat beer: 6.5 g/L Capacity: Can size: 3.1 L 650 cans/h of pilsner 600 cans/h of wheat beer Can size: 5.0 L 700 cans/h of pilsner 600 cans/h of wheat beer Can dimensions: 3.1 L – dia. 175 x 165 mm 5.0 L – dia. 175 x 246 mm Can suppliers: ARDAGH, & HUBER Disposable NOTE: Please note that some parts of the brewery are for sale, such as vertical and horizontal tanks, heat exchangers, weighing device, separator, pipe drag conveyor, compressors, flanges, div. stainless steel pipes, control valves, boilers etc. Further information can be  ...

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...