129,495 used machines on RESALE, but how to find them? Machine Search
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW
max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg
Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg
new
Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;
cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60Hz -Output: 3 Ph : 380/460 V -Number: 1x converter available -Weight: 3.4 kg
A NEW USED Compact - FLAT - FINGER-JOINTING line Manufacturer: GÖTZINGER Year of construction 2019 Max. 140 mm x 80 mm Min. 20 mm x 30 mm Built up and immediately available Milling, gluing, pressing, capping Sale as inspected without warranty and guarantee Self-dismantling with full assistance For the production of all mouldings inside and outside, floors and much more. All built in a line, about 35 m long. Gluing one-component PU glue waterproof Technical description on request
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 6000 kg -Chain length: 16 m -Quantity: 2 available Price: per piece -Weight: 80 kg/piece
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 1500 kg -Chain length: 1 m -Weight: 12 kg
Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...
Servo drives from Indramat KDS 1.1-100-300-W1
Key data: 35 mm
New drill motor 230V - Part No. TB02752
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 1500 kg -Chain length: 1.5 m -Weight: 20 kg
NEW - TB08148-1 - Electronics 230V from spare parts warehouse.
NEW electronics 230V - TB09050-1 - from spare parts warehouse
NEW - Electronics 230V - from spare parts warehouse.
NEW - Electronics 230V from spare parts warehouse.
Key data: 500 mm, 500 mm, 90 mm
Scribing plate tap and piston Used Condition: Good
Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 2000 mm -Depth: 800 mm -Height: 890 mm -Weight: 145 kg
Mains filter for frequency converters -Type: 09.E4.T60-0001 -Quantity: 1 piece available -Price: per piece -Dimensions: 90/260/H50 mm -Weight: 1.5 kg
Disc valve, flap valve, ball valve -Drive: pneumatic -Connection: DN65 -Material: Stainless steel -Dimensions: 380/100/H130 mm -Weight: 7 kg
4 colors, Possible pressure variation = 4+0 Film width max : 1120 mm Print width max : 1040 mm Repeat : 300 - 800 mm Max. speed (mech.) : 200 m/min Unwinder diameter : 1000 mm, core 76 / 152 Rewinder diameter : 1000 mm , core 76 / 152 Dryer heating medium = GAS, Incl: 4 electric pumps Existing printing cylinders, anilox rollers and sleeves
The scope of delivery includes: 01x Shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material colour: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | Pcs. Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or contamination may be present. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
Robot Kawasaki RS05L E-Controller with Cab Control: E-Controller Number of axles: 6 Max. load capacity: 5 kg Max. working area: 902 mm Year of construction: 12/2012 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams Floppy disk drive for data backup 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.
Disc valve, flap valve, ball valve -Drive: manual -Connection: DN65 -Material: Stainless steel -Dimensions: 250/150/H200 mm -Weight: 6 kg
Tool magazine, tool holder, tool mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg
Palletizing robot KUKA KR40PA KRC2ed05 Control: KRC2ed05 Number of axles: 4 Max. load capacity: 40 kg Max. working area: 2091 mm Year of construction: 12/2009 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams Floppy disk drive for data backup 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.
Inductive sensor -10-65 VDC 200 mA -Sn: 100 mm -Quantity: 5 pieces available Price: per piece -Weight: 1 kg
Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Outputs: 2 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg
A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request
Indramat Power Supply-----Power supply Type CO 1.3-100-220
Key data: 560 mm, 1200 mm, 380 mm
Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m
Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg
Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg
Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Expansion unit: PNP -Weight: 0.2 kg
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 95 mm -Max. bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg
SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed
Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg
for milling chucks, spindle head -for: Assembling and disassembling tool combinations -in: vertical and horizontal arrangement -Recording: SK45 -Weight: 8 kg
Robot KUKA KR30L15/2 - Control KRC2 This used robot (built in 1998) from KUKA is perfect for metalworking and locksmithing. With a load capacity of 15 kg and a reach of approx. 3100 mm, it offers a high degree of flexibility and precision. The KRC2 controller allows for easy programming and operation. The robot is in very good condition and comes with a warranty. Ideal for companies that want to automate their production processes. The stated net price is exclusive of the statutory 19% VAT.
Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg
maximum number of results exceeded
please refine your search
