k tron used for sale

1 x Steam turbine generator 3817 KW KKK Siemens CFR5 G6b 5,000 KWe x 1,500 rpm 50 Hz 6,300 V for sale in operational condition Turbine Manufacturer KKK Siemens Model CFR5 G6b Steam pressure fresh [bar] 64 Dampfdr. Ed. [bar] 8.5 Generator Manufacturer INDAR Model BZK-710-S/A-4 P Generator [KW] 5.000 Turn around. [per min] 1,500 Frequency [per sec] 50 Voltage [V] 6,300 Current [A] 458 Scope of delivery: The system has been completely dismantled and is complete including the control system. Technical documentation: available Spare parts / tools: not available The plant was dismantled in working order. Last major overhaul: unknown Sales are "as is" or after prior inspection by a company engaged by us on request

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, claw coupling type GS -Shaft: Ø 28/Ø 38 mm -Price: per piece -Number: 13 piece -Dimension: Ø 65 x 88 mm -Weight: 0.6 kg/piece

Kroll heating mobile as hall heating, years of construction 194/95, see picture type plate

Cold room with two doors for blast freezer and freezer. Panel thickness 100mm Mass: Length 600 cm. Width 300 cm. Height 260 cm. Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic claw coupling type GS -Shaft: Ø 28/28 mm -Price: per piece -Number: 2 piece -Dimension: Ø 65 x 88 mm -Weight: 0.5 kg/piece

Electric motor, three-phase motor -Manufacturer: Katt, electric motor type FK 4 a -Power: 5 kW -Speed: 2920 rpm -Shaft: Ø 38 x 70 mm -Protection class: IP 54 -Construction: B14 -Dimensions: 410/290 / H210 mm -Weight: 44 kg

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180

Dial indicator, dial gauge, probe, probe, centering device, centrizer, 3D probe, probe -Measuring range: 0-3 mm -Reading: 0.01 mm -Scale: 0-50-0 -Tolerance marks: adjustable -dimensions: 95/55/H25 mm -Weight: 0.1 kg

Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW

Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369 -permitted Weight: 450kg - Bolt circle: Ø 100 mm -Price per piece - Quantity: 17 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369/1 -permitted Weight: 450kg - Bolt circle: Ø 112 mm -Price per piece - Quantity: 49 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Veneer assembly machine model FW 1100,

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG500U-6T -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Transformer, transformer, converter, three-phase autotransformer, converter, voltage transducer, current converter -Manufacturer: Ritz, voltage converter -Type: KSER 104/1 -Price: per piece -Number: 2 piece -Dimension: 75/105/H140 mm -Weight: 2.5 kg/piece

Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece

turning diameter: 555 mm turning length: 1500 mm turning diameter over slide: 290 mm 3-jaw-chuck diameter: 315 mm make: Röhn control: Monforts MTCK quick change tool holder: Multifix C steady: turning speeds: 2-2800 U/min transmission ratio: 3 face slide travel: 235 mm spindle passage: 70 mm tailstock quill taper MT: 5 total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,9x1,6x1,8 m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: M30/36/2 -Max. Speed: 3045 rpm -Power: 7.5 kW -Voltage: 170/400 V see photo nameplate -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 585/290/H340 mm -Weight: 115 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg

Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm

Kronen PGW grid cutter Stainless grid cutter, pneumatic cutting of fruits and vegetables into various cutting forms, mobile

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit for: Power chuck -with: transport trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Fully automatic storage system for containers – in excellent condition: Knapp Shuttle System OSR35 - installed 2016 Available from 2023, incl. 200 meters of conveyor technology, flow racks, Nerak lifts, picking stations Capacity: 7,000 containers 60x40x17cm, expandable up to 9,450 pieces. This OSR shuttle system from Knapp Fördertechnik could increase your performance enormously and reduce costs Performance: More than 500 picks/hour possible General information: The system has 2 aisles with a length of 23.5 meters (shelf length) for over 7,000 containers.An expansion up to 9,420 containers is possible. Additional information: Dimensions of the shuttle construction: Length: 32 m Dimensions of the shelf Length: 23.5 m Width: 7.5 m Height: 9.4 m Sizes of containers: Blue containers for picked goods: 60×40x35cm Green containers for storage: 60x40x ...

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg -Number: 2x available -Price: per piece -Weight: 23 kg

Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Pre-welding flange diameter DN 1200 pressure stage PN 6, stock goods, 2 pcs. new, primed, shipping possible worldwide, price per piece ex stock. Other dimensions can also be offered.

Replacement - control stage for old Dalex systems SF 16/25 1 time asynchronous welding time limiter S_21.91007.1

Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg