127,272 used machines on RESALE, but how to find them? Machine Search
Approved for HVO use; Gross weight [kg]: 1490; Engine: Rehlko KD39L04T-AA56; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: cooland heater and battery charger; Water Tank Volume [l]: 181
; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1200
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Incl. Coolant Heater and Battery Charger; Gross weight [kg]: 3177; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Requesting a EUR.1 Certificate is possible for this Generator set., , Warranty:, 1 year for continuous use, 2 years for standby use; Water Tank Volume [l]: 995
Floor oven electric oven Matadore Store Type: 6.8. M manual control Bottom heat and top heat can be individually controlled for 4 x sheets 600 x 800 mm or 8 x sheets 600 x 400 mm Stove height 17 cm all herds with steam Shelf at the bottom Base frame mobile with locking device Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH Used oven Visit our large Bakery Machinery Center!
TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...
We offer LTG-TowerMax L 20.0-250-1250-825-7200 vertical storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 7200 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical ma ...
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
Polygraph kama folding glue machine with 3 points format 104
; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87
; Gross weight [kg]: 1102; Engine: Cummins 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information
; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
Load per column: 0 Load per cantilever: 0 Cantilever lenght: 250-800 mm Rack height: 2250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electrode welding machine Manufacturer Kemppi Type TYLARC653 Power 650 amps at 35% ED, 545 amps at 60% ED 465 amps at 100% ED Power connection 400 Volt Weight approx. 300kg Machine ready for demonstration under power. Shipping on Euro pallet possible.
- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP
Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)
For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time
Vacuum cutter Kramer+Grebe VSM 200 Manufacturer Germany Year of production Overhauled Technical data overall dimensions 2800x2300x1700 mm; bowl 200 ltr; 3 knives speeds 1000/1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; hydraulic loader; hydraulic unloader; 6 knives; power supply 400 V, 50 Hz; power: main motor 26/48/85 kW, bowl motor 2,6/5,1 kW, mixing motor 3,2/4,1 kW; unloader motor 1,1 kW, hydraulic system 2,2 kW, vacuum pump Busch 250 m3, 5,5 kW.
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg
Available in stock 1 x Used BorgWarner Turbocharger type K31 for MAN Genset. The turbo was installed on a MAN E2876 LE 302 gas genset. Last turbo servicing was on July 2019. The equipment is in perfect working conditions.
various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available
Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 07.FO.R01-1228 -Input: 200 ... 240 V 50/60 Hz -Price: per piece -Number: 4 piece -Dimensions: 340/190/H85 mm -Weight: 3.3 kg
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...
Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC
The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.
4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg
Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.
Product number: 2462B Type: KB428 Serial number: C722 Block size: max 530 x 530 mm Power: 3 x 380V, 50Hz, 22kW Dimensions:950 x 1450 x 1900 mm 1 speed on cutting drum Product bottom exit in 200 litre tote bins
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg
Wire electrode, welding wire, welding wire, flux-cored wire -Manufacturer: Krupp, shielding gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 Ø 0.8 mm -Dimensions: Ø 300/100 mm -Total weight: 15.4 kg
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg
Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut
Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece
Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1
4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg
maximum number of results exceeded
please refine your search
