k tron used for sale

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Description: Bucket chain excavator Type: Floating Type: KS 250 Year of Make: 2007 Bucket capacity: 250 lit. Conveying capacity: approx. 800 t/h (depending on the material) Bucket Shakes Adjustable: 8 to 34/min Bucket ladder length: approx. 37.0 m Dredging depth: approx. 16.0 m under water Bucket chain drive: 2 x 90 kW Bar grate gap width: 200 mm (pre-screening) Number of crosswinds: 4 pcs. Number of advance winches: 1 pc. Drive power bucket ladder winch: 37 kW Ladder lifting speed: 2.20 m/min Drive Type: Electric Operating voltage: 3/400/230V/NPE, 50 Hz Control voltage: 230 VAC, 24 VDC Power supply: Medium voltage 10 kV to rated voltage 400V Cast resin transformer Rated power: 630 kVA Total installed power (drives): approx. 291 kW Control: SIEMENS type SIMATIC S7- 300 Excavator discharge belt: AA = 11.0 ...

; Gross weight [kg]: 1237; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219

Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing

Size: max 500 x 330 mm min 140 x 150 mm Product thickness: 4-96 pages Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...

Cooler CUBA Type: SGBE 56-F82 Cooling capacity: 32.8 kW at DT8, 26.2 at DT 7 Surface: 193 m2 Air flow: 14 600 m3/h Fin spinning: 7 mm Electrical heating Fans: 2 x 560 mm Dimensions: 2700 mm x 900 mm x 1000 mm Refrigerant: Freon Volume: 44.7 l Pieces in stock: 3 Reference number: CH221 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...

Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

PQC-U control console with touchscreen, KOMORI KHS-AI system for makeready optimization, automatic wash-up/ink preset, SmartFeedback for density adjustments (with PDC-Lite II), AMR (Automatic Make Ready) for preset job changes, Production quick-start function, Remote register and transfer cylinder adjustment, Automatic setting of sheet format, suction head, side lays, delivery, and stock thickness, S-APC: semi-automatic plate change (no plate bending required), Antistatic blower at feeder head, Side blowers (feeder), 2-zone suction tape feed table, Pneumatic stop fingers, Mechanical & ultrasonic double-sheet detection, Max. sheet size: 640 × 940 mm, Min. sheet size: 297 × 420 mm, Max. print size: 620 × 930 mm, Plate size: 700 × 945 mm (thickness: 0.30 mm), Blanket size: 800 × 955 mm (barred), Substrate thickness: 0.04 – 0.6 mm, Gripper margin: 10 mm, Plate clamp margin: 45 mm, Max ...

Kemper Long Knitter Type: Princes Year of construction 2007 Stainless steel version for long work of the breads with 2 attachments Band width: 32cm comfortable with bread systems on rolls Height: 155cm Width: 200cm Depth: 60cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Year of construction 2023 With this motor-driven cutting machine, goods such as cables, pipes, hoses, steel cables, plastic profiles, etc. can be measured for length and cut off. The powerful feed makes it possible to pull directly from an unwinding system without a motor, such as a drum rack or drum unwinder. In conjunction with a pot wrapper, the cut-to-length goods are wrapped in rings. • Cutting machine for cables, wires, hoses and much more. Technical data AUTOCUT 40 Winding material Ø (deviating from conformity assessment) 1 - 30 mm Inlet height approx. 1000 mm Direction of passage from right to left L x W x H approx. 1160 x 950 x 1550 mm Height with open protective cover approx. 2050 mm Length with pot winder approx. 1800 mm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kubota V 1902, 4-cyl. Diesel engine, water-cooled, 1861 cc displacement, used machine, from 200 operating hours, several available. Other diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new. Gasoline engines: 1-2 cylinders of 3-15 kw from B&S, Honda, Kohler, Robin, Wisconsin. Various radiators, starters, alternators and silencers in stock, various hydraulic pumps and hydraulic motors. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

fully automatic cake cutting machine Krumbein Type: KSSM 3.0 D for cutting 60x40cm and 60x20cm sheets long and cross-section 60 x 40 cm sheets digital control Siemens Piece size individually adjustable removable knives easy cleaning incl. accessories

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Complete non-returnable glass bottling line for hot fill and cold fill Krones / KHS Capacity: up to 33.000 bph by 500 ml glass bottles (the capacity depends on the product, the product temperature and CO2 content) Products: juices like orange juice, apple juice, tomato juice, etc. but also cold fill products like CSD with CO2 Bottle sizes: 250 ml - 1000 ml Capping type: 28 mm aluminium 33 mm aluminium twist-off cap 43 mm aluminium twist-off cap (the twist-off capping machine is included in the scope of supply) Labelling: paper labels with cold glue on the bottle Packaging: wrap around packaging (full carton) or tray packaging but without foil shrinking station Depalletizing and palletizing: full automatically Year of manufacturing: 1999 - 2007 This line was in production until end of 2025 in a German fruit juice and CSD company. It is stil ...

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

TECHNICAL SPECIFICATIONS Manufacturer: KAUTZ Description: Elliptical shaker screen for light material separation Type: Wet screening Type: OSK 2071/2-W Number of screen decks: 2 Year of Make: 2005 Feed capacity: approx. 150 t/h Dimensions screen deck (length/width): 7,100 x 2,000 mm Screening area: 2 x 14.2 sqm Number of steps: 2 Screen covering deck 1: Synthetic Screen Covering Deck 2: Synthetic Strainer pan: available Chute car: available SPECIFIC COMMENT - Stepped screen deck with shower for separating light materials (wood, coal) - Many adjustment options due to water supply - Optimal machine for simultaneous screening and cleaning of the feed material - Only machine included in the scope of offer

Krumbein KSSM 1,4 D semi-automatic cutting machine; single blade cutting system; cutting takes place on two levels – the first level is cut transversely, the second – longitudinally; raising the tray from level to level is done manually; the distance between the knives can be adjusted; the knives are easy to remove; tray max. dimensions: length 800 mm, width 600 mm; product max. height 55 mm; power 400 V/3 Ph/ 50Hz, 1,6 A

Size: 1020 x 1050 mm

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

CAKE CUTTING MACHINE KRUMBEIN KSSM V 0.1 D semi-automatic cutting machine; double blade cutting system; cutting takes place on two levels – the first level is cut transversely, the second – longitudinally; raising the tray from level to level is done manually; the distance between the knives can be adjusted; the knives are easy to remove; tray max. dimensions: length 800 mm, width 600 mm; product max. height 55 mm; power 400 V/3 Ph/ 50Hz, 1,8 A

KOLZER DGK 36SV vacuum metallizer was built in 2016 in Italy by Kolzer s.r.l. The machine on offer enables various types of components, i.e. plastics, glass, cups and automotive parts, to be coated with decorative or functional coatings. These coatings give the workpieces a characteristic metallic, mirror or gold effect. The machining process is performed in a deep vacuum. Inside a large chamber, there is a tungsten spiral into which small rods or wires of conductive metals are inserted. A high-power current is passed through the spiral, causing it to heat up to 1500°C. This temperature causes the material to melt and generate vapour. The vapour then spreads out as a cloud of atoms and is evenly deposited on cold objects (cups, foils, packaging), forming a thin metallic layer. The entire cycle takes between 4 and 6 minutes. The thermal evaporation method used in the PVD (Physical  ...

Features Volume 40000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7500 mm Height 5800 mm Diameter width 2800 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 central to DN 40 Threaded Socket DN 50 Fermentation valve DN 50 Check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange 4 calotte feet, heigh ...

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer

Net price: 12.800,- € Gross price: €15,232.- - - - - - Emergency generator 60 / 66 kVA + + NEW - Year of construction 2026 + + - - - - - Engine: - Baudouin (French manufacturer of diesel, marine and industrial engines) - 4 cylinders - Diesel - Water-cooled - 1500 rpm - Power: 57 kW / 78 hp - Electronic speed controller - - - - - Generator: - Leroy & Somer (France) or Linz (Italy) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital Start Unit (ComAp AMF25) - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 236 x 116 cm - Weight: 1270 kg - Tank volume: 260 litres - Sound level: approx. 67 dB (7m) - Consumption: 7.7 l/h (50%) / 11 ...

Net price: 16.800,- € Gross price: €19,992 - - - - - Iveco Emergency Power Generator 60 / 66 kVA - NEW + + incl. 800 litre large tank + + - - - - - Engine: - Iveco (Italy) - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) or Linz (Italy) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp AMF25 Start Unit - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 236 x 116 cm - Weight: approx. 1300 kg +/- - Tank capacity: 800 litres - Sound level: approx. 64 dB (7m) - Consumption: 7.2 l/h (50%) / 10.3 l/h (75%) - - - - - Other: - An integrated socket package (see pic ...

Net price: 13.900,- € Gross price: €16,541.- - - - - - Emergency generator set 100 / 110 kVA + + NEW - Year of construction 2026 + + - - - - - Engine: - Baudouin (French manufacturer of diesel, marine and industrial engines) - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) or Linz (Italy) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital Start Unit (ComAp AMF25) - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 267 x 116 cm - Weight: 1380 kg - Tank capacity: 370 litres - Sound level: approx. 67 dB (7m) - Consumption: 10.6 l/h (50%) / 16 l/h (75%) - - - - - Other: - An inte ...

Kemper vat wagon with boiler Kneading boiler vats for spiral kneader Kemper SP 250 AL Stainless steel boilers with carrying handle for a maximum of 250 kg flour for max. 400 kg dough Dimensions Boiler diameter inside 125 cm Boiler height 60 cm

Multi Panel, MP370 KEY-12 TFT, 6AV6 542-0DA10-0AX0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us

Elegant effects for book covers and packaging For industrial embossing of solid grey board in bookbinding and in the further processing of fine packaging. The stabilized embossing head guarantees precise embossing even with non-centred embossing clichés. For blind, relief or film embossing of rigid, flexible and plastic cases at up to 80 cycles/min. The PE 312 processes the whole bandwidth of cover materials with blind, relief or film embossing. Can be adapted for optimal processing of different materials by stepless adjustment of temperature and embossing pressure and by adjusting embossing time in steps of 10 seconds. Matrix plate with hole grid for attaching embossing blocks. Save make-ready time by preparing the matrix plate offline. Application : • Blind, relief or hot foil stamping • Combination of micro-embossing and structure embossing Technical data : Hardcover 1 ...

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales