k tron used for sale

Cone Dia.: 800 mm - With Electrical motor

2.The main structure and performance of the machine tool: This machine tool is designed and manufactured using the latest technology, ensuring its strength, rigidity, and safety. Its simple and elegant appearance and exquisite workmanship demonstrate meticulous machining and component assembly. The machine utilizes a single, high-quality welded steel structure, resulting in a thick, rigid frame. The machine surface is sprayed with imported rust-resistant primer and topcoat, ensuring it remains as good as new for a long time. The frame and upper working slide are machined using imported large-scale CNC floor-type boring and milling machines, ensuring the required positioning accuracy of all mounting surfaces. This machine tool primarily consists of a frame, upper slide, backgauge system, slide, synchronous control device, mold, hydraulic system, and control system. 2.1 Frame: This pa ...

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

Bevel gearbox, KS35FH 17,5:1 13R Sa.S29, Grässner, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! Current new price approx. € 8,600 excluding VAT The gearbox was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. Bevel gearbox, KS35FH 17.5:1 13R Sa.S29, Grässner, as good as new -60% 1235FH000051, I=17.5:1 including flange B5-VK142/165/130 F7 and hollow shaft d1=24x53 Gearbox with reduced backlash Angle of rotation on shaft d2 (without load) less than 5 angular minutes Output shaft d2 extended for shrink disc connectnio Installation position: All shafts horizontal 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer,  ...

Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Accessories: • Machine is already dismantled and stored • Duplex unit • Discharge unit • 13 GB RAM/HDD • Paper cassette (1 x 1,000 sheets) • Starter and drum • MB-511 Manual Banner Feeder • MK-760 Banner Feeder Kit for MB-511 • PF-812 Large Capacity Magazine for Long Formats • FS-532m Staple Finisher with Autom. Staple trimming • MK-761 Banner Output Tray for FS-541/OT-512 • MK-732 Mounting Kit for PI-502 • PI-502 (2 compartment attachment unit) for FS-541/532 • RU-518m cooling/smoothing unit with output function • IC-609 Konica Minolta Embedded Controller C4070/C4080 • UK-220 APPE Kit for IC-609 • IQ-501 Integrated Color Care Unit • Patlite/External light for system status 4-colour • VI-514 interface for IQ-501 • AccurioPro Flux Essentail • Flux Preflight Pro • AccurioPro Flux Multi Seat Year of construction: 2024 A ...

Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3 Rittal SK 3201.300 and Rexroth R911170402-102 as well as Murr Elektronik 54205 CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402 102, Control Box, Distribution Box, Distribution Cabinet, Manifold, Cooler, Refrigeration Unit, Imaging, Camera, Camera Cable all other installed parts are included in the scope of delivery (see illustrations) Total dimensions (with Rittal cooler):Width: approx. 45 cmDepth: approx. 23 cmHeight: approx. 45 cm Total dimensions (without Rittal cooler, only the cabinet itself):Width: approx. 30 cmDepth: approx. 23 cmHeight: approx. 40 cm Modules:Keyence CV-5501P digital image receiverKeyence CA-DC20E expansion unitKeyence CA-MP81 monitor screenKeyence CA-D3R cable for LED lightingKeyence CA-CN3 cable camera cableRittal SK 3201.300 thermoelectric cooling unit (100 watt cooli ...

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

; Gross weight [kg]: 520; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 60

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-600 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t Version as built by Kellenberger until 2012. Partly overhauled with a warranty period of 12 months after delivery in Germany and neighboring states. Overhauled and geometrical overhauled according to Kellenberger measuring protocol. optional internal grinding attachment up on request - digital display in x-a ...

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1926; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE165GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 325

; Gross weight [kg]: 1931; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Caterpillar DE200GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 325

; Gross weight [kg]: 4500; Engine: Iveco CR16TE1W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New and unused 2019 generator set with 0 running hours.; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Power [PS]: 598; Gross weight [kg]: 7885; Engine: Cat C18; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built in switch 50/60 Hz; Water Tank Volume [l]: 1125

; Gross weight [kg]: 4879; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 842

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

; Power [PS]: 2243; Gross weight [kg]: 26000; Engine: KTA50-G16A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 2000

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

Control Other MAPPS IVB Grinding length [mm] 150 Specifications: Grinding ø (max.) 350 mm Grinding length (max.) 150 mm Grinding wheels-ø 25-180 mm Swivel range grinding headstock (max.) 230° Grinding spindle: Technology internal grinding spindle Speed range 3-20,000 rpm Power (max.) 11 kW Grinding wheel holder HSK-A63 Drilling spindle: Drilling spindle technology Speed range 1,500-3,500 rpm Power (max.) 7.5 kW Tool holder HSK-A63 Workpiece spindle: Technology Direct Drive Clamping surface ø265 mm Table load (max.) 200 kg Workpiece Clamping Pneumatic Chuck General: Travel in X/Z 965/532 mm Rapid traverse in X/Z 24/20 m/mim Equipment/accessories: Direct displacement measuring system (glass scale) in X/Y Chip Management Magnetic Belt Conveyor Coolant management coolant system with paper belt filter and temperature control Workpiece Measurement P ...

Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

; Gross weight [kg]: 2203; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 418

DeDietrich oil boiler QUANTROL Temperature Controller Tube in tube heat exchanger LIVERANI Stainless Steel Impeller Pump Pre-installed mobile complete system with impeller juice pump, efficient boiler, heat exchanger and automatic control, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 63kW boiler with oil burner circulating pump Pressure expansion tank Automatic temperature control Tube in tube heat exchanger Capacity 750l juice /h Oil consumption: approx. 6l/h at full load

; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 418

Pasteur 500l/h Gas newly overhauled automatic temperature control

High-performance fine cone crusher Calibrator 1600/300 H III

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

Caterpillar DE220GC Generator Set specifically designed for stand-by duty.; Gross weight [kg]: 1933; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 325

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 500

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.