k tron used for sale

; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289

; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

for cellophanizing of chocolate boxes top condition Siemens PLC with 2 adjustable folding fittings 2 machines available, price is per piece

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

Y.O.M.: 1991 No.: 4745 2 hoppers, 1x with double jacket Scraper agitator speed-controlled Homogenizer speed-controlled Double jacket pressure-resistant Temperature controller, vacuum Condition: very good Dimensions LWH: 1100 x 600 x 950 mm Weight: approx. 300 kg

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

; Power [PS]: 239; Gross weight [kg]: 2043; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 394

; Power [PS]: 272; Gross weight [kg]: 2782; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 528

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

; Power [PS]: 299; Gross weight [kg]: 2782; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 528

; Power [PS]: 326; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 71

; Gross weight [kg]: 4575; Engine: Perkins 2206A-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 888

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

; Power [PS]: 544; Gross weight [kg]: 5033; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 888

; Power [PS]: 54; Gross weight [kg]: 979; Engine: 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Gross weight [kg]: 5071; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good

; Power [PS]: 658; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 71; Gross weight [kg]: 993; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 145

; Power [PS]: 71; Gross weight [kg]: 778; Engine: Perkins 1103A-33T; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Gross weight [kg]: 4342; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 778; Gross weight [kg]: 5874; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, FG Wilson P715-3 Generator Set; Water Tank Volume [l]: 1132

; Gross weight [kg]: 4522; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 925; Gross weight [kg]: 6629; Engine: Perkins 2806-E18TTAG5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1529

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.

; Gross weight [kg]: 1144; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and coolant heater; Water Tank Volume [l]: 180

; Power [PS]: 96; Gross weight [kg]: 944; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 180

Transfo 40 kVA

Cummins Engine Building year 2010 Power 600@1800 rpm low hours

Cable length meter, -robust machine version, measuring wheel circumference 500, -with mech. Counter for 9999.99 m. measuring accuracy of 0.4%. -Number height 7. -Cable diameter 20-120mm Nudlmuhk With the electronic pre-selection counter as an accessory, the desired cable length can be preselected and the winding machine can be switched off. This machine does not have an official calibration.

2 times in stock

; Power [PS]: 239; Gross weight [kg]: 2191; Engine: Cummins QSB7-G5; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 400

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

; Power [PS]: 598; Gross weight [kg]: 5350; Engine: Cummins QSZ13-G10; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995

; Power [PS]: 72; Gross weight [kg]: 1453; Engine: Cummins 4BTAA3.3-G14; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 200

; Power [PS]: 60; Gross weight [kg]: 1263; Engine: Cummins 4BTAA3.3-G14; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 200

; Power [PS]: 489; Gross weight [kg]: 3840; Engine: Cummins QSG12-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995

running direction: right - left for 28 mm VacuVent closure with safety housing

-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile

; Power [PS]: 185; Gross weight [kg]: 1973; Engine: Cummins 6BTAA5.9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 400

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Machine No.: 2009.14 Power: 5.5 kW Pharmaceutical version as good as new Stainless steel with funnel (approx. 60 l) Switchgear EEx various spare parts, new cross-toothed grinding set LWH: 800 x 700 x 1400 mm Weight: approx. 120 kg

; Power [PS]: 120; Gross weight [kg]: 1840; Engine: Cummins 6BTA5.9-G5; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 400

; Gross weight [kg]: 5952; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1082