k tron used for sale

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

Load on the pivot around 41 t ISO container recording 10 / 20 / 30 / 40 foot Make: various renowned manufacturers Workshop review: 2015 various spreader: fix, telescoping, manually and with Tongs utensils for swap bodies Fully functional workshop overhaul and paint renewal upon request.

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

Complete coffee roasting and packaging line consisting of: coffee bean silos, coffee roaster, coffee mill, vacuum packaging machines (125 gr, 500 gr , 1000 gr) Price new 1.200.000 Euro For sale, price on request

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KRONES Canmatic Running direction: left Continuous linear/normal Performance about 40,000 bottles / HR Including format sets for 1.5 liter, 1.0 liter, 50cl. and 33cl PET bottle Spray system by ROBATEC The machine is in good condition and is available from November 2015.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Price per piece! Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 140 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 4,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. B2xwaxdlj8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf in ...

Price per piece! Currently in stock: approx. 51 pcs. Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 110 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 3,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed S ...

1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.

Basic refurbished belt circular operator SBR 2500 New chassis made of stainless steel New tapes New electrics Mehler Completely disassembled and rebuilt. 6 Month Warranty Immediately available

Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

type mechanic: KR6-2 type Control: KRC1 max. load: 6 kg workingrange: 1570 mms repeat accuracy: +/-0.1 mm net weight: 222 kg very good state, functional checked. year of construction: 2000

Kohler Diesel Generator Set 11 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 16 hp - 954 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 10 / 11 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 16A socket - incl. hedging - Key start - Voltmeter - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 95 x 65 cm - Weight: 235 kg - Consumption: 2.5 ltr. / h (75%) - - - - -  ...

Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Kohler Diesel Generator Set 11 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 16 hp - - - - - Generator: - Manufacturer: Linz (Italy) - 11 / 12 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 106 x 62 cm - Weight: 183 kg - Consumption: 2.5 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 11 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting platf ...

Conveyor belt system consisting of: 1 PCs. Bunker task band Above ground A A = 3500 mm Conveyor width = 1100mm Power 1, 5kW 1 PCs. Trail band A A = 4700 mm Conveyor width = 1100mm Discharge height 2800 mm incl. driver 40mm high Power 1 .1kw primed and painted More info and price on request

The inlet table is available. The machine is partially modernized with Siemens. The refrigeration unit is from 1998 The tape is available Bandwidth: 1050mm

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz

Key data: 7 , 9 , 400

Diesel generator set 9 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 4-stroke, diesel, air-cooled - Displacement: 498 cc - Power: 12 hp - - - - - Generator: - 9 kVA at 400 volts - 7 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - 1x 230V Schuko - Incl. RCD - - - - - Equipment: - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when the oil level is too low) - Overload protection - Automatic start interface (ATS connection) for easy inse ...

Diesel generator set 13 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 2-cylinder, diesel - Water-cooled - Displacement: 794 cc - Power: 11.5 kW / 16 hp - - - - - Generator: - 12 / 13.2 KVA at 400 volts - 9 / 9.9 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Digital start unit (ComAp InteliLite 9) - Manual start at the push of a button - Automatic start function - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - Incl. RCD - - - - - Equipment: - Soundproofed housing - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when t ...

The infeed table is available. The machine is partially updated with Siemens. The cooling unit is the band from 1998 is available Band width: 1, 20 m

Numer katalogowy 6349 DANE TECHNICZNE - max szerokość obrabianego elementu 250mm - max wysokość obrabianego elementu 110mm 2 agregaty szlifujące: górny i dolny z góry: - 2 rolki dociskowe poślizgowe - agregat szlifujący 2 walce metalowe + trzewik - rolka dociskowa poślizgowa - taśma gumowa ciągnąca – VACUM z dołu: - taśma ciągnąca - 2 rolki poślizgowe, metalowe - agregat szlifujący 2 walce metalowe + trzewik - 3 rolki wyprowadzające ciągnące, metalowe - czyszczenie papieru przy agregacie górnym i dolnym - elektrycznie ustawiana wysokości szlifowania - oscylacja taśm szlifujących - płynna regulacja prędkości posuwu na falowniku - silniki główne 2×5,5kW - zapotrzebowanie powietrza 8bar - średnica króćców odciągu 4x100mm - wymiary całkowite dł/szer/wys 1400x1200x1850/2250mm - waga 1490kg – do krótkich ele ...

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Displacement 3.33 ltr., power 55 kw/74 hp 36/36 speed manual transmission with hydraulic reversing gear and powershift stage Vmax 40 km/h All-wheel drive can be switched on, automatically engaged during braking, Differential lock both axles (front self-locking) Front power lift FOLGER Cat. II + + ports dw Hydraulic connections 3 x dw at the rear Tyres 320/85 R20 AS (12.4 R20 glue) front, co-steering fenders Tyres 420/85 R30 AS (16.9 R30 glue) rear Rotating 6 work lights, auxiliary main headlights for winter service use Air-sprung Grammer Comfort driver's seat with armrests Air conditioning, Recirculation, Radio, Passenger seat PTO 540/540E, speed accumulator, with external switch on the rear fender Rear power lift Cat. II with high-speed hooks, Automatic pull mouth, height adjustable in grid rail Glass roof cabin with sun visor, interior spies, exterior mirrors ca ...

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Vertical pallet transport

Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...

1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...