131,204 used machines on RESALE, but how to find them? Machine Search
Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW
max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool holder, tool holder, milling holder, milling tool -Manufacturer: Komet, Mount: SK50 -Type: AB 50x80x60 Ex CELL-0 -Dimensions: 95/90/H185 mm -Weight: 3.7 kg
new
Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;
cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 6 pieces -Type: various versions see photos -Hole: Ø 40 mm -Price/Delivery: complete -Transport dimensions: 300/200/H240 mm -Total weight: 24.8 kg
A NEW USED Compact - FLAT - FINGER-JOINTING line Manufacturer: GÖTZINGER Year of construction 2019 Max. 140 mm x 80 mm Min. 20 mm x 30 mm Built up and immediately available Milling, gluing, pressing, capping Sale as inspected without warranty and guarantee Self-dismantling with full assistance For the production of all mouldings inside and outside, floors and much more. All built in a line, about 35 m long. Gluing one-component PU glue waterproof Technical description on request
Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK50 cutter head chuck, 2 pieces -Type: various designs, see photos -Hole: Ø 22 mm -Price/Sale: complete -Dimensions each: Ø 97 x 175 mm -Weight: 11.6 kg
Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...
Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Servo drives from Indramat KDS 1.1-100-300-W1
electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA72071-ABO34-7 -Power: 30 kW -Speed: 2950 rpm -Shaft: Ø 55 x 110 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 790/510/H410 mm -Weight: 244 kg
wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg
conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg
ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg
4 colors, Possible pressure variation = 4+0 Film width max : 1120 mm Print width max : 1040 mm Repeat : 300 - 800 mm Max. speed (mech.) : 200 m/min Unwinder diameter : 1000 mm, core 76 / 152 Rewinder diameter : 1000 mm , core 76 / 152 Dryer heating medium = GAS, Incl: 4 electric pumps Existing printing cylinders, anilox rollers and sleeves
Key data: 500 mm, 500 mm, 90 mm
Scribing plate tap and piston Used Condition: Good
The scope of delivery includes: 01x Shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material colour: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | Pcs. Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or contamination may be present. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm -Weight: 40 kg
three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 225 M2 -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 x 110 mm -Protection class: IP54 -Design: B3 -Dimensions: 770/420/H510 mm -Weight: 286 kg.
grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece
A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request
Indramat Power Supply-----Power supply Type CO 1.3-100-220
SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed
Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.
lever hoist, chain hoist, assembly hoist, assembly chain hoist, pulley block, spur gear pulley block -Manufacturer: GEDI, chain hoist -Load capacity: 3 tons -Hook path: 10 m -Transport dimensions: 700/600/H350 mm -Weight: 114 kg
Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³
oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg
screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Kale, pipe clamps 139 pieces -Type: Ø26x15 mm W1 -Clamping range: 26 mm -Band width: 15 mm -Dimensions each: 54/38/H15 mm -Weight: kg
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available
Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg
Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.
Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg
Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and tested; Flat pile feeder FFH; Format max.56x90cm, min.14x18cm; 4 automatic folding pockets; 1x Sword; 1x downstream folding pocket; shed display; Altar fold pocket with control unit ACC2 2.4; Compressor. Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and checked; flat pile feeder FFH; size max.56x90cm, min.14x18cm; four automatic pockets; one sword; one downstream pocket; stream delivery; gate fold pocket with control system ACC 2.4; compressor.
Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...
Koma blast freezer refrigeration unit with Bitzer compressor S6F-30.2Y, as solo compressor or S66F-60.2Y, tandem compressor Refrigeration unit with compressor, subcooler, oil separator, liquid separator, collector, filter, pressostats, control box. All on one rack, easy to transport.
Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg
Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW
Bezel, steady rest, lynette -Steady: for crankshaft grinding machine -Dimensions: see photos -Dimensions: 420/110/H270 mm -Weight: 20.8 kg
Gebrauchtmaschine, price: 4000 Euro ohne Transport
4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg
three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.
Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg
Inv. Num. : 7310 Type: KX3 Producer: Numco Generated:- Parameters: Control system: MACH 3 Maximum bore: 20 mm Work table length: 450 mm Work table width: 160 mm Maximum vertical spindle speed: 5000 1/min X-axis travel: 300 mm Y-axis travel: 150 mm Z-axis travel: 290 mm Cone: MK3 Machine height: 1750 mm Machine length: 800 mm Machine width: 780 mm Machine weight: 220 kg
Container conveyor system Knapp Over 650 meters Knapp conveyor system with 57 and 65 cm width, many special components, year of construction 2010 This very well-maintained conveyor system from Knapp serves 6 packing stations and 6 picking stations and offers the possibility of putting together any desired system of similar size. The components are diverse: • Pressure-free roller conveyors with pneumatics • Over 15 roller conveyor curves with flat belt and round belt drive • Some routes are suitable for transverse transport (conveyor width over 60 cm) • 2 Nerak conveyors with a lifting height of over 10 metres • Over 20 belt converters • Belt conveyors of various lengths • Packing tables and scales General conditions The system can be dismantled by the buyer. Or we offer dismantling. The system can be reconfigured together with us. The combinat ...
maximum number of results exceeded
please refine your search
