k t used for sale

Evaporator Küba SGB 073C, YOC 2006 Capacity 16.3 liters Three fans sucking 630 watts Velvet Injected Valve Built-in Suitable for TK or plus cooling In very good condition

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist 1.5 ton -Load capacity: 1 1/2 ton -Chain Length: 3m -Quantity: 1 piece -Price per piece -Transport dimensions: 660/300/H150 mm -Weight: 19 kg/pc.

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Proximity switch, proximity sensor, proximity sensor -Manufacturer: Keyence, proximity switch proximity sensor unused original packaging -Type: EM-030P -Number: 2x encoder available -Price per piece -Dimensions packaging: 110/105/H25 mm -Weight: 0.1 kg/pcs

Square bread roll line Kemper Quadro Fit -Manufacturer: Emil Kemper GmbH - Type: Quadro- Fit -Built in 1999 -with moistening and sowing

Key data: 1300 kN, 40 mm

Stock No.: 503267 Manufacturer: KRAUSS MAFFEI Type: KM 130-380 CX Control: MC5 Year of construction: 2007 Hours: 48294 h Clamping force: 1300 kN Holm dimension v: 525 mm Holm h: 525 mm Plate size h: 820 mm Plate size v: 845 mm Min. installation height: 300 mm Plate dread max.: 900 mm Aperture travel: 600 mm Screw diameter: 40 mm Displacement: 201 ccm Spray pressure: 1860 bar Machine dimensions LxWxH: 5.7m x 1.6m x 2.1m Total Weight: 7800KG Equipment On-screen text German CEE socket 16A Core hoist hydraulic 2x Air valve 1x Air valve 2x Machine with water battery Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Interface for coloring device Selection Unit

Auto. Attack Roller conveyor 4000 mm, right

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Rexroth, 3-phase permanent magnet motor -Type: MKD041B-144-KPO-KN -Speed: 7500 rpm -Shaft: Ø 14 x 30 mm -Dimensions: 275/83/H112 mm -Weight: 4.6 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the softwa ...

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

max. format 40 x 57 cm Built in 1970 Single sheet feeder Conventional dampening system Price on request. We deliver and install worldwide!

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

We sell a Konica Minolta AccurioPrint C759 with Fiery IC-418 print controller. The machine was under maintenance contract with Konica Minolta until it was dismantled and is in very good condition. Total Counter: 534,184, Black: 226,878 and Color: 307,306 Price: VHS Preferably pick-up in Munich. Shipping on request and at an additional cost. Vat-ID. available. We have other very good and up-to-date Konica Minolta copiers in stock: 3x Konica Minolta Pro 1100, some Bizhub 3622, some Bizhub C3300i, Bizhub C250i, C360i, C550i, AccurioPrint C759 and AccurioPrint C750i etc.

We sell a current model of Konica Minolta AccurioPrint C750i Flux with booklet finisher. Low meter reading. The copier was under maintenance at Konica Minolta until it was dismantled and is in very good condition. Konica Minolta AccurioPrint C750i Flux with Finisher Booklet Finisher FS-539 SD, Punch Kit PK-524 and RU-519 Relay Unit. Total counter: 156,620, black: 62,867 and color: 93,753. Preferably pick-up at our warehouse in Munich. Shipping on request and assumption of costs. We have other current models from Konica Minolta: Bizhub 3622, C3300i, C250i, C360i, C450i, C550i, AccurioPrint C759 etc. Also 3x Konica Minolta Pro 1100. Ask us, we will get back to you as soon as possible.

-Manufacturer: Knecht Maschinenbau GmbH -Type: VS-324 -Year of construction 12 / 2007 -4.61 kW -12.16 A -400 volts -50 Hz

Length 5000mm Web width 395mm

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

See appendix for the current complete inventory list. Sellers of different models, types and sizes. For deep freezing, plus cooling and air conditioning. With or without defrosting, different slat widths. Models such as: SG, SP, DE, DZ, DF, DP Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at Website: frigocom.at

Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter.

16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system

Product number: 2859 Type: K64DC8Q-VA Serial number: 99099-1 Year of construction: 1999 Bowl: 65 litres Knives: variable speeds Bowl: 2 speeds Steam: 1.5 Bar, 55 kg/h Vacuumpump: Elmo 2BV2071, 125 m³/h Power: 3 x 400V, 50Hz, 50kW Dimensions: 1750 x 1950 x 2000 mm Weight: 1700 kg With unloader, water dosing, tempurate indicator

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.

Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS80N4/TF/IS -Speed: 1400/91 rpm i= 35.57 -Power: 0.37 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 490/120/H210 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS100M4/TF/IS -Speed: 1445/41 rpm i= 35.57 -Power: 1.1 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 600/162/H255 mm -Weight: 43 kg

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK2 M16 -Type: 40x2 -Dimension: 60/55/H178 mm -Weight: 0.9 kg

Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct

length in total: ca. 3500 mm band width: ca. 700 mm conveying height: ca. 1200 ejection height approx.: 1200 mm dimensions of the machine ca.: ca. 3500 x 1300 x 1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-31-G -Number: 15x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid construction, mobile -Width: 2000mm -Depth: 800 mm -Height: 850mm -Table top: thickness 25 mm -Base: 4 swivel castors, 2x with parking brake -Quantity: 20 pieces -Price per piece -Weight: 51 kg

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid version -Width: 2500mm -Depth: 800 mm -Height: 755mm -Quantity: 1x workbench available -Weight: 53 kg

Bread roll and bread roll line Fortuna + Kövy with Fortuna head machine KM 6 with settling belt Built in 1999 Maximum hourly output 8400 pieces Weight range: 40-80gr In need of an overhaul