k t used for sale

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

Bottle filler, make Krones, type: VKS 84 / SV 12-094 RM, for lemonade and mineral water 24.000 bph, with 84 filling valves (mechanical with float control), with 12-head screw capper make Zalkin, for MCA 28 aluminum caps, right machine, built 1992

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Load per column: 0 Load per cantilever: 0 Cantilever lenght: 250-800 mm Rack height: 2250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

wire diameter 1- 5 mm speed - meter/min ca. 15

wire diameter 2-7 mm output - pieces/min 100

For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 07.FO.R01-1228 -Input: 200 ... 240 V 50/60 Hz -Price: per piece -Number: 4 piece -Dimensions: 340/190/H85 mm -Weight: 3.3 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg

Wire electrode, welding wire, welding wire, flux-cored wire -Manufacturer: Krupp, shielding gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 Ø 0.8 mm -Dimensions: Ø 300/100 mm -Total weight: 15.4 kg

Kroll heating mobile as hall heating, years of construction 194/95, see picture type plate

Cold room with two doors for blast freezer and freezer. Panel thickness 100mm Mass: Length 600 cm. Width 300 cm. Height 260 cm. Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Dial indicator, dial gauge, measuring probe, centering device, centrizer, 3D probe, probe insert -Manufacturer: Käfer, dial gauge measuring range: 0-3 mm -Reading: 0.1 mm -Number: 3x dial gauge available -Price: per piece -Dimensions: 175/80/H30 mm -Weight: 0.2 kg/piece

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Krohne, variable area flow meter -Type: DK800/N -Measurement: gas or liquid quantities -Number: 5x measuring devices available -Price: per piece -Dimensions: 175/105/H30 mm -Weight: 0.5 kg/piece

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg

Quick Snap brush segment, brush, plastic brush, nylon brush, weed brush, conical brush -Brush: Steel/plastic bristles -Wooden ring: Ø 490/328 mm -Quantity: 1x brush included -Price: per piece -Dimensions: Ø 760 x 260 mm -Weight: 9.2 kg/piece

Crawler axle, crawler chassis, mini excavator, tracked excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -tensioning cylinder

Sensor, probe, immersion probe -Manufacturer: KFG Level, magnetic level sensor -Type: KA-10310/3 -Dimensions: 215/150/H75 mm -Weight: 0.4 kg

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 225 mm -Technical drawing: see photos -Dimensions: 385/115/H265 mm -Weight: 20 kg

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180

Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW

Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.