k t used for sale

Gear motor, electric motor -Speed: 54 rpm -Power: approx. 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 360/180/H180 mm -Weight: 13.7 kg

Gear motor, electric motor -Speed: 25 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 340/185/H170 mm -Weight: 10.9 kg

Three-phase motor, electric motor -Power: 7 kW -Speed: 1900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 410/275/H330 mm -Weight: 40 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg

Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others

Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

Hydraulic surface grinding machine Kair TM800x400. Max. table travel: 800mm. Max. cross travel: 400mm. Height over grindstone: 260mm. Main motor power: 3hp. Speed: 2000rpm. Grindstone: 250x40x76mm. Max. dimensions magnetic chuck: 600x300mm. Weight: 1800kgs. Dimensions: 2500x1500x1900mm.

Holset / KBB MR5-3 turbocharger suitable for MaK 8M25 Engine in good condition with reports available

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Key data: 35 mm

New drill motor 230V - Part No. TB02752

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

NEW electronics 230V - TB09050-1 - from spare parts warehouse

NEW - Electronics 230V - from spare parts warehouse.

NEW - Electronics 230V from spare parts warehouse.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: TER Tecno Elettrica Ravasi, Crane remote control with cable / Portable control panel for crane -Cable length: 25 m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Auxiliary switch, circuit breaker, circuit breaker, switch disconnector, switch disconnector, circuit breaker, circuit breaker, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, main switch disconnector -Type: B T103/01 -Dimensions: 65/65/H105 mm -Weight: 0.2 kg

Inv. Num. : 7171 Type: TZB 1-5.5/700 Producer: Kovo Staněk Generated: Parameters: Max. workpiece diameter: 345 mm Maximum filling volume: 165 dm³ Throw wheel force: 7.5 kW Blasting chamber internal dimensions: 720 x 800 mm Maximum load: 350 kg Max. weight of the part: 15 kg

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

Capacity up to 6 tons For more details contact with us

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-

-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010

loudspeaker, Waterlight Horn -Manufacturer: Kemmler, Loudspeaker -Type. ZS 0541 T330 ML 24V -Volume: 69 to 77 d BA -Dimensions: 130/90/H50 mm -Weight: 0.2 kg

diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.

AUTOMATIC COLOUR INKING MIXING KITCHEN 31 colors; for TEXTILE INDUSTRY : MAKE : TERMOCOLOR TYPE : ROT YOC : 2003 , refurbished 2012 VALVES : 6 THICKENER & 31 COLOUR, NO. OF VESSELS : 6 COMPUTERISED COLOUR DISPENSING SYSTEM & WEIGHING WITH DRUM TRANSPORTATION & STORAGE

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, Main switch, Load break switch 80 A -Type: KG80.T304 -Rotary drive: -Dimensions: 110/95/H130 mm -Weight: 0.8 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: QVKS, Axial fan type KS12038HA2-T7L -Voltage: 230 V / 19 W -Number: 1x fan included -Dimensions: 120/120/H40 mm -Weight: 0.5 kg

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

9 rolls of 3,048m each Price per m new, partly original packaging

tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mm Shipping weight: ? kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mains filter for frequency converters -Type: 09.E4.T60-0001 -Quantity: 1 piece available -Price: per piece -Dimensions: 90/260/H50 mm -Weight: 1.5 kg

Inductive sensor -10-65 VDC 200 mA -Sn: 100 mm -Quantity: 5 pieces available Price: per piece -Weight: 1 kg

Cutter Manufacturer: Talsa Model: K30ns Strong, all stainless steel construction, solid bowl and lid Very high cutting speed, fully variable from 500 up to 3500 rpm Smooth start of knives due to electronic drives, overload protection Electric device to prevent condensations inside the machine frame Transparent noise protection cover Volume: 30 liters Bowl Capacity: ± 5-22 kg Electric power: 5.6kW Voltage: 380V 50Hz Weight: ± 330 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating