130,269 used machines on RESALE, but how to find them? Machine Search
Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.
20152 CUMMINS KTA19-M3 600 HP 1800 RPM 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm APPROX 2500 KG
Key data: 36 KW, 45 kVA, 400 V
ON HAND NEW STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-YSV4536 Primary power: 45 kVA / 36 kW Standby power: 49 kVA / 39 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Yanmar Engine Model: 4TNV98CT-IYE Displacement (L): 3.32 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1263 mm Weight open: 960 kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and ...
Key data: 48 KW, 60 kVA, 400 V
ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
Key data: 160 KW, 200 kVA, 400 V
Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...
Key data: 400 KW, 500 kVA, 400 V
Generator Set Specifications: Model: EQ-I400320 Primary power: 500 kVA / 400 kW Standby power: 520 kVA / 416 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: CURSOR13TE7W Bore x Stroke (mm): 135 x 150 Displacement (L): 12.9 Compression ratio: 16.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 4810 mm Width: 1600 mm Height: 2560 mm Weight Open: 4890 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible ...
Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm
Key data: 48 KW, 60 kVA, 400 V
Made in EU Warranty for 30 months Completely new Generator Set Specifications: Model No.: EQ-I4536 Primary power: 60 kVA / 48 kW Standby Power: 66kVA / 52.8kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF45SM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight Open: 1101 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breake ...
Key data: 24 KW, 30 kVA, 400 V
Produced in the EU Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, welded steel chassis Fuel tank integrated into the cha ...
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...
Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel
1 unused! PC09 programmable controller, make Kisters, type PC09, new 1999. OEM spare part number X000500001.
New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working ...
Key data: 24 KW, 30 kVA, 230 V
This generator is manufactured in the EU according to all European standards 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...
Key data: 80 KW, 100 kVA, 230 V
Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of Make: 2014 Cutting side passage max.: 280 mm Max. cutting height clearance: 300 mm Table dimensions: L59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. Sale according to § 25a of the Value Added Tax Act of margin taxation. A proper invoice will ...
Used machine: Kettner / Krones Blitzpac JUNIOR – carton and crate packer with 3 packing heads Manufacturer: Kettner / Krones Model: Blitzpac JUNIOR Capacity: up to 300 cycles per hour Packing system: 3 packing heads Efficient packer for cartons and crates The used Blitzpac JUNIOR packaging machine is a proven solution for the automatic packaging of bottles or containers in crates and cartons. It is ideal for medium-sized and large bottling companies in the beverage or food industry. Technical features: • Robust design for continuous operation • 300 cycles/hour – high efficiency in the packaging process • 3 packing heads for flexible handling of different formats • Compatible with common crate and cardboard dimensions • Proven Krones/Kettner quality Applications: • Beverage filling (beer, water, soft drinks) •Food industry • Packaging of bottles ...
A used single-leaf envelopment system KAS Mailmaster 465 Speed Max: Up to 4000 cycles/hour Packaging thickness:: up to 15mm Envelope sizes: 229 mm x 110 mm to 335 mm x 240 mm
Storage paternoster, Kardex, approx. 5.96m high, 250kg / gondola – used - : Price ex location: 14.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer Kardex Type: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, before 2000 Device height: approx. 5.96m Device width: approx. 3.01m Device depth: approx. 1.24m + 0.30m for the table shelf = total 1.54m Number of gondolas: 40 pieces Dimensions of gondolas: Width: approx. 2.48m Height: approx. 23cm Depth: approx. 41cm Max. load capacity per gondola: 250kg Total permissible payload: 10,000kg Unload: 1,000kg Dialing the gondola via the number of the gondola no longer works – the device must be controlled via the up/down button. Condition: good, Available: immediately Location: 45481 Mülheim a.d. Ruhr
Diesel forklift with a load capacity of 3,000 kg and a Kubota engine offers impressive performance and manoeuvrability. It is ideal for tight warehouses and confined work areas, as it ensures low fuel consumption and high reliability. With its robust construction and strong pulling force, this forklift is perfect for versatile applications in different environments. We offer a wide range of electric, gas and four-wheel drive forklifts with load capacities from 1 to 10 tonnes. If you need any further information, please do not hesitate to contact us. Specifications: - Load capacity: 3,000 kg - Engine: Kubota 4-cylinder diesel engine - Lifting height: up to 4,500 mm - Steering: Hydrostatic - Travel speed: max. 20 km/h - Tyres: pneumatic tyres, front: 6.00-9, rear: 6.00-9 - Total weight: approx. 4,800 kg - Tilt angle: 6° Tyres: - Front tire: 6.00-9 (pneumatic tire) - ...
Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!
Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.
Diesel forklift with a load capacity of 3,500 kg offers impressive performance and manoeuvrability, ideal for warehouses and tight work areas. With a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it ensures efficient fuel consumption and high tractive force. We also offer electric forklifts, gas forklifts and four-wheel drive forklifts in various capacities and options, including chassis adjustment, double telescopic mast and an ergonomic cab for comfortable operation. - Load capacity: 3500 kg - Emission standards: EU Stage V, EPA Tier 4 - Engine: Kubota V2607-CR-EW03 - Power: 38 kW / 50.9 hp at 2200 rpm - Torque: 174.1 Nm at 1500 rpm - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Max. lifting height: 3000 mm (standard fork) - Fork dimensions: 1070 x 125 x 45 mm - Total weight: 4700 kg - Vehicle width: 1225 mm - ...
New, reinforced and smooth-running beverage market cart from the manufacturer Katschotec with an additional basket for small parts. The trolley is not only ideal for beverage markets, but is also frequently found in DIY stores and electrical stores. Our B-goods are new goods with small flaws, such as .B small paint defects. Technically/functionally, our record trolleys are absolutely flawless. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Katschotec • Total dimensions (LxWxH): 970 x 525 x 40 mm • Dimensions platform (LxB): 740 x 470 mm • Dimensions basket (HxTxL): 250 x 170 x 485 mm • Stack depth: 230 mm • Stable flat oval tube construction with round tube handle • Ergonomically shaped handle protection caps • 4 steering wheels • Weight: 21 kg These are plate wagons with unbraked rollers. ...
Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal
This rugged diesel forklift with a load capacity of 4,000 kg (8,818 lbs) is the perfect choice for demanding applications in tight storage areas. Equipped with a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it offers excellent manoeuvrability and energy efficiency. In addition, we also have electric, gas and four-wheel drive forklifts in various designs and options such as chassis adjustment, double telescopic mast and ergonomic cab to meet all your special requirements. - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Load capacity: 4000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 130 x 50 mm - Total weight: 5310 kg - Vehicle width: 1410 mm ...
Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg
Diesel forklift 5.0 tons (5,000 kg, 11,023 lbs) is perfect for intensive use in large warehouses and when lifting heavy loads. Equipped with a powerful four-cylinder engine, hydrostatic steering, pneumatic tyres and a high-lift mast, it ensures fast and efficient transport of goods. In addition, we also offer electric forklifts that enable emission-free work in confined spaces, gas forklifts for balanced performance in various applications, and four-wheel drive forklifts that are ideal for outdoor use. Features: - Load capacity: 5000 kg - Engine: Cummins F3.8 - Power: 55 kW / 73.7 hp at 2500 rpm - Torque: 400 Nm at 1300 rpm - Displacement: 3.8 liters - Fuel tank: 140 liters - Emission standards: EU Stage V / EPA Tier 4 - Transmission: 2-2 Powershift - Maximum lifting height: 3000 mm (with standard fork) - Fork dimensions: 1220 x 150 x 55 mm - Total weight: 8160 kg - Vehi ...
Diesel forklift with a load capacity of 6,000 kg (6,000 kg, 13,228 lbs) offers reliable performance, even with heavy loads and challenging working conditions. Thanks to the hydrostatic steering, pneumatic tyres, high-lift equipment and dual-circuit braking systems, the truck remains manoeuvrable and safe even under extreme loads. If you're looking for a more environmentally friendly alternative, we also have electric forklifts for zero-emission operations, gas forklifts for greater flexibility, and four-wheel drive forklifts that are ideal for rugged use on construction sites and rough terrain. Specifications: - Engine: Cummins F3.8 - Power: 55 kW (73.7 hp) at 2500 rpm - Torque: 400 Nm at 1300 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 6000 kg - Max. lifting height (standard fork) ...
Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...
Rough-terrain forklift, which has an impressive load capacity of 2,500 kg, delivers reliable performance even on challenging terrain. With its robust construction and high ground clearance, it effortlessly masters uneven terrain, muddy floors and loose surfaces. Depending on your needs, you can choose the RTM 25 with either two-wheel drive (2WD) for lighter conditions or all-wheel drive (4WD) for maximum traction on difficult terrain. Its efficient motor ensures economical operation and high reliability, even under continuous load. In addition to the RTM 25, we offer a wide range of electric, gas and all-wheel drive forklifts with load capacities from 1 to 10 tonnes. We are always happy to provide you with personal advice. Specifications: - Load capacity: 2500 kg - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission stan ...
Rough terrain forklift combines an impressive load capacity of 3,000 kg with outstanding off-road capability. Thanks to its stable construction and powerful drive, it is perfect for challenging outdoor use. Whether you choose the 2WD variant for paved surfaces or the 4WD version for extreme conditions, the RTM 30 ensures reliable performance on any construction site, in the forest or in agriculture. High efficiency and low fuel consumption round off the overall package. In our extensive range of forklifts, we also offer the RTM 30, in different drive types and load capacities. We look forward to advising you personally! Specifications: - Load capacity: 3000 kg - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Displacement: 2,615 litres - Emission standards: EU Stage V & EPA Tier 4 - Fuel tank: 62 litres - Transmission: 1-1 ...
All-terrain forklift with an impressive load capacity of 3,500 kg, what it can do – it's strong and versatile. Whether you're working on rough jobsite terrain, dirt roads, or demanding outdoor applications, the RTM 35 remains stable and performing. It is available with a choice of 2WD or 4WD, so it can be flexibly adapted to the respective conditions. Thanks to its robust design and efficient drive, it is the perfect partner for heavy loads in outdoor terrain. In addition to the RTM 35, we also offer a wide range of forklifts for different needs. Our experts are at your disposal to advise you. Specifications: - Load capacity: 3500 kg - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standards: EU Stage V and EPA Tier 4 - Displacement: 2,615 litres - Fuel tank: 62 litres - Transmission: 1-1 Powershift - Maximum ...
All-terrain forklift with an impressive load capacity of 3,500 kg, what it can do – it's strong and versatile. Whether you're working on rough jobsite terrain, dirt roads, or demanding outdoor applications, the RTM 35 remains stable and performing. It is available with a choice of 2WD or 4WD, so it can be flexibly adapted to the respective conditions. Thanks to its robust design and efficient drive, it is the perfect partner for heavy loads in outdoor terrain. In addition to the RTM 35, we also offer a wide range of forklifts for different needs. Our experts are at your disposal to advise you. Specifications: - Load capacity: 3500 kg - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standards: EU Stage V and EPA Tier 4 - Displacement: 2,615 litres - Fuel tank: 62 litres - Transmission: 1-1 Powershift - Maximum ...
Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...
PART NUMBER: 7649 Specifications: - inlet width 900mm - inlet height 300mm - shaft width 1030mm - shaft diameter 700mm - knife length 1030mm - number of knives 3pcs - sieve dimensions 70x70mm - 2 toothed pulling shafts at the bottom - lower shaft motor 7.5kW - 2 toothed pulling shafts from above - upper shaft motor 7.5kW - belt feeder - redler with chain belt 5600mm + 10600mm 2.2kW - width of the feeding belt 800mm - main motor 90kW - reverse gear - total dimensions of the machine length/width/height 3300x3100x1700mm - chipper base dimensions 3300x2080x1940mm - feeder / redler dimensions length/width/height 5600x900x1000mm + 10600x1050x1600mm - Base size for the feeding belt 5100x1300x2520mm - total weight about 16000kg ADVANTAGES – made in Germany – a chain conveyor of the redler type, equipped with scrapers – reverse gear – used chipper, very ...
UnitHub is an automatic system for storage and retrieval. Could be used to manage a warehouse of for end users to pick up goods. System was installed, but only used for a short time. Now, it is professionally dismantled, packed and ready to be installed wherever necessary. The Unit Hub and all of the roller conveyors, the electric cabinet, software - everything is included. It could be installed by the original producer and their Installation team. If there are any modifications needed, we can organize it. Don't hesitate to ask. UnitHub can be installed both indoors and outdoors; such as in shopping malls, office buildings, residential complexes, courier and postal branches, and outdoors. The UnitHub has three functions: STORAGE of goods/orders; OUTPUT of orders around the clock; RECEIPT of packages for further shipment. With UnitHub, your customers can conveniently rece ...
maximum number of results exceeded
please refine your search
