k t used for sale

Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)

; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 985

; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534

; Gross weight [kg]: 2960; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 125A, 63A, 32A, 16A, Sockets: (230V) 16A; Water Tank Volume [l]: 1100

Labeling machines fully automatic Krones Etima Solomatic Machine Krones Labeliernaschine Solomatic Chest torso back 3- leimagregate 3- cold glue pump Power 28,000 FL/h Control Siemens S7

Transfo 40 kVA

2 times in stock

clamping width: 200x75 mm : , max. clamping width: 200x120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600

Type Smokehouses Height 2150 Width 1400 mm Length 1150 mm Voltage Electrical: 400V 50Hz 3N Installed Power 13 kw Main material Stainlees Steel Smokegenerator type Detached, woodchips Trolleys per batch 1 pc Standard Trolley (1000 x 1000 x 2000 mm) No Non-standard trolley dimentions 1050 x 900 x 1500 Smokehouse functions: Drying and smoking Smokehouse functions Smoking only Smokehouse function Brewing Smokehouse function Ventilation

; Gross weight [kg]: 4950; Engine: Volvo TAD1642GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 900

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

Description: 5 new transformers Type : OIL transformer Execution : Hermetics Make : Schneider Built: 2016 Condition: New Rated power: 1360 KVA Medium voltage: 11 KV +- 2 x 3.5% Low Voltage: 380 V Solar Transformers Switching group: DYN 11 Frequency: 50 Hz Cooling type : ONAN Total weight: 4345 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . Brp2ucps All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.

; Gross weight [kg]: 2789; Engine: TAD1341GE; Accessories: Tanker, Battery, Control Panel, including: coolant Heater and battery charger; Water Tank Volume [l]: 515

; Gross weight [kg]: 3860; Engine: Volvo TAD1343GE-B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

; Gross weight [kg]: 4520; Engine: Volvo TWD1645GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 897

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 800 mm measuring range X-axis: 520 mm Table dimensions: 700 mm weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Other MAPPS IVB Grinding length [mm] 150 Specifications: Grinding ø (max.) 350 mm Grinding length (max.) 150 mm Grinding wheels-ø 25-180 mm Swivel range grinding headstock (max.) 230° Grinding spindle: Technology internal grinding spindle Speed range 3-20,000 rpm Power (max.) 11 kW Grinding wheel holder HSK-A63 Drilling spindle: Drilling spindle technology Speed range 1,500-3,500 rpm Power (max.) 7.5 kW Tool holder HSK-A63 Workpiece spindle: Technology Direct Drive Clamping surface ø265 mm Table load (max.) 200 kg Workpiece Clamping Pneumatic Chuck General: Travel in X/Z 965/532 mm Rapid traverse in X/Z 24/20 m/mim Equipment/accessories: Direct displacement measuring system (glass scale) in X/Y Chip Management Magnetic Belt Conveyor Coolant management coolant system with paper belt filter and temperature control Workpiece Measurement P ...

; Gross weight [kg]: 3535; Engine: Volvo TAD1342GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 515

Multi Panel, MP370 KEY-12 TFT, 6AV6 542-0DA10-0AX0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

; Gross weight [kg]: 2550; Engine: Volvo TAD840GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 400

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries

; Power [PS]: 489; Gross weight [kg]: 4000; Engine: Volvo TAD1344GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576

working width: 4 m Number of gangs: . 0 Number of folders: 2 0 Number of rollers: 1 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Kracht -Type: TK21/150 -Power: 0.1 kW -Speed: 2800 rpm -Connection: 220/380 volts -Dimensions: 160/240/H340 mm -Weight: 10 kg

SPECIFICATIONS: Sweeping width mm: 600 Complete with: 01 Longitudinal brush 01 Side brush 01 Battery charger As good as new

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Stick electrodes 4.0 x 450 -Type: Phoenix K 50 -Price: per package -Number: 5 packages available -Weight per package: 5.8 kg

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

Electrode welding machine Manufacturer Kemppi Type TYLARC653 Power 650 amps at 35% ED, 545 amps at 60% ED 465 amps at 100% ED Power connection 400 Volt Weight approx. 300kg Machine ready for demonstration under power. Shipping on Euro pallet possible.

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Ex signal isolator, isolated barrier -K series -Product number: 14493S -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC