k t used for sale

Robot KUKA KR6 year 1998 reach 1500mm weight 222kg payload 6kg control KRC2 year 12/2005 weight 185kg software version V5. 5.16 Teachpendant KUKA KCP2 Connection cables 7 m rebuilt by KUKA premium 2012, since the first 427 Hours.

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

Creo Lotem 800 II Quantum 830 nm, Thermal Manufacturer: Creo Model: Lotem 800 Year: 2006 8 page format Plate size min.: 381 x 318 mm Plate size max.: 1050 x 705 mm V speed: 22-25 plates/hour Resolution: up to 3556 dpi Approximate number of plates produced: 109950 Bacher Control 2000 Punch Installed on IBM Server Excellent condition Koadak Mercury 125 PlateProcessor/Stacker

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

Creo Lotem 400, year 2005 830 nm fully automatic thermal imaging plate setter model: Lotem 400 quantum head 4 page format 3 cassette MCU Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 16 plates/hour resolution: up to 2540 dpi approximate number of plates produced: 100950 Bacher control 2000 punch Excellent condition

Spiralkneter KEMPER, type: ECO 125 AE - for approx. 200 kg dough, 125 kg of flour - machine in the bakery - year of manufacture: 10/99 - State: goods - incl. 2 piece stainless steel boiler -El. Supply: 400 V, 50 Hz, 3Ph, 50 A Inspection and test run are possible by arrangement like.

Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Ultrasonic gauge Krohne. Manufacturer: Krohne Type: Reflex radar BM100 A Year of construction: 2004 Voltage: 100/240 V Frequency: 50/60 Hz Maximum pressure: 16 bar Protection class: IP67 These ultrasonic knives were recently removed from a container and are therefore for sale. You are in good condition and fully functional!

KUKA robot KR45-2 Built in 2000 Reach of 2000mm weight 880kg load 45kg good condition KUKA control KRC1 weight 136kg software version V4. 1 7 Teachpendant KUKA KCP1 Connection cables 7 m / 15 m Or with KUKA control KRC2 weight 185kg software version V4. 1.7 Teachpendant KUKA KCP2 Connection cables 7 m / 15 m .

Kippkoch boiler with stirrer elektisch of 80 litres up to 500 litres special size 1000 litres or Dampfbeheizt

Grass collecting container GAH 3060/2 fits Kubota front mower F3060 / F3560. Without turbine!

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

Model: 1240-20-6-4-180 Year of construction: 1996 Capacity: 8000 direction: right machine Feeding: Linear - straight Aggregate: Agg. 1: 6pcs PWL 370, AGG. 2: 4pcs PWL 210 Aggregate self adhesive: 2 x Glue roller: Steel Management: 1 x capsule infeed star orientation, 1 x outlet star Voltage 230/400 V Etikettenl: Hull, back Machine dimensions: B = 2, 90 m, L = 2, 70m, H = 2, 40 m

Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.

Kilia vacuum bowl cutter, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, knife head, hydraulic loading device, hydraulic unloader

1 piece robot KUKA KR60-2 Built in 2003 Reach 2000mm weight 880kg load capacity 60kg control KRC2 weight 185kg software version V4. 1 7 Teachpendant KUKA KCP2 Connection cables 7 m.

1 piece robot KUKA KR30-2 Built in 2000 Reach 2000mm weight 880kg load capacity 30kg control KRC1 or also KRC2 weight 136kg / 185kg software version V4. 1 7 Teachpendant KUKA KCP1/KCP2 Connection cables 7 m / 15 m .

1 piece robot KUKA KR16-2 Mint Year 2011 reach 1611mm weight 235kg payload 16kg control KRC4 Weight 141kg Teachpendant KUKA touchpad KCP4 Connection cables 7 m .