k t used for sale

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 80 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 1700 liters, filter area 130m2, dimensions 8500 x 1700 x 1800 mm, weight 11 to, motor, drip sheet, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 50 plates, closed outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 520 liters, filter area 522, dimensions 5000 x 1400 x 1500 mm, weight5000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

used, kpl. 1 year warranty, plate size 800 x 800 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 460 liters, filter area 36m2, dimensions 3500 x 1200 x 1500 mm, weight 4000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm,25 plates, closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 200 liters, filter area 16m2, dimensions 3000 x 1200 x 1200 mm, weight 1.5 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

15.00 l / h

used, kpl. 1 year warranty, plate size 800 x 800 mm, 40 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 416 liters, filter area 42m2, dimensions 5000 x 1400 x 1600 mm, weight 5.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 600 liters, filter area 48m2, dimensions 5500 x 1400 x 1600 mm, weight 5.8 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Table dimensions: 850 x 300 mm. abrasive belt width: 150 mm. abrasive belt length: 2510 mm. abrasive band speed of 16 m/s. Ver ? laipsn suportas angle is 90. Engine power: 2.1 kW. Stakl ? weight: 148 kg. Made In Austria.

Used Cummins engine KTA50M2 Building year 1998

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 100 plates, closed outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 1850 liters, filter area 224m2, dimensions 9500 x 1600 x 2300 mm, weight 18,000 kg, motor, automatic hydraulics. Plate transport, with or without filter cloths

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 80 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2400 liters, filter area 185m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

We offer from stock Zeven: DEUTZ F6-8L 613 cylinder heads completely with valves + spring newly assembled. MIW GmbH Motoen-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven / Germany Phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.MIW-ZEVEN

; ready for operation

; NEW

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

; NEW

Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

Robot KUKA KR125/150/200 manufacture date 1996/1998 reach 2400mm, weight: 975kg / 1025kg payload 125, 150 and 200kg controller type VKRC1 (VW/Audi version) weight 136kg software version 3.3.3 SP06 RAM amount SD RAM 64MB KCP/VGA/1.0 Grafic Board Language Windows95 Teachpendant Kuka VKCP1 Cable length 7m larger quantities available, preferred selling in large quantities.

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Robot Kuka KR180 Serie2000 manufacture date 2002 reach 2700mm weight 1245kg payload 180kg controller type VKRC2 (VW/Audi version) weight 185kg software version 4.1.7 SP08 RAM amount of SD-RAM 128MB KCP/VGA/2.0 Grafic Board Language Windows95 Teachpendant Kuka VKCP2 Cable length 7m sale in large quantities preferred.

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

inlinescanner for Richard Wolf Piezolith

According to the description below

; ready

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Water distillation plant for water for injection according to the pharmacopoeia. Power up to 2,200 l / h

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Pocket filter with 15 m2 filter area, cleaning via vibrating motor with 0.25 kW. Designed as a silo attachment or vent filter for overpressure silos, including many new parts. Can be retrofitted with exhaust fan (0.75 - 2.2 kW), stand feet and dust collection tank to stand filter / add-on filter.