k t used for sale

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to

Belt width: 600 mm, Direction: 90 degrees right hand side, Radius: 1150 mm, Power: 3 x 380V, 50Hz, 0.18kW

-Boiler lifter Kemper HK200 RD -for Werner & Pfleiderer DK250 kneading kettle -with boiler drive and boiler scraper

For sale: Hyundai-Kia cnc lathe type SKT300MS. This machine is equipped with a Fanuc 21i TB control. De machine has a main and sub spindle. The chuck size on the subspindle is 300 mm with a bar capacity from 90 mm. The chuck size on the sub spindle is 8 inch (210 mm). Maximum turning diameter is 500mm, maximum turning length is 680 mm. The machine is equipped with a 12 position revolver with BMT-65 toolholders. All toolholders are included. Inclusive 4 pieces rotary toolholders. The machine has a toolsetter,parts catcher and a chip conveyor with right side discharge. On stock for sale

Kitagawa B-208 Three-jaw chuck, new/ undelivered in the packaging

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   total power consumption: 140 kW   mains power supply: 145 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2540 mm   space requirements -front/back-: 5000 mm   total height: 2840 mm   total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min

- Station is connected and was in operation at a CHP plant - Went into operation in 2014 - AVACON grid area - has been serviced via maintenance contract from AVACON -

Kawasaki Gas Turbine Cogeneration Power Plant 34 MW / 60 Hz This modern 34 MW Kawasaki L30A Gas Turbine Power Plant is a highly efficient and environmentally friendly cogeneration facility designed for industrial and utility-scale power generation. Manufactured in 2020 and maintained in excellent condition, the plant combines reliable electrical generation with heat recovery, achieving total fuel utilization efficiency of up to 85.5%. Operation was stopped on Stopped in March 2024 in good condition and the plant was preserved with KHI’s maintenance instructions. The plant is powered by a Kawasaki L30A two-shaft industrial gas turbine featuring a 14-stage axial-flow compressor, advanced Dry Low Emission (DLE) combustion system and high-efficiency turbine technology. The unit delivers approximately 34 MW electrical output with thermal efficiency exceeding 41%, while maintaining exce ...

Krämer + Grebe cutter, type: SM 45, serial number: 258/281 1, s/s bowl, volume: 45 liter, dimensions: 1300 mm x 1000 mm x 1250 mm.

IMEFY Cast Resin Dry-Type Transformer 1000 kVA with Siemens Control Cabinet Manufacturer: Imefy Power: 1000 kVA Type: Cast resin dry-type transformer Condition: used, functional Location: Pforzheim

- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 46500 l, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control

Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated., Additional title: coolable, insulated, clad, Gross content: 1122 l, Perm. working overpressure: 3 bar, Perm. working temperature: 20 °C, Content cooling zone: 5 l, Length: 1000 mm, Width: 1000 mm, Height: 1700 mm, Material: stainless steel, Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Pressure tank with two dished heads, central outlet and manhole., Additional title: vertical pressure tank, Volume: 5090 l, Working pressure: 2 bar, Width: 1500 mm, Height: 3780 mm, Weight: 700 kg

Storage tanks with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: Vertical, coolable stainless steel tanks, Gross volume: 8300 l, Operating pressure: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping

Fermentation tank with two dished bottoms. - 4 tanks with 52 hl butto content each - 2 tanks with 79 hl gross capacity each, Additional title: vertical stainless steel tanks, Total volume: 7900 l storage tank 2 pcs., Operating pressure each: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1400 mm, Height: approx. 4100 mm, Material: Stainless steel 1.4310, Position: vertical, Base construction: 4 x pipe feet, height-adjustable, Features: Side manway; CIP piping; outlet valve (butterfly valve)

This vertical tank from König und Günther is a robust and reliable solution for storing liquids in breweries or beverage production facilities. With a capacity of 50 hl, it is designed for optimal use of space in a vertical position. The tank has a stable construction on three feet, a width of 1.5 m, a height of 3.7 m, and a weight of 300 kg. Its solid construction ensures safe and long-lasting operation and makes it suitable for a wide range of process applications. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: vertical stainless steel tank, Capacity: 5000 l, Width: 1.5 m, Height: 3.7 m, Weight: 300 kg, Position: vertical, Base construction: on 3 feet

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel agitator tank, Capacity: 50000 l, Length: ca. 3,2 m, Width: ca. 3,2 m, Material: Stainless steel, Position: Vertical, Features: Agitator

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical agitator tank from stainless steel, Capacity: 100000 l, Material: Stainless steel, Position: Vertical, Features: Agitator

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical

Bioreactor with pH, oxygen and temperature measurement. Membrane aerators are also included., Additional title: Vertical stainless steel tank with membrane ventilators and pump system, Capacity: 240 m³, Width: 7,1 m, Material: Stainless steel, Position: vertical, Features: Membrane aerators; pH measurement; oxygen measurement; temperature measurement; pump station inlet

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel tank with agitator, Capacity: 70000 l, Length: appr. 3,8 m, Width: appr. 3,8 m, Material: Stainless steel, Position: Vertical, Features: Outlet pump 2,2 kW, (flow rate 19m3/h); Agitator

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Conveyor belts for PETCYCLE crates, consisting of motorised conveyor belts and gravity roller conveyors. Length approx. 70 m, Additional title: Crate transport routes, Capacity: 4000 crates/h, Formats: Petcycle box for 20 x 0.5 l, 9 x 1.0 l, 6 x 1.0 l and 6 x 1.5 l PET bottles, Operation / Control: Control panel / Siemens S7-300, Material: Mainly stainless steel, Position: Free-standing, Features: Hinge belt conveyors, roller conveyors, conveyor frames, drives, substructure, drip tray, control system

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

rotary table diameter: 600 mm boring diameter: 600 mm drilling depth: mm grinding height: 450 mm grinding head - power requirement: kW control: Siemens Sinumerik 840 C total power requirement: 30 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 8-22 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 155 mm output - pieces/min 105 press power 250 to

bushing cut-off , PKO , IFO diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 280 mm shaft length under head 220(260) mm output - pieces/min 40-75 press power 100 t

Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1 ...

Used combi KRONES contiform S8 + mecafill triblockTechnical Specifications & Performance DataThis rotary blow-fill-cap monoblock is engineered for high-quality PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Designed for industrial packaging environments and suitable for integration into a used bottling line or as a second hand standalone system, it combines precision, reliability, and reduced footprint.Manufacturer: KronesModel configuration: Contiform S8 + Mecafill (integrated tri-bloc)Year of manufacture: 2004Maximum speed: up to 12,800 bottles per hourContainer material: PETCurrent bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum bottle height: 350 mmRotation/direct ...

Overview  The swing top closing machine was built in 2000 by the German manufacturer Kleindienst. The machine was continuously maintained and is already dismantled and stored. Technical data  Capacity: 18,000 bottles/h  Number of closing heads: 24 Formats: 0,5 l Bügel Lochmund 0,33 l Bügel Kropfhals  Working direction: clockwise

A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible.

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

measuring range X-axis:-50 . 530/830/1030 mm measurement range Z =:605/805/1005 mm tool taper:30 & 40 VDI compressed air:6 bar dimensions:2200 x 1200 x 2100 m machine weight ab.:900 kg Vertical Toolsetter with Cutting Edge detection via Camera System. Operating over CNC Control yb PC System or Manually, 3 axes, CNC Equipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axis and Linear Roller bearing in all Axis of the Slide Carriage. Electronic measuring equipment: PC electronics with intelligent KELCH EasyVision image processing 17" TFT colour monitor Optional: second 17" TFT monitor for full screen measuring window The CNC Toolsetter is in good condition and ready for immediate use.

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

Keyence Digital Measuring Projector ? Model XM-1600 General: Digital measuring projector with a high resolution image measurement system and very easy operation. Place the part on the stage and measure by pressing a button. Supports automated measurements of up to 300 dimensions within seconds. Measuring Head / Control Unit: ·Sensor: Monochrome CMOS 1 inch, 20 megapixels ·Display: 12.1 inch LCD monitor (WXGA 1280 x 800) ·Lens: Double telecentric lens Measuring Field and Measuring Range: ·Standard measuring field: approx. 100 mm diameter ·Precision mode measuring field: approx. 25 x 25 mm Measurement Accuracy and Repeatability: ·Display resolution: 0.1 micrometer ·Repeatability (standard, without stage movement): approx. plus minus 1 micrometer ·Precision mode (without stage movement): approx. plus minus 0.5 micrometer Stage / Travel Axes: ·XY measuring stage: motorized ·Z axis ...

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min. distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm,  ...

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

<br>UP: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOLIE: 30-100 MIKRON<br><br>Still in operation: No<br>Verf Gbar: immediately

R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately

Working width 1000 mm Still in operation: Yes Available: immediately