k t used for sale

x-travel: 12000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 415 taper ISO: 50 P.D.B. spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA KR 210 L150-2 2000 6-axis robot The KUKA KR 210 L150-2 2000 (2000 series) is a powerful 6-axis industrial robot that has been specially designed for an extended reach with a high payload. The abbreviation "L150" signals the arm extension (long version), which raises the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Main technical data Maximum reach: 3,100 mm Nominal load capacity: 150 kg Additional load (arm/swingarm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Net weight (without steering): approx. 1,285 kg Degree of protection: IP65 (standard) Mounting Position: Floor Axis data (range of motion & speed) The 2000 series is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): + ...

Spray nozzle KREMLIN TETE N23 V Dimensions: 41 x 41 x 33 mm Minimum order value 50,- €

Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Working pressure HD: max 25 bar Rated voltage: 230 V 1AC 50 Hz Rated current: 3,3,00 65 A ambient temperature: 5 - 43 °C oil - water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil-water separator ): 360 x 230 x 530 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 920 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 1020 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

width: 500 mm height: 300 mm depth: 570 mm CNC-Table Attachment Frame Producer: KOCEL Type: 2755 YOM: new Width: 500 mm Depth: 570 mm Height: 300 mm Weight: ca. 9 kg Number of CNC-tool holder slots: 16 Colour: RAL 5015 blue Additional information: - Patented, innovative universal-plug-in system: - Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past. • The frame is a solid steel-sheet metal construction and was welded firmly No Tool Holders included! The data for this ad was created with ModulMWS - the software solution of Log ...

faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts

DTG PRINTER Kornit storm HD6 YEAR 2017 MADE IN ISRAEL EQUIPMENT: TEXTILE DIGITAL PRINTER MODEL: STORM HEXA SERIES LOCATION: (Mexico City) Specifications DTG T-Shirt Printing Machine Prints one t-shirt in approximately 40 to 60 seconds Features 2 pallets for nearly simultaneous printing Equipped with 2 control monitors Requires a two-phase plug Initial setup assistance for printing Does not come with inks or spare parts Printing time per t-shirt: 60 to 90 seconds Is already packed and stored Find more here - / Contact us at -

Calender consisting of: (Version: 2024-02) Manufacturer: Eduard Küsters Maschinenfabrik_Krefeld Thermobonding calender, type 413.50 YOC: 1985 Nominal width: 3700 mm Fabric width: 3500 mm / conversion to 3200 mm Total force: 555 kN Line force: 150 N/mm Production speed: 10-150 m/min Roller Equipment: 1 Küsters floating roller (S-roller) 1 Raculan 1 steel roller Non-binding information from the manufacturer. Technical documentation and electrical documents available Special feature: Heat exchanger included in scope of delivery. Electric heater no longer active, therefore conversion to heating via external thermal oil system (not included). Sale: as seen, without further warranty Condition: ready for use Find more here - / Contact us at -

1984 Messer Griesheim Statosec KSP 4000 CNC Blow Cutting Torch: Technical Condition: operational Manual: Attached Specifications: Technical data: Fuel: acetylene or propane gas Number of burners: 4 (programmable 1 burner) Sheet thickness: 8 - 200 mm. Sheet dimensions: 3000 x 6000 mm. The burners are driven by a steel belt. Space requirement: 4900 mm wide 9400 mm long 5000 mm high High speed: 6000 mm/min. Cutting speed: 10 - 1000 mm/min. Drives: DC servo motors Programme control: Burny 10 LCD plus Programmable on the machine tool and has a programming workstation. workstation. Programme: Burny 10 OEM Plus Year of manufacture: 1984. Find more here - / Contact us at -

: 3000 kg length: 2500 mm width: 1250 mm height: 510 mm : lenkbar : lenkbar gear diameter: 400 mm weight of the machine ca.: 0,33 t dimensions of the machine ca.: 3000 x 1250 x mm Heavy-duty trailer - Double steering - Drawbar can be switched The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X / Y / Z = 400 x 300 x 350 mm Feeds in the 3 axes Rapid traverse in 2 axes ISO 40

X / Y / Z = 320 x 180 x 300 mm Feed in 3 axes Stepless feed Digital display 3 axes

The high-precision container sorter , Height, colour, contour, neck or closure: Whatever the characteristic features of your containers, Sekamat recognises them and unerringly rejects all the others. The control is contactless via camera. Possible sorting criteria: Container contour Diameter Container height Muzzle contour Color Presence of the shutter Additional detection units for: Label color Partially filled containers ACL Closure color uwemetzlerdingslebener

Compressed air tank 5.3 m³, operating pressure 7 bar

Centrax Gas Turbine-Generator Package - (USED) 50Hz Fuel Description Bio Gas Only Unit type M2000 KB5S Running hours 126701 Starts 2950 Megawatt hours 349558.0 mwhr Turbine speed 14580 RPM inspection report available

turning diameter: 500 mm turning length: 1500 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Efficient and space-saving wraparound carton packaging Manufacturer: Kettner (Krones), modernized by Hormes Type: Wrapapack Output: Up to 18 cycles/min. Format: 6 x 4 bottles (0.33 l) Efficient wraparound carton packaging for the beverage industry The Kettner (Krones) Wrapapack carton packaging machine, modernised by Hormes, offers a reliable and high-performance solution for packaging bottles in wraparound cartons. With an output of up to 18 cycles per minute, this machine is ideal for beverage manufacturers looking for efficient and economical packaging processes.

faceplate diameter: 3300 mm swing diameter: 4000 mm turning height: 3050 mm workpiece weight: 25 t faceplate turning speed range: 8 - 40 U/min ram swivable +/-: 30 ° main drive motor: 55 kW Control: Heidenhain TNC 640 total power requirement: ca. 85 kW weight of the machine ca.: 85 t dimensions of the machine ca.: 8,0 x 7,7 x 6,7 m Conversion and modernisation in 2024 equipped with: - CNC control Heidenhain TNC 640 & Handwheel - 2 swivelling ram supports (1x CNC controlled) - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

various Rolling Tools for Jupiter Baking Machines - Condition: used - for different angles and Wafer Lengths

Technical data: Type : Casting resin transformer Finish : Dry Make : ABB Year of construction : 2000 Condition : Used Rated power : 1250 KVA Medium voltage : 10 KV Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type :AN Gross vehicle weight : 3090 kg Nationwide delivery included.

propulsion: 0,75 kw motor wihtout brake 1380 r/min description: with pusher and modular belt availability: immediatelly Installation dimension: 1405 x 1120 x 200 mm Usable width: 500 mm transport size: 1550 x 1200 x 1300 mm weight (m) [kg]: ca. 250 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-si ...

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly

Manufacturer: Perske Fräsmotor, Type: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, Iso/kl: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: yes, machine ready for demonstration: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Manufacturer: Mehanika, Type: 2 Stück Kettentransportsystem Kappanlage, Year: 2009, Working length mm: 450-3100, Working widht mm: 3100, Feeding speed min-max m/min: 30, Year :2009

A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible.

Manufacturer: Bauholz Kreissäge, Adjustment paralell guide: ahnd, Diamete saw blade max mm: ca.500, Engine main saw kW: ca.5-7, Saw blade speed rpm:: 4500, Hight adjustment saw blade: yes, Table extension - lenght: yes, Hight adjustment saw blade: yes, Saw blade tiltable: yes 45 Grad, FREE TEXT: Rollbar,

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mm length:75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

tool taper:50 weight:0,04 t

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw , Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

length:610 mm width:500 mm height:1800 mm weight - pallet system:30 kg

Manufacturer: Perske Fräsmotor mit Nutenstein Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

max. grinding diameter:50 mm grinding length:250 mm workpiece length:300 mm total power requirement:0,7 kW weight of the machine ca.:330 kg dimensions of the machine ca.:1000 x 1000 x 1400 mm

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Nottmeyer, Type: Kommet Super SB, Year: 1988, Work bays: 1, Throuh running machine: yes, Working range X: 2600, Working range Y-axis: 800, Drilling support horizontal: 2, Drilling supprt from bottom: 5, Drill support from top: no, Belt conveyor: yes, Grid 32 mm: yes, Horizontal drilling from both sides: yes, FREE TEXT: ink. Bohrgetriebe , Year :1988

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...