k t used for sale

Knapp transfer roller conveyor Toothed belt slider 90° 750-510-450 RA1875 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 55 & 90 mm Angle between roller conveyors: 15° Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 420 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: nominal voltage: 24V, 380-500V condition: very good (used) angle: Winkel zweite Bahn 15° Conveying length in mm: 750 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 55, 90 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor s ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: ...

Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 675 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s: bis 1,25m/s scope of delivery: inklusive Pneumatische Ventile und Zylinder, including supports For i ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides Features: nominal voltage: 24V, 380-500V condition: very good (used) Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s ...

100 detachable towbars Kia Sportage, new, from model year 2015, without E-set for orders of 10 pieces: Price per piece 50,00 € plus VAT VAT

70 pieces of detachable towbars without E-set Kia Ceed from model year 2015 for orders of 10 pieces: Price per piece € 50.00 plus VAT

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Automatic Vial or Ampoule Leak Detection Machine Bosch KLD1042 Year of construction: 2008 Diameter of ampoules min./max.: 10 - 32 mm Speed: 24,000 ampoules/hour up to Ø 13 mm (3ml ampoule) 18,000 ampoules/hour up to Ø 18 mm (5ml ampoule or 4R vial)

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Schleicher -Type: KZT11 -Number: 2x relays available -Price: per piece -Weight: 0.1 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h Price: per piece -Quantity: 3 available -Weight: 0.2 kg

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s Price: per piece -Quantity: 5 available -Weight: 0.2 kg

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Remaining: With fold-out parts Weight: 0,025 tons Length mm: 1900 Width mm: 500 Height mm: 1000 Working height: 100 cm Transport size L x W x H: 1,3 x 0,5 x 1,0 Min.-max glass size: 160 x 50 Condition machine : mediocre Missing parts: Wheel - For more information, please mail us: salestecfort.nl

Gears, spur gears, bevel gears, worm gears -Manufacturer: Himmel, gearbox type DF41 - KQ60 - (Q60) -Translation: i 18.93 -Drive shaft: Ø 30 x 60 mm -Hollow shaft: see photos -Ma: 330 Nm -Dimensions: 375/200/H225 mm -Weight: 27.3 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Toggle dowels, anchor hooks -Manufacturer: Würth, tilt dowel -Type: W-KDW M10 x 180 -Condition: according to pictures without tilting plate -Quantity: 11 pieces available -Price: per piece/minimum order 5 pieces -Weight: 0.1 kg/pc.

Adapter for tool presetters The adapter is plugged into the SK50 basic holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

Gears, spur gears, bevel gears, worm gears -Manufacturer: Stöber, gearbox type K813AG0420SD132S4 -Translation: i = 42.495 -Hollow shaft: Ø 70 x 260 mm -Drive wheel: helical -Bolt circle: Ø 215 mm M12 -M2 perm: 1482 Nm / n1= 1440 rpm n2= 33.9 rpm -Dimensions: 420/290/H410 mm -Weight: 125 kg

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4750+800 Nominal / outside width in mm: 885 Belt width in mm: 750 Driven: ...

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

Equipment: Precision Six-Jaw Chuck 1. Cylindrical grinding device Partial Setup Coolant system Instruction manual

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 182 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

Used freezer cell KOMA, type: - Large freezer cell for 55 to 60 rack trolleys - down to -25°C - Cooling capacity: 25.1 kW - Condition: very good - Location: Germany Viewing possible on request.

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Stack height: max. 1.20 m Equipment: Standard, vibration and blow function

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter intermediate sleeve reducing sleeve SK40 MK1 M16 -Type: 40 x 1 Dimensions: 60/55/H178 mm -Weight: 0.9 kg

Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Manufacturer: Krieg, table trolley with 4 shelves -Load capacity: kg -Chassis: 4 swivel castors -Dimensions: 1200/700/H1210 mm -Weight: 62 kg

Transport trolley, platform trolley, transport trolley, table trolley, assembly trolley -Manufacturer: Krieg, trolley table with 3 shelves -Load capacity: kg -Chassis: 2 swivel casters, 2 fixed casters -Dimensions: 1000/600/H1210 mm -Weight: 43 kg

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Key data: 560 mm, 1200 mm, 380 mm

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m

Shelf tray, drip tray, floor tray, pallet tray, drip container, drip pallet -Manufacturer: Bauer, steel collecting tray, small container tray type KGW2 LB galvanized -Collecting volume: 25 liters -Material: S235JR sheet steel, galvanized, thickness 3 -Dimensions: 940/470/H60 mm -Weight: 21.5 kg

Tool trolley -SK50 recordings: 10 pieces -Tool trolley: with 5 plastic handles -various cutter heads -various roller milling cutters

ball valve, ball valve internal thread, metal ball valve -Manufacturer: Pekos, 2/2-way metal ball valve stainless steel unused -Type: K806 SGSGV -Size: 1 -Number: 4x ball valve available -Price: per piece -Dimensions: 235/80/H140 mm -Weight: 3.2 kg/piece

Tires, solid rubber tires, forklift tires -Manufacturer: Kumaneko, solid rubber tires, 2 pieces with rim -Type: Widewall -Tire size: 27x10-12 -Bolt circle: Ø 220 x 27 mm -Recess: Ø 160 mm -Price/Sale: complete -Dimensions: Ø 600 x 255 mm/pc. -Total weight: 158 kg

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

trolley -Simple bucket -Flat press -2x shelves for microfiber mops

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Ingredient Cart with 9 ingredient trays Stainless steel with 4 swivel castors External dimensions approx.: 670 x 500 x 1770 mm Tub size approx.: 600 x 430 mm Used appliance cleaned Many more devices in stock!