128,237 used machines on RESALE, but how to find them? Machine Search
White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...
Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...
Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
Displacement 3.33 ltr., power 55 kw/74 hp 36/36 speed manual transmission with hydraulic reversing gear and powershift stage Vmax 40 km/h All-wheel drive can be switched on, automatically engaged during braking, Differential lock both axles (front self-locking) Front power lift FOLGER Cat. II + + ports dw Hydraulic connections 3 x dw at the rear Tyres 320/85 R20 AS (12.4 R20 glue) front, co-steering fenders Tyres 420/85 R30 AS (16.9 R30 glue) rear Rotating 6 work lights, auxiliary main headlights for winter service use Air-sprung Grammer Comfort driver's seat with armrests Air conditioning, Recirculation, Radio, Passenger seat PTO 540/540E, speed accumulator, with external switch on the rear fender Rear power lift Cat. II with high-speed hooks, Automatic pull mouth, height adjustable in grid rail Glass roof cabin with sun visor, interior spies, exterior mirrors ca ...
Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm
nett cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) steam heated max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed
Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr
Drehschiebervakuumpumpe-dry running Manufacturer: Becker Type: KVT 3.140 Engine: 400V/50 Hz Suction capacity: 140 m ³/h Discharge pressure: 100mbar (ABS) corresponds to 90% vacuum Status: Rebuilt Accessories: vacuum filter installed; Operating instructions Further details or technical assistance like via request; ready for operation
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes
Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg
GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...
<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 900mm Total width: 1030 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of straps: 4 PCs. <b>Tailor-made solutions for your intralogistics</b> We are ...
<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor Number: 4 PCs. 2 STK. with partial engine 2 PCs with engine under the conveyor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 720mm Total width: 1040 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of belts: 2 P ...
1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de
Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;
Machine Type: SK50 Mandrel Manufacturer: KYUSHUKOGU Type: SK50 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 178,50 Euro incl. VAT and shipping within Germany. Location Warstein , Germany Reference MZ-WER-1223-1 DESCRIPTION We offer you a used alignment mandrel, see pictures. Technical data will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm
Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm
A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.
-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile
We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C
Kawasaki M7A-03D 7.2MW Natural Gas Turbine Complete CHP Generating Set Completely self-contained Kawasaki M7A-03D 7.2MW Gas Turbine and Generator package with Heat Recovery (Thermic Fluid Heater and HRSG Hot Water Generator) in acoustic enclosure. Runs parallel with grid. Island operation mode. Make and Model: Kawasaki TD80A Capacity: 7200kW Hrs: 10,000 V: 11,000 HZ: 50 Year: 2010 Fuel: Natural Gas Scope of supply : Gas Turbine GPB 80, M7A-03 DLE Single Gas Fuel, single shaft with DLE Combustor, reduction gear box, coupling with guard, Diaphragm Type, Generator (TD80A, 2011) Heat Recovery System - Thermic Fluid Heater, HRSG Hot Water Generator Acoustic Canopy with Lighting Control and Instrumentation Exhaust collector and/or diffuser, Gas Fuel system, Lube oil system, Inlet ducting, Inlet filtration system, Inlet silencer, Combustion system, Protection syste ...
Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts
25 Schäfer cantilever rack double-sided upright 6.5 m Used goods, good condition, see pictures Height 6.5 m (IPE300) Arm length 100 cm (IPE100) 1000 kg load per boom Column load 7000 kg Wheelbase 100 cm Frame grey (RAL5010), strap blue 8 outriggers per upright Negotiation price: € 990,-- net from stock per upright Art.Nr.: P10262 Also available as a double-sided cantilever rack. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.
Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers
Universal - Swivel - Tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The Universal - Swivel - Tilting Table is in good condition
Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...
Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer
Technical characteristics: Rated power: 2000 kVA Primary voltage (HV): 20,000 V Secondary voltage (LV): 400 V Adjustment positions: 1: 21,000 V 2: 20,600 V 3: 20,000 V 4: 19,400 V 5: 19,000 V Frequency: 50 Hz Phases: 3Isolation level: HV: 125 kV / AC 10 LV: AC 10 Cooling: KNAN Service Plan: Ongoing Connections: Connection diagram: Dyn11yn11 Output voltage: 400 V – 50 Hz Multiple Connection (Low Voltage): 1W, 1V, 1U / 2W, 2V, 2U Short-circuit current: 5.83 kA Short-circuit impedance: 6.1% Cooling & dielectric: Dielectric Fluid Type: MIDEL 7131 No-load loss rate: 1873.1 W Load Drop Rate: 15.1 kW Location :p aris Condition: Very good condition – Tested and ready-to-use hardware Disassembly and transport possible on request
Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.
Number of drill units 7 Number of tapping units 4 Number of clamps 8
Transport chain for scraper belt conveyors 450 K-3, 8,80m lang, Knoll, new -70% We have set a very low price! If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - For scraper belt conveyor Fa. Knoll 450 K-3 - The chain has 140 links and is therefore approx. 8.8m long - Chain link length 63mm, - Roll diameter 40 mm, - Clear width between the chains approx. 345mm - appr. 350 kg
Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg
Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm
Platform diameter 2,800 mm Max turnerable diameter 3,200 mm Maximum height of the workpiece 1,600 mm Weight allowed above platform 16,000 kg Main engine power platform 55 kW Spindle RPM 1.25-63 Spindle No. Crossbar stroke 1,240 mm Horizontal head stroke 1,720 mm Vertical head stroke 1,200 mm Total machine weight 43 ton
Plug 1 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2002 Power: 1250 kVA HV voltage: 5775/5500/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU Total weight: 2665 kg Condition: Good condition sold as is, with no warranty. Plug 2 – 1600 kVA Transformer Manufacturer: Pauwels France Year: 2004 Power: 1600 kVA HV voltage: 5750/5500/5225 V LV voltage : 2253.07 V LV Current: 167.96 A Cooling: ONAN Insulation: OIL Winding: Total mass: 3200 kg Condition: Good condition, sold as is, no warranty. Plug 3 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2004 Power: 1250 kVA HV voltage: 5775/5637/5500/5362/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU ...
to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim
High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 30 ro ...
Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:
weight max.: 100 t clamping width: 9500 mm height: 990 mm Width: 300 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brüel & Kjær Vibration Testing System 4812 + 4801 Shaker Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonant frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm max • Acceleration limit: 981 m/s² • Bolt Torque Limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard anodized aluminum Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Installation height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the or ...
x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...
maximum number of results exceeded
please refine your search
