k t used for sale

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

PTO generator with AVR and IP45 --> This PTO unit is available in the power classes 22 - 80 kVA. List with prices can be found at the bottom of the text. - - - - - - Available models: 22 kVA, 33 kVA, 50 kVA, 66 kVA, 80 kVA - Manufacturer: Green Power (Italy) - - - - - Description: - PTO generator - Manufacturer: Green Power (Italy) - Generator brand: MeccAlte (Italy) - 22 kVA / 33 kVA / 50 kVA / 66 kVA / 80 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - Speed 1500 rpm. - Protection class: IP45 - AVR ESC - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Sockets: - 1x 230 volts - 1x 400 volts - - - - - House - Field - Panel --> The "House Field Panel" shown in the photos can be ordered for an extra charge The panel includes the following extras: - Switcher between home opera ...

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Schleicher -Type: KZT11 -Number: 2x relays available -Price: per piece -Weight: 0.1 kg

Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h Price: per piece -Quantity: 3 available -Weight: 0.2 kg

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s Price: per piece -Quantity: 5 available -Weight: 0.2 kg

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Himmel, gearbox type DF41 - KQ60 - (Q60) -Translation: i 18.93 -Drive shaft: Ø 30 x 60 mm -Hollow shaft: see photos -Ma: 330 Nm -Dimensions: 375/200/H225 mm -Weight: 27.3 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Toggle dowels, anchor hooks -Manufacturer: Würth, tilt dowel -Type: W-KDW M10 x 180 -Condition: according to pictures without tilting plate -Quantity: 11 pieces available -Price: per piece/minimum order 5 pieces -Weight: 0.1 kg/pc.

Hubkneter, Fabr. Kemper Type F 50 SL

Gears, spur gears, bevel gears, worm gears -Manufacturer: Stöber, gearbox type K813AG0420SD132S4 -Translation: i = 42.495 -Hollow shaft: Ø 70 x 260 mm -Drive wheel: helical -Bolt circle: Ø 215 mm M12 -M2 perm: 1482 Nm / n1= 1440 rpm n2= 33.9 rpm -Dimensions: 420/290/H410 mm -Weight: 125 kg

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 182 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

Corner transfer pallet transport, overhauled 1400x1400 as well as other transport segments, turning segments, corner converters various manufacturers on request overhauled on request

Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2013 condition: good (used) Conveying length in mm: 3350 Nominal / outside width in mm: 720 Belt width in mm: 620 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including supports and side guides For indivi ...

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter intermediate sleeve reducing sleeve SK40 MK1 M16 -Type: 40 x 1 Dimensions: 60/55/H178 mm -Weight: 0.9 kg

Knapp transfer roller conveyor Toothed belt slider 90° 750-510-450 RA1875 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 55 & 90 mm Angle between roller conveyors: 15° Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 420 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: nominal voltage: 24V, 380-500V condition: very good (used) angle: Winkel zweite Bahn 15° Conveying length in mm: 750 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 55, 90 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor s ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: ...

Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 675 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s: bis 1,25m/s scope of delivery: inklusive Pneumatische Ventile und Zylinder, including supports For i ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides Features: nominal voltage: 24V, 380-500V condition: very good (used) Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s ...

Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Manufacturer: Krieg, table trolley with 4 shelves -Load capacity: kg -Chassis: 4 swivel castors -Dimensions: 1200/700/H1210 mm -Weight: 62 kg

Transport trolley, platform trolley, transport trolley, table trolley, assembly trolley -Manufacturer: Krieg, trolley table with 3 shelves -Load capacity: kg -Chassis: 2 swivel casters, 2 fixed casters -Dimensions: 1000/600/H1210 mm -Weight: 43 kg

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Shelf tray, drip tray, floor tray, pallet tray, drip container, drip pallet -Manufacturer: Bauer, steel collecting tray, small container tray type KGW2 LB galvanized -Collecting volume: 25 liters -Material: S235JR sheet steel, galvanized, thickness 3 -Dimensions: 940/470/H60 mm -Weight: 21.5 kg

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

ball valve, ball valve internal thread, metal ball valve -Manufacturer: Pekos, 2/2-way metal ball valve stainless steel unused -Type: K806 SGSGV -Size: 1 -Number: 4x ball valve available -Price: per piece -Dimensions: 235/80/H140 mm -Weight: 3.2 kg/piece

Tires, solid rubber tires, forklift tires -Manufacturer: Kumaneko, solid rubber tires, 2 pieces with rim -Type: Widewall -Tire size: 27x10-12 -Bolt circle: Ø 220 x 27 mm -Recess: Ø 160 mm -Price/Sale: complete -Dimensions: Ø 600 x 255 mm/pc. -Total weight: 158 kg

7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V

trolley -Simple bucket -Flat press -2x shelves for microfiber mops

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Remaining: With fold-out parts Weight: 0,025 tons Length mm: 1900 Width mm: 500 Height mm: 1000 Working height: 100 cm Transport size L x W x H: 1,3 x 0,5 x 1,0 Min.-max glass size: 160 x 50 Condition machine : mediocre Missing parts: Wheel - For more information, please mail us: salestecfort.nl

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Lifting kneader, Fabr. Kemper Type F 125 S

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay -Manufacturer: Klöckner Moeller, time relay multifunction relay -Type: TE-68 TE 68 -Number: 1x relay available -Dimensions: 80/25/H100 mm -Weight: 0.1 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the softwa ...