k t used for sale

Circular Wood Saw manufactured in 2021. This Format4 Kappa 400 features a saw blade diameter range of 250-400 mm and a maximum cutting height of 133 mm at 90°. It offers a cutting width with rip fence of 800 mm and a sliding table length of 2500 mm. If you are looking to get high-quality cutting capabilities, consider the Format4 Kappa 400 machine we have for sale. Contact us for further details.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Fanuc 310is total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movo ...

Tool changer turret, material ejection, control unit with analogue counting unit, bar feeder in front, L = approx. 3,000 mm,

Year of manufacture: 2024 Maximum Load Capacity: 62kg Nominal Load Capacity: 50kg Maximum Reach: 2501mm Controller: KR C5 Number of axles: 6 Range of motion: A1: ±185° A2: -175° / 60° A3: -120° / 170° A4: ±180° A5: ±125° A6: ±350°

Hello, For sale is a Keyence IM-8030T digital measurement projector including rotation axis. The measuring machine was purchased in August 2025 and has been used very rarely since then. The complete measuring unit is immediately ready for use and immediately available. Prior sale and errors excepted.

General SKU078Y540 MakeKEK Kemutec Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width340 mm Specified Features - Sieve granulator Conical granulating sieveCone mill (1x) Sieve sizesdia. 340 x 260 mm Sieve perforationø 3,5 mm Inlet± 175x260mm Outletø 450 mm Motor7,5 kW (415 V, 1450 rpm) Speed2500 rpm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Floor space1,2 x 0,7m Total height1,5 m Weight500 kgSieve granulatorsDiscountKek KemutecSieves > Sieve granulatorsDiscountBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU092Z348 MakeKEK Kemutec Powder Technology TypeBetagrind mill Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Width340 mm Specified Features - Sieve granulator MaterialStainless steel Conical granulating sieve(1x) Rotor sizesdia. 310x255mm, Sieve is missing Inletdia. 250mm Outletdia. 250mm Motorcheck With variable speed drivecheck Information With switchcheck Floor space1,6x1,0 M Total height1,7 M Weight650 Kg Technical specs Extra informationrotor sieve is missingSieve granulatorsDiscountKemutecSieves > Sieve granulatorsDiscountBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

General SKU083N397 MakeKek Kemutec TypeBetagrind LocationBarneveld Specified Features - Sieve granulator Material finishPolished inside Main Features MaterialStainless steel Motor7.5 KW Width340 mm Sieve granulators Conical granulating sievecheck Rotor sizesdia. 280x 210 mm Sieve sizesdia 340 x 230 mm Sieve perforation0,5 mm Inlet340 x 130 mm Outletdia. 350 mm Motor± 7,5 KW, 415 Volt MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Information Mounted on stainl. st. framecheck Floor space1,5 x 0,8 m Total height1,7 m Weight350 kg Extra Specifications- Assembly with Servolift frame. The name of the machine is TK Fielder. Documentation is of Kek Sieve granulatorsDiscountKek KemutecSieves > Sieve granulatorsDiscountBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU078Y541 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width340 mm Specified Features - Sieve granulator MaterialStainless steel 1.4301 (304) Conical granulating sieveCone mill (1x) Sieve sizesø 340 x 260mm Sieve perforation1 mm Inlet± 175 x 260 mm Outletø 290 mm Motor7,5 kW (415 V, 1450 rpm) Speed2500 rpm Information MakeKEK Kemutec Year of constructionunknown Mounted on stainl. st. framecheck Floor space1,2 x 0,7 m Total height1,5 m Weight500 kgSieve granulatorsDiscountKek KemutecSieves > Sieve granulatorsDiscountBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

CONTROLS    HEIDENHAIN TNC 128 WORKING RANGE -CUBIC-   X-axis travel: 610 mm   Y-axis travel: 400 mm   Z-axis travel: 450 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 300 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40 AXIS DRIVES   traverse velocity X (max): 2000 mm/min   traverse velocity Y (max): 2000 mm/min   traverse velocity Z (max): 2000 mm/min   rapid traverse X: 5000 mm/min   rapid traverse Y: 5000 mm/min   rapid traverse Z: 4000 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1800 mm   total height: 2000 mm   total weight approx.: 2300 kg ATTACHMENTS   coolant unit: yes   closed cabin: yes   European CE standards: yes Condition: - as new (barely used) - approx. 1000 spindle hours ...

Manufacturer: Konica Minolta Model: AccurioPrint C4065 Type of Machine : Digital Printing Press. Full color laser technology Condition: Used Current counter readings: Total print & copy black/white : 58,193 Total print & copy color: 262,043 Dimensions & Weight Width: approx. 2386 mm Weight: approx. 437 kg Performance Up to 66 A4 pages per minute in color Up to 81 A4 pages per minute in black & white Up to 34 SRA3 pages per minute in color Up to 38 SRA3 pages per minute in black & white Print Resolution Up to 3600 (equivalent) x 2400 dpi 256 gradations Paper Formats A6 to SRA3 Maximum size: 330 x 487 mm Optional banner printing up to 330 x 1300 mm Printable area: 323 x 480 mm, optional up to 1295 mm Paper Weight Simplex / duplex: 62 – 360 g/m² Paper Supply 2 paper trays 1 x 500 sheets 1 x 1,000 sheets Display 15-inch touch screen Toner Technology Simitri ...

Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 5kVA, equipment: rotary spindle, controlled C-axis, CNC conversational control system, Handy Genius remote hand-held control unit, tool holder: Erowa ITS 007523 quick-clamping chuck, 16-position electrode changer, extraction unit, C-module Z+K, automatic CO₂ fire extinguishing system, paper cartridge filter, electronically controlled heat exchanger, high-pressure flushing system (defective), rotary head up to 750rpm and tube guide. An on-site inspection is possible.

Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible.

Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top ...

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 1390; Engine: Rehlko KD39L04T; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

General SKU216Y057 MakeBuss-SMS Serial17145/1 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialHastelloy Motor6.8 KW Surface4.5 m2 Specified Features - Film evaporator Film evaporatorcheck Heating surface4,5 m² Capacity865 l. Rotor sizesø 500 x 2940 mm Product inletDN40 Product outletDN80 Vapour outletDN200 With jacketcheck Max. temperature—10 / 200 °C Rotor with wiper bladescheck Number of blades90 Motor6,8 kW, 500V, 1460rpm (EX) Rotor speed121 rpm MaterialStainless steel 2.4605 (Hastelloy C-22) Information Year of construction1985/2015 LocationBarneveld Floorspace1,35x1,35 m Total height5,5 m Weight1900Film evaporatorsNew arrivalsBuss-SMSColumns > Film evaporatorsNew arrivalsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new  ...

PART NUMBER 8009 SPECIFICATIONS - max material width 600mm - max cutting height 170mm - upper spindle diameter 70mm - Lower spindle diameter 70mm - Circular saw blade diameter: Option 1: 250mm/350mm Option 2: 300mm/300mm - upper spindle length, working part: 550mm - Lower spindle length working part 550mm - spindles equipped with a brake - spindle wedge 2pcs - Motor power of the top drive spindle 18.5kW - Bottom drive spindle motor power 22kW - Feed drive motor power 2.2kW - infinitely variable feed speed control on the inverter - average extraction port 2x200mm in advance: - 2 rows pawls - Toothed pulling shaft - shaft with saws - Toothed pulling shaft - Metal Sliding Roller from below: - pulling chains - shaft with saws - pulling chains - Metal Sliding Roller - overall dimensions l/w/h: 3170/1450/1730mm - weight about 2500kg ADVANTAGES – Polish pro ...

Edge banding machine Type: KAM6ALL+ Manufacturer: Holzmann Year: 2023 Min. workpiece length: 100 mm Min. workpiece width: 100 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Edge thickness: 0.4 - 3.0 mm Air pressure: 6-8 bar Machine weight: 1260 kg In very good condition, fully functional, under power Find more here - / Contact us at -

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per axis unders ...

KUKA KR 22 R1610-2 Industrial Robot Approx. 500 operating hours, serial number 1304963. 6-axis industrial robot with 22 kg rated payload and maximum reach of 1,612 mm.

Heavy CNC bed milling machine by Droop & Rein in solid cast design for machining large and heavy workpieces. The machine is equipped with a Heidenhain TNC 430 control and was overhauled in 2002. Equipped with a powerful 30 kW milling spindle, SK50 holder, and a swiveling milling head (±45°) for flexible machining operations. The robust construction ensures high stability and precision even in demanding machining tasks. The machine is powered on and can be inspected at any time.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm control: Fanuc iT workpiece weight: 100 kg travel -z axis: 1150 mm measuring system resolution capability: 0,0001 mm rapid traverse: 12 m/min travel -x axis: 320 mm rapid traverse: 6 m/min table - swivable: 0-90 Grad grinding wheel size: 400 x 63 x 127 mm b-axis indexing accuracy +/-: 1 ° spindle motor: 6 kW spindle turning speed - stepless: 800 - 1900 U/min workpiece turning speeds: 0 - 800 U/min grinding head swivelling: -10 / +100 Grad tail stock: taper in tailstock MT: 4 tailstock quill stroke: 48 mm total power requirement: 16 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,0 x 1,0 x 2,15 m 3-axis cylindrical grinding machine equipped with: - CNC control FANUC i-T - B-axis (head rotation -210/+10°) - Movomatic - Dresser on table - Coolant belt filter system - Grinding wheel flange/disc  ...

saw blade diameter: 1310 mm cutting diameter: 440 mm stroke: / mm weight of the machine ca.: 7,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PART NUMBER 7966 SPECIFICATIONS - max planing width 770mm - max planing height on both sides 200mm - Electric top/bottom adjustment - max planing height on four sides 180mm – in advance: - pulling input shaft, toothed - Flingers - pressure - 2 pulling shafts, geared (first sequential) - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft – from below: - guide strip - Slip roller, smooth, split - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling shafts – at the rear: - 2 side spindles + pressure 1) vertical right 180mm 5.5kW 2) Vertical left 180mm 5.5kW - spindle diameter 30mm - spindles adjustable up/down, right/left - manual setting of the planing width - 4 types of feed speed 6/9/12/18m/min - 2.4kW feed motor - Extraction port diameter 160mm, 180mm, 2x120mm - dimensions l/w/h 2600x1700x1650mm - weight ...

Blowing machine Kosme KSB 4000 year of manufacturing: 2003 capacity: 4.700 bph incl. preform feeding system neck type: PCO 1810 The machine is out of production since October 2025 and it is already dismantled:

Used colloid mill made by Młynkol type MK300. New 2014. Capacity: 300 kg/h.

Used colloid mill Młynkol type KM100. New 2012. Capacity: 100 kg/h. The cutting knives (teeth) in the grinder have been replaced.

Diameter range: DN 20 - DN 400 Rotation speed infinitely adjustable: 0 - 100 cm/min Max. load at horizontal roll position: 1000 kg Max. load with vertical roll position: 500 kg electr. Connection: 220 V Weight: 327 kg Space requirement: 1050 x 550 x 1700 mm

The Kolbe LW82 meat grinder pictured is for sale. The grinder is equipped with an Unter H82 5-piece blade set, which is freshly sharpened. Furthermore, a second cutting set unground is included. The wolf is in good condition and runs evenly and calmly, only on the snail there is a bump because a pestle that is too long was used, but this does not detract from the function. A video about the test run and more pictures available

Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible.

This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details.

EU STAGE 5 Compliant, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, 50/60 Hz switchable frequency via terminal link, 115 kVA Prime power, Spark arresting silencer; Water Tank Volume [l]: 518

hobbing length: 1750 mm milling width: 260 mm max. module: 10 mm table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 7 workpiece weight: 7 kg weight of the machine ca.: 0,024 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 22 kW

Used stainless steel mixer made by Kates, capacity: 250 L, new: 1999. Test pressure 0.45 MPa, working pressure 0.35 MPa, max. temperature 135°C.

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Key data: 350 kN

Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tiebar spacing: 320x320 mm Size of the clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air Valve x 2 Control with hot runners x 6 Hardened injection unit - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are s ...

Key data: 800 kN

Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heatin ...

Key data: 1300 kN

Krauss Maffei KM 130-750 CX Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Spray pressure: 2500 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Air Core Pull x 6 Control with hot runners x 18 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 2500 kN

Krauss Maffei KM 250-2000 CX Blue Power with the Sepro Industrial Robot SR S5-35HL S4 Trans robot Year of Make: 2019 Injection unit: Screw diameter: 70 mm Spraying weight: 980 g Spray pressure: 1877 bar Dosing volume: 1077 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Air Valve x 1 Hydraulic core pull x 3 Air Core Pull x 1 Control with hot runners x 16 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injection Additional  ...

Key data: 2000 kN

Krauss Maffei KM 200-1400 CX with the Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Injection weight: 617 g Spray pressure: 2007 bar Dosing volume: 679 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 560x560 mm Size of the clamping plates: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Hydraulic core pull x 3 Air Core Pull x 3 Control with hot runners x 10 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injec ...

Key data: 4000 kN

Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authoriz ...

60,000 CPH 330ml, 500ml 200/211

Belt width: 600 mm, Cooking length: 9000 mm, Heating: thermal oil, 240 kW, Steam: 4-8 Bar, 900 kg/hr at 95°C, Water: 3-5 Bar, 0.5m³/hr, Compressed air: 6-8 Bar, 120nL/min, Power: 3 x 380V, 50Hz, 9.2kW, Dimensions: 10200 x 2000 x 2750 mm, Weight: 6250 kg

Capacity: 700 pc/h, Belt width: 325 mm, Diameter cutting ring: 270 mm, CIP unit: hot water min. 60 degrees Celsius, Compressed air: 5 Bar, 3.5 Nm³/h, Power: 3 x 400V, 50Hz, 2kW, Dimensions: 1600 x 1150 x 1500 mm