k t used for sale

ABB Robotics IRB 1400 complete robot Control: S4C-M98 Max. working radius: approx. 1450 mm Load capacity: 5 kg Year of Make: 1998 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams, In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

KUKA KR 3 robot Control: KRC3 Number of axes: 6 Max. load capacity: 3 kg Max. intervention: 680 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.

Gr. working width: 1020 mm for sheet metal (at 40 kg strength) up to: 2 mm kl. Tail width: 10 x s kl. Inner radius: 1.5 - 2 x s Upper beam opening width: 190 mm Highest working point of the upper beam: 120 mm Lower beam positionability: 60 mm kl. Box profile (WxH): 165 x 125 mm Space requirement (WxD): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Wet separator KELLER, built in 2020, with piping and sep. 2 filter unit

A precision roller straightening machine is offered. Working width: approx. 120mm, processing size: approx. 0.2-1.5mm, incl. control panel and digital displays, machine weight: approx. 450-600kg. Inspection possible by arrangement.

Size: 660 x 1040 mm Equipments: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 60 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 95.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -60-kva-used/629, , = More information =, , Empty weight: 1.325 kg, Type number: 4045TF120 GENERATOR 60 KVA

x-travel: 200 mm y-travel: 200 mm z-travel: 400 mm Control: Siemens 840 D total power requirement: 84 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 7,9 x 6 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A high-speed press is offered. Press force: 38t, stroke rate: 60/300 per minute. Stroke: 6mm-50mm, ram adjustment: 40mm, infeed height: 90mm. Table surface X/Y: 550mm/440mm. Soundproof enclosure, accessories: external control cabinet, tool area lighting, vibration dampers. Total weight: approx. 2800kg, overall dimensions X/Y/Z: 1650mm/1450mm/2250mm. Inspection possible by arrangement.

Single Head Corner Welding Machine

Key data: 150 KW, 250 kVA, 400 V

K+S Gas-CHP GTK 140 Natural gas, electricity and heat generators from 2011, unknown operating hours, with control. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LB4, 250 KVA Manufacturer: K+S (Kuntschar and Schlüter) Model: GTK 140 Type: Natural Gas Electricity and Heat Generator Serial Number: 00825 Power [KWel]: 140 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 4,500 Dimensions LxWxH [m]: 3.50 x 1.30 x 2.30 AC Generator: MarelliGenerators MJB 250 LB4 Manufacturer: MarelliGenerators Model: MJB 250 LB4 Type: AC Synchronous Generator Serial Number: MY28069 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2011 Operating hours: unknown Weight [kg]: 705

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

KRONES Contiform 312 – PET Blow Moulding Machine (Year 2019) High-performance PET blow moulding machine designed for efficient production of PET bottles for beverage applications. The KRONES Contiform 312 features advanced 3rd generation blow moulding technology, combining high production capacity, energy-efficient infrared heating, and servo-driven stretching for precise bottle quality. The machine is currently still under power and available for inspection. General Information Manufacturer: KRONES Model: Contiform 312 Year of Manufacture: 2019 Condition: Still under power Documentation: Manuals available Technical Specifications Production Capacity: 24,000 bottles per hour Blow Moulding Cavities: 12 Bottle Neck Finish: 38 mm Conversion to 28 mm neck finish possible by buyer Bottle Formats / SKU Volumes: 235 ml 780 ml Operating Data Working Hours: approx. 5,300 ...

CNC vertical machining center Type: Alpha-Center HP 2060 Manufacturer: KAAST Year: 2015 Control: Heidenhain TNC 620 X: 2060 mm Y: 850 mm Z: 815 mm Table dimensions: 2150 × 800 mm Max. table load: 3240 kg T-slots: 18 mm, 7 pcs, pitch 125 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Main motor power: 26 kW (35 HP) Rapid traverse (X/Y/Z): 33/33/25 m/min Working feed: up to 12,000 mm/min Max. tool length: 250 mm Dimensions: 5450 × 3540 mm Weight: 15200 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Panel sizing saw format 4 type Kappa Automatic 80 Technical data: - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum plate lifter: included

An eccentric press is offered. Press force: 7500kg, stroke: 1mm - 40mm, stroke rate: 60rpm - 240rpm, ram adjustment: 70mm. Precision roller feed, external control unit, digital process monitoring, sound insulation cabin, strip decoiler. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1400mm/1200mm/2100mm. Inspection possible by arrangement.

Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos

An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement.

A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement.

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...

This 9-axis KIRNER K360HS cylindrical grinding machine was manufactured in 2009. It features a grinding spindle maximum speed of 8,500 rpm and a workpiece holder maximum diameter of 150 mm. The integrated loading robot allows for efficient automation, handling up to 1,020 pieces. If you are looking to get high-quality grinding capabilities, consider the KIRNER K360HS machine we have for sale. Contact us for further details.

Just Arrived Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Hours: 12110 Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, w ...

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

1 speed on cutting drum, Product bottom exit in 200 litre tote bins, Block size: max 530 x 530 mm, Power: 3 x 380V, 50Hz, 22kW, Dimensions: 950 x 1450 x 1900 mm

Speed: 2880 RPM, Hopper: 300 litres, Power: 3 x 380V, 50Hz, 27 kW, Dimensions: 900 x 1100 x 1550 mm

Kronen KUJ Cube Cutter Vegetable Slicer Machine in very good, well-maintained and rarely used condition with 5x5mm and 10x10mm pair of cutting rollers with shelf trolley for the cutting rollers as well as tools for changing and removing Video of the test run and more pictures available

With BW200 loader and unloader, Bowl: 120 litres, Knife speed: variable speed, max 5250 RPM, Bowl speed: 2 speeds, Mixing speed: 2 reverse speeds, Controls: Command 1000K, Power: 3 x 400V, 50Hz, 87kW, Dimensions: 2200 x 2700 x 1700 mm, Weight: 2000 kg

Command 1000K controls, With lifter and unloader for 200L tote bins, Temperature sensor, Bowl: 200 litres, Knifes: 6 variable speeds, Bowl speed: 2 speeds, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 108kW, Dimensions: 2500 x 3000 x 1800 mm, Weight: 2900 kg

With unloader, water dosing and tempurate indicator, Bowl: 2 speeds, Knives: variable speeds, Steam: 1.5 Bar, 55 kg/h, Vacuumpump: Elmo 2BV2071, 125 m³/h, Power: 3 x 400V, 50Hz, 50kW, Dimensions: 1750 x 1950 x 2000 mm, Weight: 1700 kg

With double lifter for 200L tote bins and unloader, Bowl capacity: 750 litres, Knife speed: variable, 60 - 3300 RPM, Mixing speed: 150 RPM, Bowl speed: 4, 7, 10, 14 RPM, Power: 3 x 380V, 50Hz, 273kW, Compressed air: 6 - 10 Bar, Water: 2 - 6 Bar, Dimensions: 4330 x 3700 x 3050 mm (open lid), Weight: 7900 kg

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

Pastry Filling Machine, 1 Piston Machine

plate width: 2500 mm plate depth: 4000 mm plate height: 345 mm no. of flutes: 11 : 2 weight of the machine ca.: 7000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flour spreader/flourer for mounting on a machine or base frame rotating brush, spreading width 45cm, with trigger sensor Separate control Spreading quantity adjustable completely stainless steel Container 44 x 10 H15cm

Weigher/dough divider Stainless steel version with digital control with plastic funnel for approx. 240kg dough Weight range approx. 400 - 2900g or 100 - 600gr per piece Output approx. 1,500 pieces per hour Speed infinitely adjustable# - Bakery condition

Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack confi ...

Stage V Generator, Stage V Aggregaat, Stage 5 Generator, Stage 5 Genset, Stage V Gen set, Stage V Generator set, EU Stage V Generator, StageV; Gross weight [kg]: 5215; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, 24 hour fuel tank; Water Tank Volume [l]: 1750

This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details.

x-travel: 4000 mm y-travel: 2500 mm z-travel: 1500 mm bore diameter: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy. The data for this ad was cr ...

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement.

- Clamping force 4 - 30 kN - Weight 19.5 Kg - Single stroke vice

; Power [PS]: 98; Gross weight [kg]: 3000; Engine: Battery System: LIFePO4; Accessories: Battery, Control Panel, Power connection Input:, - AC socket: 3P/5W, 1x60kW, 1x30kW, - AC copper: 3P/4W, 60kW, - DC socket: 60kW, Power connection Output:, - AC socket: 3P/5W, 1x60kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 60kW

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4