k t used for sale

High-performance mechanical automatic punching machine with coil system for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine Type: Automatic Punching Machine Year of Make: 1994 Press force: 3150 kN Drive type: mechanical Stroke rate: 20 – 120 1/min Plunger stroke: 20 – 150 mm Plunger adjustment: 150 mm Table surface: 1780 x 1250 mm Plunger area: 1500 x 1000 mm Installation height: 565 mm Tool weight max.: 3000 kg Strip width: 30 – 800 mm Band thickness: 0.5 – 3 mm Max. strap thickness: 4 mm Strip infeed height: 160 – 260 mm Belt speed: 4 – 30 m/min Straightening rollers: 9 pieces Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

· Krones Monobloc VK2V 066-103/KK, serial number K090031, built in 1999, capacity 24,000 bottles per hour. · Krones labeller, model 720-18-86-130, serial number K090-C31, built in 1999, output 28,000 bottles per hour. · ZM Jerzy Robak, rinser, model PBSz-01-60, serial number 3.184, year of construction 2014. · Fischer pasteurizer, model 10Pl, serial number 99096, year of manufacture 1999. · Krones crate washer, model KKW-50, serial number 690-095, built in 1995. · Krones crate packer and unpacker, model Linapac, serial number K462-137, built in 1999. · Krones bottle washer, model KES-1-1-190/19-80, serial number 671-214, built in 1998, capacity 28,000 bottles per hour. · Krones conveyor belts with associated control cabinets and control panels

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Key data: 500 kN, 91 g/PS, 35 mm

For sale is a KraussMaffei injection molding machine type 50-190 C1 from 1994. Prices and other inventory on inventar-verkauf.de/id/alesco The machine is equipped with a KraussMaffei control panel/control panel for operation and monitoring. In addition, a handling/removal system from Geiger Handling is mounted on the machine, which can be advantageous for automated processes in production. Overall, the system makes a well-maintained, used impression with the usual visual signs of wear from operation. Details Brand: KraussMaffei Type: 50-190 C1 Factory No.: 44207 Year of Make: 1994 JN Total: 45 A Total: 50 A UN motors: 400 V UN heating: 400 V Type of current: 50 Hz Circuit diagram: 697 5107 Circuit diagram: 628 8205 Device Connection Diagram: 697 5207 Accessories Geiger Handling (Removal Unit/Handling) KraussMaffei control panel/contr ...

Key data: 1200 kN, 140 g/PS, 35 mm

For sale is a KraussMaffei 120-340 B3 injection molding machine built in 1995. Prices and other inventory on inventar-verkauf.de/id/alesco Details: Type: 120-340 B3 Year of Make: 1995 Machine No.: 123209 Pre-fuse motor: 125 A Pre-fuse heating: 100 A Screw diameter 35mm , max. 2156 bar The machine has accompanied us reliably for years in our prototype construction.

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsFryma KorumaProcessing vessels > Processing vess ...

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...

A Klieverik roll-to-roll sublimation and transfer printing calendar is available. Media width: 3200mm, max. working width: 3200mm, heating cylinder diameter: 195mm, max. temperature: 220°C, process speed: 1.25m/min, production capacity: approx. 135m²/h. Machine dimensions X/Y/Z: approx. 4150mm/1200mm/1550mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible.

cutting diameter: 250 mm dimensions of saw-blade: 450 x 45 x 2,0 mm cutting width: 280 x 200 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 170 x 200 mm cutting speed: 16- 32 m/min power requirement: 1,3 kW dimensions: 1,3 x 0,55 x 1,0 m weight: 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

List of spare parts for Krauss-Maffei MC3 injection moulding machine (KM 1600 T & 2300 T) 1 Calzoni MRE3100I hydraulic laminating motor reconditioned by FHP 1 LCD screen Voith variable flow triple pump : Type IPV /7-250 and Type : IPV7-200 VT 5041 Power Boards 2 VT-VRPA power cards (Orginal Packaging) 1 VT-VRRA power card (Orginal Packaging) 1 keyboard 1 LCD screen 2 GR 400 cards (Orginal Packaging) 2 AE 501 cards(Orginal Packaging) 1 SE 502 card (Orginal Packaging) 1 IO 502 card (Orginal Packaging) 1 NT 500 transformer 3 heating collars 10 KW

Used Lifting Kneader KEMPER, Type: F 15 S -In Bakery Condition- - for 15 kg flour or 24 kg dough - New stainless steel boiler - 3 gears / speeds - with protective grille - Technically everything tested and cleaned - Very smooth running - Condition very good - Video can be sent Visits and test runs are possible by arrangement.

General SKU004U062 MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer Pre-mixerConical screw mixer (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm MaterialStainless steel 1.4541 (321) Information Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX compatiblecheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar) DiscountPre-mixersEngelsmannDiscountMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 160 mm capacity 90 degrees: square: 240 x 240 mm band length: 425 x 40 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: flat: 150 x 250 mm capacity 45 degrees: square: 170 x 170 mm total power requirement: 1,8 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,4 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very clean and brand-new 110 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 110 kVA Prime power: 100 kVA Frequency: 50 Hz Voltage: 400/230V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Large integrated fuel tank New condition Year of manufacture: 2025 Applications: Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supply ...

Very clean and brand-new 170 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 170 kVA Prime power: 155 kVA Frequency: 50 Hz Voltage: 400/231V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Integrated fuel tank – 380L New condition Year of manufacture: 2026 Applications Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supp ...

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

Dorin K50CS All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Floor-standing unit approx. 100l capacity Stainless steel version with agitator with boiler tilting device with outlet tap double-walled, with thermal oil/electric heater Heating 50 - 200°C

Manufacturer: PAAL Model: KONTI 700 G/S/K Year of Manufacture: 2011 Type of Machine :Baling Press Key Features - Cross-lacing system (optionally switchable) - Oil cooling system - CE marked Find more here - / Contact us at -

This 7-axis KASSOW ROBOTS KR1205 was manufactured in 2020. It features a reach of 1200 mm and a payload capacity of 5 kg, making it suitable for various applications. The robot arm includes an original Kassow Controller and a tablet teach pendant for ease of use. If you are looking to get high-quality automation capabilities, consider the KASSOW ROBOTS KR1205 robot arm we have for sale. Contact us for further details.

Manufacturer: Reckermann Model: Delta 1300 Kombi Configuration: 3-axis combination Find more here - / Contact us at -

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

PLASTIC ELECTROPLATING PLANT ENTHONE GMBH, BJ. 2012: Automated system / area of application: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Goods window per product carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per product carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / output: 20 pcs. merchandise carriers per hour, clearance anode/anode chrome 700 mm, Copper 700 mm, nickel 700 mm, clear retraction dimension 550 mm in the direction of travel, 3100 mm in width, bath dimensions (rinsing) 3100 mm x 700 mm, / power consumption: drives: transport system 133 KW, filter 194 KW, exhaust air 229 KW, sewage system 150 KW, switchgear 704 KW, rectifier approx. 3190 KW, heating energy approx. 1410 KW / consisting of: automat ...

This 4-axis LASAG KLS 246 CL60 laser welding machine was manufactured in 2008. It offers advanced laser welding capabilities suitable for precision applications. Consider the opportunity to buy this LASAG KLS 246 CL60 laser welding machine. Contact us for more information about this machine.

permissible. Total weight: 2300 kg, with loading bucket

We offer you a Kärcher MIC-84 from a current recycling. Year of manufacture: 2018 First registration: - Condition: Used, but correspondingly good for its age RDh: 577.1 Asking price: 40.000,00 EUR VHB Factory Price: - Equipment / accessories / other information: All information WITHOUT guarantee! Fiedler Wedge-Vario Snow Blade Kugelmann Duplex Silo Spreader with Control Panel Location: 37186 Moringen Asset Manager: Klaudius Giolbas Phone: 0172 2796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale

Key data: 60 kVA

380V 64 A Plug Length 1.20 m Width 0.80 m Height 1.75 m Weight 350 kg Color: Green Compressed air for control Machine is unchecked.

Holder Metabo for Flex 230 mm Length 0.5m Width 0.5 m Height 1.30 m

380V 16A Plug Cables and connectors new Length 0.87 m Width 0.4 m Height 1 m Color: Gray

380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object

Manufacturer: Kellenberger Model: 175-600 U Type: Universal cylindrical grinding machine Find more here - / Contact us at -

Manufacturer: KASTO Model: E2 Type: Automatic band saw Find more here - / Contact us at -

Manufacturer: KEYENCE Model: VL 7701 Type: Optical 3D measuring machine Year of Manufacture: 2025 Find more here - / Contact us at -