k t used for sale

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Spiral mixer KEMPER, type: SPL 50 -in very good condition- - Kettle for 80kg dough or 50kg flour - Center rod for smaller amounts of dough - With new long connection cable and reversible plug - a time clock - Forward and reverse gear with 2 speeds each - Machine stop when the lid is opened - Stainless steel spiral and boiler - Stainless steel dust cover - Bearings, V-belts and electrics have been checked The kneader is in very good condition and is ready for immediate use. The machine has been technically tested. Visits and test runs are possible by arrangement.

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

Komorimatic with Technotrans Beta c ,PQC IV with PDC-S, S-APC,powder sprayer Grafix, KMS IV with adjustment of diagonal register (cocking),AMR , all washing devices,KHS approx 200 mil impressions

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 95 mm -Clamping height: 85 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 180/35/H70 mm -Weight: 1.0 kg/piece

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 54 mm -Clamping height: 58 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 135/35/H70 mm -Weight: 0.9 kg/piece

Carton equipment Double delivery extension IR/TL final dryer Non-stop feeder High-performance de-electrification Double sheet inspection Semi-automatic plate changer Inking unit temperature control Elettra washing system for blanket, impression cylinder, and rollers Tresu chambered doctor blade Non-stop delivery Weko AP230 powder unit Eltosch IR/TL dryer Baldwin combination refrigeration unit Colortronic ink metering approx. 250 million impressions

Komorimatic with Baldwin Combi Cabinet, APC, PQC, PDCSX, ink temperature control, All washers, Coating unit with Harris&Bruno, HUV dryer with 1 lamp in delivery, Ink declutch unit 1 and 5, Skeleton transfer cylinders (Without powder sprayer, without IR dryer) approx. 115 mil impressions

Souffleuse KAUTEX H10-3 S80 2D/3D Diamètre vis : 140 mm ?Machine retrofitée en 2005

A direct warping machine Karl Mayer is available. Working width: 42inch, yarn feeding: NC. Including memory, roller unit and all reeds. Without creel. An inspection on site is possible.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customers premises from 2025 up to and including January 2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

16 stations Hand feeding station Missed feed control Criss-cross delivery Max. format: 310 x 460 mm Min. Format: 100 x 105 mm Video available upon request

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -10°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37°C and -10°C

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 16A; Water Tank Volume [l]: 250

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 200 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 890 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 350 kg,

Key data: 5 mm

Edge banding machine Edge banding EBM Type: KDP 112 SLK Year of Make: 2000 Gluing over hot-melt adhesive basins Plastic edges and veneers 0.4 to 1mm PVC edges and thick veneers 1.0 - 3.0 mm Solid edges up to 5 mm Flush saws with cross-cut unit Flush milling at the top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are indicative. Depending on the distance, these may vary. The item offered is offered with differential taxation. The sales price shown is the gross fina ...

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

Knuckle Boom Crane Available – National Oilwell Varco (NOV) High-quality offshore lifting equipment ready for deployment: Make: National Oilwell Varco (NOV) Crane Type: Knuckle Boom Crane Model: OC2599KCE-15-25(18) Manufactured: 2011 Condition: Excellent Origin: Removed from FPSO vessel Safe Working Load (SWL) & Radius: • 1 Fall: 7.5T 25.4m • 2 Fall: 15T 24.9m ⚖️ Weight: 47.1T (excluding pedestal) Location: Europe Ideal for offshore, marine, and heavy lifting operations.

Key data: 1200 m³/h, 1 kW

For sale I offer a mobile welding fume extraction system Kemper cartridge filter system 7000 from 1997. and is given. The extraction system is in good condition for its age and has hardly been . Shipping available for an extra charge. Extraction is tested and sold immediately ready for use with a new UVV test and operating instructions. # Extraction # Kemper # System # 7000 # Fume extraction # Cartridge filter # Extraction system # Mobile

Koppens Former Model: VM400HSE 400mm belt width Screw Fed system New Mitsubishi touch screen Excellent overall condition With one mould set included

2 CUMMINS generator set (1 GE ) as a soundproof container Power 1000 Kva Engine type KTA 38 G3 9000H LSA Alternator (2 GE) on chassis Power 1000 Kva Engine type KTA 38 G3 8000H LSA Alternator

Manufacturer: Keyence Model: Agilista 3200W Input Voltage: 100-240V AC, 50/60Hz Power Consumption: 750 VA Certification: CE Find more here - / Contact us at -

An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

cutting diameter: 800 mm saw band length: 9195 mm cutting width: 1,6 mm total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m cutting range enlargement up to 800 round steel roll conveyor coolant device chip conveyor Technische Daten: Schnittbereich rund / cutting range round 800 mm Schnittbereich vierkant /cutting range square 830x730 mm Schnittgeschwindigkeit stufenlos / cutting speed stepless 12-120 m/min. Sägebandlänge / dimensions of the saw band 9195x67x1,6 mm Gesamtantriebsleistung / drive capacity 23 kW Gewicht der Maschine ca. / weight 11600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.79 m, Overall length= 1.36 m, Overall width= 0.56 m, Net weight= 292 kg,

DESK WITH SINGLE SET DRAWER C/W BLACK TEMPERED GLASS ON TOP WOOD DARK COLOURED DESK SIZE : 48.5" (L) X 38" (W) X 29.5" (H) FACTORY F40

Masterwood K29S Multi-Spindle Drilling Machine Number of spindles 29 Rpm 2800 rpm Distance between first and last drill bit 896 mm Number of pneumatic clamps 4 Distance between the centers of the individual spindles 32 mm Max drilling depth 80 mm Operating pressure 6 – 7 bar Motor power 3kW Technical documentation

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

electric motor, three-phase motor -Manufacturer: Dalian Keshunwei, electric motor with fan -Type: YSJF 112-12.0/4 -Power: 12 Nm -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection rating: IP23 -Fan: Type G-112A, see photo of the nameplate -Dimensions: 450/290/H235 mm -Weight: 34.1 kg

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 1760; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 327

hobbing length: 1750 mm milling width: 260 mm max. module: 10 table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm M ...

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm mitter cutting - all-position: +90°/-90° ° cutting speed: 10/20 m/min voltage: 400 V feed speeds infinitely variable: 0 - 1000 mm/min total power requirement: 3,4 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1,10 x 0,9 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Throwing length approx. 2500 mm, width approx. 300 mm, discharge height approx. 720 mm

Key data: 500 mm, 1000 mm

Circumferential diameter over bed 500 mm, over support 290 mm Center width 1000 mm Speed range 1-3000 1/min, spindle nose bayonet Gr 8 Spindle bore 70 mm Tailstock quill MK 5 / stroke 160 mm incl. Control MTC K, Face Plate Fixed bezel with rolling heads Steel holder head system Multifix C with 1 cassette Coolant Setup

- stationary magnetic particle crack detector - deutroflux uws 2500 for longworkpieces - movable carriage for lengte adjustment - 2 phase shifted AC currents generate magnetic field thus, cracks in every direction are detected - skin effect of AC uniform magnetization and demagnezation even in complicaties workpiece geometrie like cranckshaft - new price EUR 250.000

New screening drum for Komptech Maxx. Perforation 25 x 25 mm offset square. Sheet thickness 8 mm. IMMEDIATELY AVAILABLE.

z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! ----- BALLER PAAL KONTI 425 C Technische Daten: Hersteller: Paal Typ: Konti 425C Herstellungsjahr: 1995 Bwsbjycfuqsmcbw Nveh Einfüllöffnung: 102 x 175 cm Antriebsleistung: 170 kW Kompressionskraft: 85 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 500-650 kg Pressgewicht: 25 t PREIS BEI ANFRAGE!

For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Kledex Dlanem Aty Atsl Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST! ----- Verkaufen horizontal Baller Paal Konti 425 D Technische Daten: Hersteller: Paal Typ: Konti 425D Baujahr: 2002 Einfüllöffnung: 102 x 200 cm Antriebsleistung: 2 x 45, 2 x 75 kW Druckkraft: 115 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 550-850 kg Pressgewicht: 36 t PREIS BEI ANFRAGE!