k t used for sale

General SKU400X1191 LocationBarneveld CEcheck MakeKühner Main Features MaterialStainless steel Volume186 Ltr. Motor0.95 KW Specified Features - Drying oven Climate boxcheck Max. temperature—15 / 80 °C Number of compartments:1 Capacity186 Ltr. Internal width580 mm Internal depth596 mm Internal height538 mm Electric heatingcheck Electric capacity0,95 kW 230 V Number of doors:1 MaterialStainless steel Information TypeLT-X No.67001.007 With switchcheck Floorspace0,855x0,804 m Total height0,841 m Weight100 kg Extra SpecificationsWith shaker: speed: 20–500 rpm: plate dimensions: 420 × 415 mmDrying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU397X1138 MakeBegerow LocationBarneveld CEcheck TypeK800021 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface0.07 m2 Cake30 Ltr. Specified Features - Candle filter Candle filtercheck Number of candles1 Cake capacity30 l. Liquid outletDN50 Max. temperature0 / 140 °C Vessel sizesø 324 x 440 mm MaterialStainless steel 1.4301 (304) Information No.9092248 Year of construction2003 Mounted on framecheck Mounted on legscheck Floorspace0,70 x 0,80 m Total height1,50 m Weight100 kgCandle filtersBegerowFilters > Candle filtersBrand > Begerow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

General SKU379X1444 LocationBarneveld CEcheck MakeKiekens Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous MaterialMild steel Capacitydust container, volume 120 l. Motor5,5 kW, 400 volt Capacity600-700 m3/h Information TypeKD 8000 Year of construction2019 Floor space1,60x0,70 m Total height1,50 m Weight350 kg Extra SpecificationsWith filter cyclone, hoseMiscellaneousKiekensMiscellaneous > MiscellaneousBrand > Kiekens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU322X560 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume22000 Ltr. Motor18.5 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity22 m³/h With motor18,5 kW 380—420 V 2925 rpm (Ex) InletDN40 OutletDN65 Information TypeCPKC1 Mach.No.6-N12-596129 Year of construction2004 Mounted on framecheck Floorspace1,30 x 0,50 m Total height0,53 m Weight330 kgCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU322X559 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume80000 Ltr. Motor15 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity80—120 m³/h With motor15 kW 400/690 V 2940 rpm InletDN40 OutletDN40 Information TypeEtabloc-G 50-200/1502.2 610 Mach.No.9970484029 Year of construction2003 Floorspace0,68 x 0,30 m Total height0,40 mCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine.

This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine.

General SKU400X1194 LocationBarneveld CEcheck MakeKühner Main Features MaterialStainless steel Volume186 Ltr. Max.temp.80 °C Specified Features - Drying oven Climate boxcheck Max. temperature—15 / 80 °C Number of compartments:1 Capacity186 Ltr. Internal width580 mm Internal depth596 mm Internal height538 mm Electric heatingcheck Electric capacity0,95 kW, 230 V Number of doors:1 MaterialStainless steel Information TypeLT-X No.67001.6 With switchcheck Floorspace0,86 x 0,81 m Total height0,82 m Weight100 kg Extra SpecificationsWith shaker speed: 20–500 rpm and plate dimensions: 420 × 415 mmDrying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU404X1206 MakeKrieger LocationBarneveld CEcheck TypeMMU 15 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume22 Ltr. Motor0.55 KW Vacuumcheck Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity15 Ltr. (max. 22 Ltr.) Vessel sizesø 400x300 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN20 With jacketcheck 5 Ltr. Max. temperature140 °C With propellor stirrercheck Motor0,55 kW, 230/400 V, 1380 rpm Speed mixing shaft2—153 rpm With homogenisercheck Motor0,025 kW, 380—420 volt, 1350 rpm Information No.WO 202220 Year of construction2003 Mounted on legscheck With switchgearcheck (as is) Floorspace1,50 x 1,30 m Total height2,00 m Weight750 kg Extra SpecificationsWith control cabinet with  ...

This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine.

This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine.

This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information.

General SKU413X1260 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacketcheck (Jacket: 180 Ltr.: Shaft: 110 Ltr.: Max. temp. : 10 / 80 °C) Max. temperature10 / 150 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm Information No.K62.281-014 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 b ...

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Complete plant for the production of sand-lime bricks - Autonomous production plant with 6 employees - The plant is designed for a production of 50,000 tons /year - Pipe material round stone, aggregate size 32-50 mm - Crushing from 16-50 to 0-3 mm - Primary crusher/fine crusher/harp sieve/filler mill - Extinguishing in reactors 1&2 - Pressing: the press presses at 120 bar - Hardening boiler steam plant/so-called autoclaves = total 6 pcs. + 1 reserve - Residual steam is reused or discharged to the other halls - Packaging system: Fully automatic

General SKU329X704 MakeHermann Linden LocationBarneveld CEcheck TypeKIII5A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4301 (304) Z-blade mixercheck Capacity5 l. Trough sizes190x240x200 mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor2,2 kW, 400 volt, 1420 rpm With variable speed drivecheck Arm speed568 rpm Screw dischargecheck Motor3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Screw speed14/72/144 rpm Information No.1767 Year of construction1996 Mounted on foundationcheck With switchcheck With switchgearcheck Sizes switchgear0,60x0,40x2,0 m Floorspace1,30x0,80 m Total height1,50 m Extra SpecificationsWith Lauda oil heating, type K6 KSZ-blade mixersHermann LindenKneaders > Z-blade mi ...

General SKU413X1258 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacketcheck (Jacket: 180 Ltr.: Shaft: 110 Ltr.) Max. temperatureJacket: 10 / 80 °C: Shaft: 10 / 80 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm Information No.K 62.281-021 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 ...

I am selling an autoclave Korimat KA 380 Programmable control with the ability to record temperatures 1 basket for inserting products Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable.

From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

Meat grinder Kolbe SW 114 / II, stuffed grinder, Year of manufacture 2014, completely in stainless steel, 2 speeds, Connection 400 V, 9.5 kW, dimensions LxWxH approx. 110x68x108cm, weight approx. 380kg, very good used condition, fully functional

Material No.: 1.2487.0 // Serial No.: 1267-3491416 Operating hours: 26512 h Equipment / Additional information: Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00

Bread long-forming machine Bread long-moulder Kemper IL- Special - Bread long-weaver - Manufacturer: Emil Kemper GmbH - Type: IL Special - 400 volts

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

voltage: 110 - 230 V frequency range: 50 - 60 Hz Power connection: 0,5 kVA Dimensions (HxWxD): 1000 x 800 x 1750 mm weight: 150 kg Measuring machine for bar knives. Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8936 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2006 Parameters: Clamping force: 65 t Screw diameter: 28 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

Used spiral mixer KEMPER, type: SPL 125 -in bakery condition- - for 200 kg dough or 125 kg flour - 2 speeds - Forward and reverse gear - Boiler made of stainless steel - 2 Time clocks - Emergency stop switch - Back from the bakery - Technically tested, immediately ready for use The kneader is in good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Inv. Num. : 8937 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2008 Parameters: Control System: MC5 2.0 Clamping force: 65 t Screw diameter: 25 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): - mm arm length: 1600 mm workpiece height max.: - mm taper MK: 5 total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.

General SKU390X1012 MakeR. Sturm LocationBarneveld CEcheck TypeA-K3080 Main Features MaterialMild steel/Stainless steel Number of1 heads Dosing1000000 ml Specified Features - Powder filler MaterialMild steel, Stainless steel Powder fillercheck Bag fillercheck Number of dosing heads:1 Capacity1500 kg With hoppercheck Information No.K3080-12 Year of construction2012 Mounted in framecheck With switchgearcheck Extra SpecificationsWith: Bizerba weighing unit: max. 1500 kg, min. 50 kg, e = d = 0.5 kg Vibro floor with two motors: 0.55 kW, 500 V (Ex)Powder fillersSturmPackaging machines > Powder fillersBrand > Sturm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU284X379 MakeFryma TypeDelmix MZM/VK-150 No.17163/94 Year of construction1994 LocationSold Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor1.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselcheck Capacity150 Ltr. (240 Ltr. bruto) Vessel sizesDia. 700x920 mm Conical bottomcheck Flat top sidecheck With covercheck OutletDN65 With jacketcheck 30 Ltr. Motor1,5 kW Speed mixing shaft48 rpm. With homogenisercheck (2925 rpm.) Motor18,5 kW Information With switchgearcheck Floorspace1,7x1,8 m Total height1,9 m Weight1100kg CEcheck Extra Specificationswith vacuum pump: Sterling, typ: Lema 25, suction capacity: 16 m³/h, water consuption: 0,26 m³/h, motor: 1,1 kWProcessing vesselsFryma KorumaProcessing vessels ...

Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50

General SKU292W524 MakeDynomill LocationBarneveld TypeKD60 C Main Features MaterialStainless steel Volume60 Ltr. Motor44 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity60 Ltr. Motor44 kW, 380 volt, 1465 rpm Rotor speed1475/1170/940 rpm Capacity800-15.000Ltr. 450-550 kg/h Information No.880489 Year of construction1988 With switchcheck Floorspace2,0 x 1,1 m Total height1,5 m Weight1650 kg ATEX compatiblecheck Extra Specifications- Grinding media filling 48-51 l. : : - Peripheral speeds of agitator discs 16/13/10 m/sec Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle

used extruder in good condition. Complete with motor, gearbox and heating bands

Manufacturer: KraussMaffei Model: 80-390 C1 Year of Manufacture: 2001 Electrical Specifications Operating Voltage: 3-Phase, 400 V Frequency: 50 Hz Total Rated Current: (In Total) 57 A Motor Current: (I Motor) 30 A Main: Fuse 80 A Find more here - / Contact us at -

Manufacturer: Keyence Model: WM 3000 Year of Manufacture: 2020 Type of Machine : 3D coordinate measuring system The device has already been upgraded to Windows 11 Measurement Specifications - Maximum Measuring Range (W x D x H) 10000 x 3500 x 5000 mm - Guaranteed Accuracy Range (W x D x H) 3000 x 1500 x 1500 mm - Measuring Accuracy +/- (28 + 5L/1000) micrometers - Repeatability +/- 10 micrometers Minimum Display Resolution - Distance Resolution 0.001 mm - Angle Resolution 0.001 degrees Camera Unit Rotation - Theta Rotation (Pan) +/- 90 degrees - Tilt Rotation +/- 30 degrees Connectivity - External Input Voltage-free input, 2 inputs - Bluetooth Bluetooth 5 - USB USB 3.0 - Infrared Communication 945 nm Power Supply - Power Supply Type Supplied via dedicated power supply unit - Rated Voltage DC 24 V - Power Consumption 1.7 A Environmental Conditions - Operating Temperature + ...

Centrifugal pump, diesel fuel Pressure 6 bar, Pump capacity 200 m3/h el.mootor Siemens 55 kw , 2940 rpm , 100 A 6 pcs.

We offer a new unused cable peeling machine from a small German company specializing in recycling machines. The machine is new and unused and can be used for different cable diameters. from 10 - approx. 50 mm the machine is very robustly constructed

KRAZ 255 V1A, 1989 model year, 176 kW, diesel. OPTIONAL EQUIPMENT: FORESTER 2012TH HYDRAULIC LIFT. Registration in the EU, number, registration certificate.

System Overview Each line consists of one gravity roller conveyor, one gravity acceptance piece, and one chain conveyor. The system is designed to transport pallets linearly by gravity over a defined gradient using braking rollers. All components feature a robust sheet steel construction with galvanically zinc-plated carrying rollers. Height adjustment is provided via threaded spindles (M20). The maintenance-friendly design ensures continuous operation and easy replacement of individual assemblies. 1. Gravity Roller Conveyor ( 6 pieces ) Transports goods linearly over a defined gradient on carrying rollers. Features premium braking rollers with a three-stage planetary gear for progressive braking and extremely smooth start-up. - Conveyor width FB: 926 mm - - Total width GB: 1066 mm - - Conveyor length FL: 3600 mm - - Parking space length SL: 1200 mm - - Inlet height EH: 320 mm -  ...

Karl Klink RSI 2.5 EH Broaching Machine - Year of construction 1965 - Automation Semi-automated by hydraulic tool feeder - Pulling force 2,500 kg (25 kN) - Broaching speed 1 m/min to 9 m/min (infinitely variable) - Max. stroke 800 mm - Max. workpiece diameter Ø 240 mm - Number of clearing stations: 1 - Motor 3 kW - Power supply 380 volts / 50 Hz - Integrated coolant system - Central lubrication - Electrical actuation - Tensile force indicator - Tensile force limitation LxWxH / Weight 1550 kg

For sale is a good used Keyence digital measurement projector of the type IM-6225. The meter is immediately available and ready for immediate use. Profile projector can be viewed and tested on site under power. Prior sale and errors excepted.

Offer 26008 Technical data: - 3 mot. driven rollers with asymmetrically hydr. Feeding of the two lower rollers - bends e.g. flat bars 100x40 flat up to Ø 600 mm - bends e.g. flat bars 100x20 upright up to Ø 800 mm - bends e.g. U 180x70 up to Ø 800 mm - Shaft diameter per 100 mm - Useful length of the standard shafts approx. 250 mm - Shaft rotation 5.4 rpm - Roller diameter 315 mm - Drive 400 V / 11 kW - With: - Separate control panel with digital actual value displays - Lateral straightening rollers manually adjustable - Standard bending kit for flat and angle material - Weight approx. 3500 kg - Space requirement approx. W 1600 x H 1700 x D 1600 mm

Coolant filter system KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper belt filter -Control - OP 3 -Coolant pumps Dimensions: LxWxH 2.4x1.2x1.5 meters / Weight 1200Kg

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available