k t used for sale

Fabr: Kuper Machine type: ST/I-1200 Machine number: 7560 Year: 1991 Power: approx. 51kW Working width: 1200mm PROVIDER

Univ. NC tool milling machine KUNZMANN type WF 3/4 machine no. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle mount SK 40 Spindle speed 40 - 2500 rpm. Feeds X, Y and Z- axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical quill adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 volts, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed over 2 gear stages and infinitely variable via frequency converter - Vertical milling head +/- 90 swivelling - hydr. Tool clamping - fixed angle table - control cabinet fixed to the machine - coolant tank with pump opposite - central lubrication - lighting space requirement L x W x H 1800 x 1800 x 1900 mm weight 1300 kg good condition; used

Table length: 2300 mm Table width: 825 mm Longitudinal X: 1900 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 0   CNC Brand: Heidenhain Chip conveyor Central lubrication HR 410 Handwheel Oil Chiller X-Axis:         1900mm Y-Axis:         800mm Z-Axis:         800mm Table Length:   2300mm Table Width:    825mm Table load:     3500 Power on spindle:22kW Spindle speeds: 4000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Length:         5700mm Width:          3400mm Height:         3000mm Weight:         12500kg

Stock # U2333-8 Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.

Tumbling riveting machine - radial spot riveting machine KUMAG Masch. No. 67/101 Year of construction 1967 Table size 330 x 280 mm Projection 215 mm Tool shank cone 8 - 10 mm Rivet shank diameter 1 - 10 mm Tool stroke 30 - 40 mm Operating air pressure 1 - 6 bar Rivet time adjustable 0.5 sec. - 3 h motor power 0.8 kW Mains connection 380 volts, 50 Hz - Conical tool shank for quick tool change - Rivet head on the column adjustable in height- Fine adjustment of the working stroke, max. 10 mm, with scale ring - Riveting force air pressure infinitely adjustable - Triggering via push-button table model Space requirement L x W x H 670 x 450 x 850 mm Weight 215 kg good condition; used

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Key data: 3600 , 440

2 KATO Alternator 60hz /900 RPM 3,800 kva / 13,800 volts new, never used . marine specifications

Kleemann feed hopper with vibrating chute Brand: Kleemann Dim. bunker : 5800 x 2900 x 900 mm Feed trough: length 4200 mm - width 1500/1300 mm Propulsion: 18.5 kW electric motor.

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings -Manufacturer: Komet -partly with internal water cooling -Weight: 12 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h -Price: per piece -Number: 3x available -Weight: 0.2 kg

Overview The tunnel pasteuriser Linaflex was manufactured in 2014 by Krones. Until now it was used in a can filling line in a beverage company in Germany. The owner sold the complete line, but as the buyer does not need this tunnel pasteuriser, it is for sale. The machine has been disassembled and can be inspected, last production in fall 2022, then cleanly dismantled. The machine has been regularly serviced by Krones technicians and is therefore in excellent condition. Tech Specs: Capacity 0,15l, 0,25l                              65.000 cans/ h 0,33l                                        50.000 cans/ h 0,5l                                          37.000 cans/ h

Overview The tray shrink packer was manufactured by the German company Kisters in 2002 and until recently was part of a PET filling line at a large Austrian beverage bottler. The tray shrink packer is now becoming available as the owner is investing in a completely new line. Technical data  40 cycles/ min  Tray + Film  Formation: 2x3  Bottle size: 1,5l  Siemens S7  Blocked with shrink oven  Two lane film wrapping  6 infeed lanes     Dimensions Kisters packer 7200 x 2000 x 2300 3000 x 2000 x 2300 Oven 2800 x 2000 x 2400 Traymagzin 2400 x 1100 x 1050 Inlet 4000 x 1300 x 700 + feet

Spritzdüse KREMLIN TETE N23 V Dimensions: 41 x 41 x 33 mm Minimum order value 50,- €

Terminal cover, 10 pieces KLÖCKNER-MOELLER HVDIL6M 4 015080 715856 for DILM7 to DILM32 unused ! Dimensions ( terminal cover ) : 120 x 100 x 45 mm Dimensions ( packaging ) : 330 x 140 x 160 mm

Command Enclosure, Empty Enclosure KLÖCKNER-MOELLER I4M Number of encoders: max. 4 Bore: Ø 22.5 mm Length: 187 mm Width: 70 mm Height: 67 mm Material: Plastic New, with documents ! Dimensions ( packaging ): 195 x 115 x 85 mm

Command Enclosure, Empty Enclosure KLÖCKNER-MOELLER I5M Number of encoders: max. 5 Bore: Ø 22.5 mm Length: 220 mm Width: 70 mm Height: 67 mm Material: Plastic New, with documents ! Dimensions ( packaging ): 225 x 115 x 85 mm

Surface-mounted housing, 2 pieces MOELLER, KLÖCKNER-MOELLER RMQ-Titan® 1x M22-I6 1x M22-I4 installation points: 6 / 4, installation diameter: Ø 22.5 mm cable entry: rear: 2 x M20, top: 2 x M20, side: 2 x M20 / M25 ( 1 x per side ), Material: plastic, with stainless steel screws New ! with documents ! Dimensions( single case ): 252 x 80 x 56 mm Dimensions( single package ): 225 / 190 x 85 x 115 mm Dimensions( packaging ): 225 x 170 x 120 mm

Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Typ 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Diaphragm valve KSB SISTO-16 TWA M13312 DVGW registered GG25 PN16 DN50 silicone-free New ! Dimensions: 230 x 170 x 280 mm

Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Operating pressure HD: max 25 bar Nominal voltage: 230 V 1AC 50 Hz Nominal current: 3,,65 A Ambient temperature: 5 - 43 °C - Water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil water separator ): 360 x 230 x 530 mm

Description: Suitable for manual grinding of cutting, milling and drilling tools such as end mills, shell end mills, Radius milling cutters, end milling cutters, thread taps, step drills, etc. on the circumference, end face and spiral. Accesories : optical length and angle measuring device with measuring microscope cylindrical grinding device 1 dressing device for radii 3 grinding wheel guards 3 cover discs 2 dividing discs 10 grinding wheel mounts, Workpiece diameter between the centers: 238 mm, grinding stroke max.: 110 mm, Grinding stroke max.: 190 mm, Vertical adjustment of grinding head: 325 mm, Cross adjustment tool slide: 100 mm, Grinding head carrier swivelling: 360 °, Vertical adjustment of the grinding head: 325 mm, Tool carrier swivelling: 360 °, Grinding spindle speeds infinitely variable from: 2,000 - 10,000 rpm,, Connected load: 2.0kW (400V/50Hz), Dimensions L x W x H: 11 ...

KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END  ...

Capacity (x): 25 Process Application: 25   Other Info: - Heavy Duty industrial trailer KAMPA - SLA Mini VRA MACH-ID 7685 Make:KAMPA Type:SLA Mini VRA Year:2013

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 530 mm turning speeds: 65 - 1810 U/min centre height: 205 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 2,2 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy productsetc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE

Magnetic drive pump without motor and motor connection, centrifugal pump, water pump chemical pump KSB ETAMAGNO TYAM-E 32-160 Q: 18 m3/h /br H: 30 m n: 2910 rpm hollow shaft diameter: Ø 28 mm induction: DN 50 Flange diameter: Ø 160 mm Output: DN 32 Flange diameter: Ø 140 mm Flange diameter (motor): Ø 275 / 300 mm used, tested ! without motor and motor connection ! Dimensions: 450 x 300 x 340 mm

-Exhibition machine-new exhibition machine

Machine: Koppens B.V. Tempura Dipper - Type: TD 600 - Voltage: 380 V, 3 Ph - Frequency: 50 Hz - Amperage: 1.64 A - Power: 0.45 kW - Band width: 600 mm - Dimensions (L x W x H): 3000 x 1150 x 1250 mm - All stainless steel - Adjustable speed

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Corner transfer pallet transport, overhauled 1400x1400 as well as other transport segments, turning segments, corner converters various manufacturers on request overhauled on request

Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2013 condition: good (used) Conveying length in mm: 3350 Nominal / outside width in mm: 720 Belt width in mm: 620 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including supports and side guides For indivi ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-510-450 RA1875 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 55 & 90 mm Angle between roller conveyors: 15° Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 420 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: nominal voltage: 24V, 380-500V condition: very good (used) angle: Winkel zweite Bahn 15° Conveying length in mm: 750 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 55, 90 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor s ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: ...

Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 675 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s: bis 1,25m/s scope of delivery: inklusive Pneumatische Ventile und Zylinder, including supports For i ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides Features: nominal voltage: 24V, 380-500V condition: very good (used) Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s ...

Safety valve, angle safety valves, pressure relief valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 920 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Safety valve, angle safety valves, pressure relief valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 1020 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

100 detachable towbars Kia Sportage, new, from model year 2015, without E-set for orders of 10 pieces: Price per piece 50,00 € plus VAT VAT

70 pieces of detachable towbars without E-set Kia Ceed from model year 2015 for orders of 10 pieces: Price per piece € 50.00 plus VAT

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

KHS tunnel pasteurizer, double-decker, glass bottles, capacity approx. 20,000 - 30,000 bottles / hour, usable area approx. 80 m², built in 1995, optionally with bottle transport KHS Tunnel Pasteuriser, 2 deck decks / levels, glass bottles, Capacity approx. 20.000 - 30.000 bph bottle per hour, Net space Treatment area approx. 80 m², Year 1995, Optional with bottle conveyors infeed and outfeed

Gebr. Tenon cutter Carpentry Abundmaschine KRÜSI ZA-66/95 YOC 1995 CE version with protective cabin Crosscut saws: Motor power: 4.0 kW 65° swivel Lateral adjustment by handwheel travel: 250 mm max. saw blade diameter: 750 mm max. cutting height: 290 mm Cutting saw – slitting unit: Motor power: 7.5 kW 45° swivel Saw blade diameter: 2 x 450 mm max. cutting depth: 175 mm Settling saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forward up to 45° Additional swivel heads: swivel by +/- 45° possible max. saw blade diameter: 350 mm max. cutting depth: 125 mm Sliding table: swivel +/- 60° on both sides Laser for cutting position indication for the swivel cross-cut saws Chassis Moving trestle Extraction connection: 2 x 120 mm and 2 x 80 mm Machine dimensions measured without sliding carriage: L: 470 cm W: 135  ...