We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,438 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Size 310 x 400 x 80 mm Size trimmed : max 300 x 388 x 80 mm - min 100 x 120 x 2 mm Speed : max 6.000 c/h Feeding height : max 80 mm
used
Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible.
used
Max. power: 1331kW, max. live steam pressure: 36bar, with Synchronous Generator AVK D DBN 130/125/Y4.
used
There is one KV-2,5/25 and one KV 1,6-2/25 available, power machine 1/ 2: 2907/ 1745kW, year of construction machine 1/ 2: 1988/ 1979, there is also a chimney available.
used
Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.
used
Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock. Special price free trucks loaded until the end of November 2023 on request.
used
• Table dimensions 460 mm x 800 mm • X-axis travel 500 mm • Spindle holder ISO 40 • Speed range (18) 50 - 2,500 rpm • Motor power main drive 3.75 / 4.4 kW
used
Stack height: max. 1.20 m Equipment: Standard, vibration and blow function
used
Used NFC Kreuzmeyr 2015 tube juice pasteurizer, PAS 2000- automatic. Capacity: 2000 l of juice/h. Movable complete device with self-priming juice pump, heat exchanger and automatic regulation, consisting of: Stainless steel bases Automatic temperature control Regulating valve No spreader, no heating boiler Requirements: Size of the heat supply pipe min. 42mm, heat circulation pump type Grundfos UPS 32/120 or comparable. Dimensions: width x length x height: 1000 x 1300 x 1700 mm Weight: 650 kg Power consumption: 1.1 kW 2 pcs available
used
used, tested, good condition listed price / per holder Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior holder for collets ER32 Outer diameter 60 mm Nut for ER collets Total length : 63 mm Delivery incl. 1 tightening bolt / tool. Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior hold ...
used
Description: Serial Number :KBTMGEDRTL8063372 ENGINE 4 cylinders , 3769 cm3 105 HP maximum speed 40 km/h 6 speed 4-wheel drive , Shovel model LG-1 year 2021 maximum load 1000 kg working pressure 190 bar Approved cab assembly BEYFE model K- M5LP with certificate attached Forks attachment (see photo) Hours according to counter 558 h Certificate of conformity available IMPORTANT: Registration costs will be paid by the buyer  , Approx. Onsite Dimension. (l x w x h): 7,000 x 2,100 x 2,400 mm, weight approx.: 3,055 kg
used
Description: Serial Number :KBTMGEDEDRAK8001807 ENGINE 4 cylinders , 3769 cm3 105 HP maximum speed 40 km/h 6 speed 4-wheel drive , Shovel model LG-1 year 2021 max. load 1000 kg, working pressure 190 bar Approved cab assembly BEYFE model K- M5LP with certificate attached Forks attachment (see photo) Hours according to counter 684 h Certificate of conformity available IMPORTANT: Registration costs will be paid by the buyer  , Approx. Onsite Dimension. (l x w x h): 7,000 x 2,100 x 2,400 mm, weight approx.: 3,055 kg
used
Description: Serial number : KBTMGEDRPL8063373 ENGINE 4 cylinders , 3769 cm3 105 HP maximum speed 40 km/h traction 4x4 6 speed , Shovel model LG-1 year 2021 maximum load 1000 kg working pressure 190 bar Approved cab assembly BEYFE model K- M5LP with certificate attached Attachment of forks and counterweights (see photo) Hours according to meter 598 h Certificate of conformity available IMPORTANT: Registration costs will be paid by the buyer Approx. Onsite Dimension. (l x w x h): 7,000 x 2,100 x 2,400 mm, weight approx.: 3,055 kg
used
Key data: 560 mm, 1200 mm, 380 mm
Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m
used
KRONES Variopac TFS Year of manufcturing: 2021 Nominal voltage: 400/230 Current System: AC 3/N/PE Frequency: 50 Hz Full load current: lb max 289 A Short-circuit srenght: lcc 55 kA Min. Short-circuit srenght: lk min 0,84 kA Pre-fuse: 400 A 0,25l Slim-Can 2x2er Shrink im 24er Tray with film stretch 3x2er Shrink im 24er Tray with film stretch 4x2er Shrink im 24er Tray with film stretch 0,33l Sleek-Can 3x2er Shrink im 24er Tray without film stretch 0,15l Slim-Can 2x2er Shrink im 24er Tray without film stretch 3x2er Shrink i ...
used
Key data: 650 mm, 3000 mm
Kern CD 650 DMT / Cycle Lathe Year of construction 2008, Control Siemens 840 D, Travel X/Z 450/3,000 mm, Tool carrier Multifix, Turning length 3,000 mm, Spindle bore 103 mm, Three-jaw lining, Tailstock Conveyor coolant system, Connected load 48 KW,
used
Fully functional Just dirty
2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.
used
Manufacturer Kramer & Grebe Year 2000 Located in Turkey Machine is in very good condition Moulding width : 555 mm bobbin width : 565 mm
used
Thermoforming and heat sealing machine for flexible and vacuum formats. Formats: 2x1 Productivity: 5 – 7 containers/min Length: 222mm Max Depths 80mm Bottom film: 322mm (+4/+2mm) Top film: 315mm (+1/-1mm) Productivity: 5 – 7 touches/min Voltage: 3 ph 400V /50Hz, N, P= 6 kw
used
Semi-automatic Year of manufacture/SO/GO: 1988/-/2003 Machine in good technical condition, after agreement possibility of testing. - Possibility of agreement - in case of agreement, in case of consultation, available for consultation - control system NS660, data input and output from PC via communication adapter TRANS - including chip conveyor - including many types of tool holders
used
Key data: 838 mm, 305 mm, 60 A
Inv. Num. : 7380 Type: E-36P Producer: KING SPARK Created: 1998 Parameters: Maximum operating current: 60 A Table dimensions: 838 x 305 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm
used
Key data: 25 mm, 230 mm, 130 mm
This range of bench and column drills is ideal for light drilling work in steel, cast iron and non-ferrous metals. They are used in workshops and industry for repair and one-off production. -Automatic feed - Coolant device - Quiet belt drive - low-maintenance and robust - Precision spindle bearings - durable and accurate - Table can be easily moved via hand crank and rack - Adjustable depth stop on the turnstile - Large quill stroke with precise guidance - Thick-walled column for stability with large workpieces -used
used
Lifting tipper Kemper HK 200 overhauled 2014 -Boiler lift tipper Kemper HK 200 -for spiral kneader boilers from Diosna from SP 120 to 240 -Dumping height 200cm -Total height 300cm
used
---------- Technical data ---------- Connectors: 300 mm, Sockets: 5 pieces, Socket diameter: 140 mm Sold as is, without technical inspection
used
---------- Technical data ---------- Connectors: 300 mm, Sockets: 5 pieces, Socket diameter: 160 mm Sold as is, without technical inspection
used
---------- Technical data ---------- Connector: 280 mm, Sockets: 4 pieces, Socket diameter: 3x120, 140 mm Sold as is, without technical inspection
used
---------- Technical data ---------- Connector: 350 mm, Sockets: 5 pieces, Socket diameter: 2x160.2x100.1x120 mm Sold as is, without technical inspection
used
Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC
used
Description: With accessories as shown in the pictures Diameter of the rolling element at the top: approx. 100 mm Diameter of the rolling element at the bottom: approx. 50 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,200 mm, weight approx.: 700 kg
used
Description: Fabrication number: 803088 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 80 A Table diameter: 1000 mm Grinding wheel diameter: 500 mm weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,200 mm
used
weight max.: 8 t foot operation: ja : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lifting tipper for boilers of agitators completely made of stainless steel 16A connector 200kg load capacity Tipping height lower edge boiler 1.60m Height approx. 270cm Pliers set up for REGO boiler type 100 mobile
used
Approx. Onsite Dimension. (l x w x h): 1,173 x 1,123 x 1,136 mm, weight approx.: 330 kg
used
Description: serial number: 20158 engine power: 11 kW capacity: 1.45 m3/min max. ,pressure: 10 bar  , transport dimensions: compressor: ,950 x 700 x 960 mm tank: ,1000 x 1000 x 2400 mm flow rate: 1,45 m3/min, suction capacity: 11 kW, operating pressure: 10, modelname / number: S15, year of manufacture: 1995/2018, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,700 x 2,400 mm, weight approx.: 1,000 kg
used
Description: amount 3 pieces weight approx.: 65 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016
used
25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...
used
Description: Further information Komet fine adjustment head M020 02360 KFK1, in a case Includes accessories as per pictures - Drill rod Komet B00 15610 'UJ 8' - Drill rod Komet B00 15650 'UJ 16' - Drill rod Komet B00 15690 'UJ 24' - Reduction Ø 8 - L01 10120 - Reduction Ø 10 - L01 10130 weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 250 x 100 mm
used
Approx. Onsite Dimension. (l x w x h): 14,000 x 6,000 x 5,000 mm, weight approx.: 1,000 kg
used
Key data: 600 mm, 200 mm
We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Double-sided planer copper mill DOIN- VUIN 605 year of construction 1975 S/N 3310 Manufacturer Kupfermühle woodworking machines Working width / maximum width 600 mm Working thickness: 200 mm chip removal max 20mm ( upper shaft ) chip removal 12mm ( under shaft ) Shortest piece length 350mm Technical equipment: from above: toothed draw shaft Toothed Pull Shaft 2 PCs 4-blade planner shaft, 605 mm, 15 kW from below: Table top, adjustable Traction shaft, smooth-running, adjustable 4-blade planner shaft, 600 mm, 11 kW 2 adjustable tables/pull roller in the lower table top Electric height adjustment Lift motor a ...
used
Article number: 27-06-007 Manufacturer: Kelch Very good general condition Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 600x400x600mm Weight: approx. 40kg Suitable for: storage of tool holders / SK 40 Other accessories on request Price and other technical data on request
incl. Auto Plate Loader (1 segment), automatic plate feeding from the pallet, maximum plate format 1296 x 2083 mm, maintenance contract, in good condition, with online processor on request available at short notice, Price on request
used
Description: Capacity: 1200 kg Platform size: 570x600 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 2,050 x 520 mm, weight approx.: 75 kg
new
Key data: 70 mm, 420 mm
The SSB Xn series drills are the right choice for any workshop, from maintenance to manufacturing. The Xn Advance series models feature a large touchscreen control display, which allows for excellent readability and safe intuitive operation. The spindle speed and quill feed are selected by the operator via robust manual gearboxes. The clamping table can be moved at height by motorized means and facilitates the handling of heavy clamping devices and workpieces. This drilling machine is ideal for one-off and small batch production, especially in the maintenance of large plants and in steel and hall construction. - High drilling performance - Touchscreen control panel - Finely stepped main spindle gearbox - Gear-shifted quill feed - Motorized table height adjustment - Swivel and rotatable work table If you are interested, we will be happy to send you our complete data sheet.
new
Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.
used
Kolbe mobile mixer-grinder, type: MWE 32, machine number: 125 941, 400 V, 50 Hz, 11.4+2.8 A, 5.5+1.1 kW, plate diameter: 98 mm, total dimensions: 770 mm x 1200 mm x 1320 mm.
used
Description: Wide finishing cutter of the Kennametal brand Diameter: Ø 200 mm Suitable for fine machining of cast iron and cast iron with nodular graphite. Features perfect axial run-out without adjustment of the insert. High-precision insert seat for outstanding surface quality and evenness. Easy handling and cost-effective set-up of the milling machine.  , Approx. Onsite Dimension. (l x w x h): 200 x 200 x 80 mm, weight approx.: 10 kg
used
Description: Composed of No. 5 tools from different manufacturing sectors. Demonstration case for NIKKEN KOSAKUSHO tools. Approx. Onsite Dimension. (l x w x h): 300 x 350 x 150 mm, weight approx.: 5 kg
used
We offer you 3 pieces of V2A steel tanks, tank height without stands 9.6 m, tank height with stands 10 m, diameter 2.5 m. Unfortunately, type plates are not available, further details are also missing. Most recently, before dismantling, water was stored in the tanks. More information is not known. You can inspect the tanks at our premises in Scheemda, the Netherlands.