jumbo 2 used for sale

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: Nolting, Type: NRK 220, Year: 2010, Control: Automatic, Heating power in kW: 234, Fuel type: Späne, Bulk firing: no, Flue gas fan: yes, Heating medium water: yes, Oil/gas additional unit: Ölbrenner, Underfeed stoker: yes, Bunker discharging: nur Schneckenförderer, Boiler system can be separated for transportation: yes, Year :2010

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 60 mm -Clamping depth: 240 mm -Dimensions: 545/200/H145 mm -Weight: 53.9 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Belt width: 250 mm -Conveyor length: 810 mm -Drive shaft: Ø 30 x 100 mm -Dimensions: 810/560/H225 mm -Weight: 63 kg

PLC control, digital output, PLC expansion module -Manufacturer: Siemens, Simatic ET 200eco PN Digital Output Module -Type: 6ES7 142-6BR00-0AB0 6ES7142-6BR00-0AB0 -Number: 7 modules available - Price: per piece -Dimensions: 175/60/H50 mm -Weight: 0.9 kg/pc

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Total conveyor belt width: 250 mm / 2 x 100 mm belt width -Conveyor length: 1330 mm -Drive shaft: Ø 30 x 100 mm -Transport dimensions: 1355/560/H225 mm -Weight: 87 kg

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Touch Panel Simatic IPC277DE 19 -Type: 6AV7882-0EB20-2EF0 IPC277DE -Voltage: 24V -Dimensions: 485/340/H80 mm -Weight: 5.8 kg

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

Manufacturer: Fischer Rückle, Type: FLA FDQ 2850 FCA, Year: 1993, Working width mm: 2850, Veneer thickness min mm: 0,4 , Veneer thickness max. min: 2, Feeding speed max m/min: 24, Year :1993

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.

grinding length: 2000 mm grinding width: 600 mm workpiece height: mm Control: total power requirement: 17 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kapp Model AST 203 Hob sharpening machine

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph

Key data: 1340 mm, 150 mm

SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW

Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun -Manufacturer: Nordson, Adhesive Melting Gun -Type: 2302 -Part No.: 276239 -Transport dimensions: 570/400/H530 mm -Total weight: 35 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 87 mm -Type: 32-8M-50 -Number of teeth: 32 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 1615-30 Ø 32 x 38 mm -Quantity: 1x timing belt pulley included -Dimensions: Ø 87 x 60 mm -Weight: 1.3 kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, control unit -Manufacturer: Robosoft, Control Rack -Type: 411-1206 -Fuse block: 412-2240 -Circuit board: 413-0800 -Individual components: see photos -Price/Sale: complete -Dimensions: 500/195/H145 mm -Weight: 3.6 kg

Industrial Ethernet Switch, Network Switch, Lan Switch -Manufacturer: Siemens, Simatic Net Industrial Ethernet Switch 16-port, unused, original packaging -Type: Scalance X216 6GK5216-0BA00-2AC2 -Accessories: incl. DVD Simatic Documentation -Cardboard dimensions: 200/200/H200 mm -Weight: 1.1 kg

Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Square, locksmithsquare, hair square, precision hair square -Angle stop: Leg length 510 x 250 mm -Dimensions: 510/250/H40 mm -Weight: 2.3 kg

Stop square, locksmith square, control square -Angle stop: Leg length 355 x 250 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 400/250/H25 mm -Weight: 2.7 kg/pc.

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

Machine name: Spiral conveyor Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year of Make: 2008 Speed: 28 rpm Trough width: 280 mm Conveyor length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: sewage sludge or similar sludge Drive motor: 3 kW Flow rate: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Curb weight: 800 kg Tech. Documentation: Yes Remark: Trough made of stainless steel and spiral made of normal steel, inclination angle 22°, flow rate sewage sludge 1.5 - 2.0 m3 /h Blobyberpmgfe Etu Ref Accessories: Swivel ring (swivel) Condition: Used Price: On request

with remoweble bowl

Doubleside glass grinding machine Min glass dimention 160x160mm Glass thickness 3-30 mm

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

PLC controller, connection module for digital electronic modules, terminal module, bus adapter -Manufacturer: Siemens, Bus adapter Simatic ET 200SP -Type: 6ES7193-6AR00-0AA0 6ES7 193-6AR00-0AA0 -Number: 4 modules available -Price: per piece -Dimensions: 70/60/H20 mm -Weight: 0.1 kg/pc.

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg R410A refrigerant. 1000 g 5 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.