jumbo 2 used for sale

used Telecam pal of karl Storz

; as is

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Tank / plant: Used lime milk Manufacturer: Passavant Material: Steel Size: located 1.77 m Height/length: 1.00 m Volume: 240 l

; operational

; operational

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now

Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now

see photos, 2 stubs

Gratpress

overhauled in 2006 after overhauling only 100 workinghours Available: sofort

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

R25187/17 PASQUINI & KROMER label machine model: Pakromat 250 S/2 age: 1999 about 1500 working hours available: immediately dimension: length: 3,5 m, height :2,10 m, depth ca. 1,7 m permanently maintained Available: sofort

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Key data: 840 , 900

FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Centrifugal pump Manufacturer: W. Schmidt K.G. Bretten. Type: Delta A 218/1 Usage area: wine pump Engine: Power: 1.5 HP Revolutions: 2840 RPM In very good condition!

FOR SALE... 2 SETS PROPOLSUION ENGINES CREPELLE 6R 26L CWR & 6R 26L CCWR TO WHOM IT MAY CONCERN; WE VE 2 SETS PROPOLSUION CREPELLE ENGINES AT OUR STOCK PLS FIND ENGINES DETAILS ON BELOW ENGINES CRANKSHAFT IS MARKED WITH STANDARD SIZE CLASS STAMP. TYPE 26L 6R CWR & 6R 26L CCWR POWER 1323kW ENGINE NO. C037 / C045 RPM 810 YOB 1990 WE CAN SELL ENGINE AS COMPLETE OR WE CAN DISMANTLE AND SELL WITH MAJOR PARTS ENGINES EX STOCK. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl

Saw Type ON 254

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

Flender engine, water cooled, with pump 3 ~ engine: ANWA-250ME-04 K No.: 3189850, IN the 2302, 1996 400 V VDE 96A 73.7 HP/55kW, cos. P. 0.87 50 Hz, 1475/min, th CI F, IP 54 DIN VDE 0530/91 DIN IEC 38/87, 0.530 t Cooling water consumption 15 l / min.

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

90 KW / 50 Hz.

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece