jumbo 2 used for sale

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : Jumey Heating surface approx. Taxi: 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water content full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Shaft: Ø 60 mm -Mounting: Square 24x24 mm / Shaft Ø 16 x 35 mm see photos -Dimensions: 365/96/86 mm -Weight: 6.5 kg

Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 50 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg

Chassis, electric motor, DC motor, traction motor, drive motor order picking forklift, drive wheel electric pallet truck -Manufacturer: Linde, chassis from electric forklift R20 -Type: R20 2503 -Wheel mount: bolt circle Ø 115 mm M14 -Individual components: see photos -Dimensions: 560/460/220 mm -Weight: 36 kg

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Keyboard, Control Panel Teachpendant -Manufacturer: B&R, control panel Operator Panel with signal column -Type: 4PPC70.0702-20B -Signal tower: Banner TL50HGWRQ -Transport dimensions: 1000/420/H180 mm -Weight: 13 kg

Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...

High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Weger Zuluftgerät, Type: ZL 2113, Year: 2013, Control: no, Kw output: 22, Heizmedium : Warmwasser, Temperatur vor-rücklauf: 70/90, Taschenfilter Typ: yes, Fresh air m³/h: 42000, Fresh air m³/h: 42000, Year :2013

Manufacturer: Wandress, Type: CH 29M/1650 BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Raimann, Type: KR 230, Year: 1993, Controlled feeding lineal: no, Cutting widht mm: 230, Working hight mm: 80, Diameter saw blade min-max mm: 350, revlutions saw spindle rpm: 6000, Diameter saw spindle mm: 65, Power engine kW: 30, Wight approx. kg: 2500, Year :1993

Manufacturer: Commander Frequenzumrichter, Type: SE 23400150 SE T 2,5, Serial number: 3781643037, FREE TEXT: kw 1,5, Free text 1: 0-1000 Hz, Free text 2: 6,4-4,2 Ampere,

Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: QCB NH1 250A -Fuse: 3x 160A -Number: 1x load-break switch available -Dimensions total: 250/180/H115 mm -Weight: 3.0 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

Manufacturer: Eltec Homag Karte, Type: Karte Seco 6 X RS 232, Model: Schnittstellenkarte, Serial number: 4-086-05-038,

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Sicar, Type: P5N/230, Year: 1989, Control: yes, Planing widht mm: 230, Planing hight mm: ca.130, Number of spindles: 5, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Feeding - kW: 1,5, 1.Bottom spindle kW: 5,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4.Top spindle kW: 7,5, 7th universal on left kW: 5,5, Year :1989

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working length mm: 2500, Working widht mm: 1400, Total hight mm: 900, Engine power kW: 0,75, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working widht mm: 1400, Working widht mm: 1400, Year :1999

Manufacturer: Bürkle UV Transportband, Type: ca.2005, Working length mm: 2630, Working widht mm: 1300, UV-Band: yes, Total hight mm: 890 +-, Bandsteuerung : yes, Engine power kW: ca.0,5, Feeding speed min-max m/min: 6-30, Feeding speed continous adjustable: über Umrichter möglich,

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Manufacturer: Howial, Type: MGZ 238, Year: 1980, Control: hand, Work piece width min-max mm: 30-120, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stack height in mm: ca.600 mm, Feeding speed max m/min: 40, Pushing device with catch: yes, Year :1980

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Aim ultrasonic generator -Type: 20HB260-2P-C3 -Number: 12x generator available -Price: per piece -Dimensions: 430/265/H140 mm -Weight: 12.2 kg/pc.

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 Ord.No.: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

Manufacturer: Wandres, Type: CH 29/1100/2750, Year: 2002, Dust removal brush: yes, Number of units: 2, kW Leistung Motoren: ca 2, Units mounted upright: yes, Working width mm: 2.750, Year :2002

Manufacturer: Ligmatech, Type: MTB 200/25/08, Year: 2011, Control: no, Working length mm: 2000, Working widht mm: 800, Total hight mm: ca.600, Belt width: 800, Total hight mm: ca.600, Engine power kW: 0,75, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Year :2011

Manufacturer: Limatech, Type: MTB 200/15/08 , Year: 2011, Control: no, Working length mm: 1500, Total hight mm: ca.650 mm, Total hight mm: ca.650 mm, Total power kW: 0,5, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Year :2011

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Hersteller : Siemens, Type: CPS 256, Control: PC 612, Serial number: B 1200-C963, Axis card: X7181, Plug-in card: C.N.I, Card number: 7187.20,

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: Telemecanique Schneider Steuerung, Type: TSX DMF 242A, Freitext 14: mit Spannungsversorgungsteil 24 Volt,

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,