jumbo 2 used for sale

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Mori Seiki NL 2000 SY 500 MOTORIZED LATHE :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX 850 Main spindle nose: ASA 6 Main spindle power: 15Kw Main spindle bar passage: 65mm Turning diameter: 275mm Turning length: 510mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 590mm Fast feeds linear axes X Y Z: X 30 / Y 10 / Z 30m/min Sub-spindle: yes Spindle nose: ASA 5 Number of counter-spindle speeds: 6000 Counter spindle power: 7.5Kw Bar Passage: 43mm Z stroke sub-spindle : 625mm Model and brand bar loader: Iemca Master 880 MP-E Chip conveyor: belt Presetting: yes Machine equipment: Extensive machi ...

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Famar Ergo 260 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Main spindle nose: ASA 6 Inverted lathe: yes X-axis spindle stroke: 820 (335)mm Z-axis spindle travel: 265mm Main spindle power: 31Kw Turning diameter: 250mm Turning length: 240mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 First turret tool attachment type: VDI 40 High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Other technical data: additional two-tool holder :::D DIMENSIONS AND WEIGHT::: Weight: 10000Kg

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Key data: 6 KW, 7 kVA, 400 V

Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...

Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

x-travel: 24000 mm y-travel: 3000 mm z-travel: 1250 mm spindle turning speed - stepless: 4000 U/min spindle taper ISO: 50 spindle motor: 37 kW feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 60 Stück control: HEIDENHAIN TNC 426 M total power requirement: - kW weight of the machine ca.: - t - CNC control HEIDENHAIN TNC 426 M - Automatic head 360° x 144 positions. - ISO 50 - Spindle extension L600 - ATC 60 positions - Spindle cooling (internal) 20 bar - Workpiece probe - Chip conveyor - Hydrostatic in x/y/z/a - Rigid tapping - preparation for horizontal Head There are no tables The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Product size max. L x330 x 160 mm, min. 75 x 40 x 5 mm

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 225/196/H160 mm -Weight: 7.7 kg

Key data: 1500 mm, 1 mm

Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Weight: approx. 1000 kg

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Modular Roll Mat Chain - new 1525 x 340

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 63 mm -Piston rod: Ø 20 mm -Total length: 260 mm -Total length extended: 300 mm -Dimensions: 75/75/H260 mm -Weight: 2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

new 12 pcs. 1525 x 600 rubberized 2 pcs. 700 x 600 rubberized 1 pc 1400 x 600 rubberized Price per m

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Total length: 775 mm -Total length extended: 1375 mm -Dimensions: 65/65/H775 mm -Weight: 6 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.

PAGO LABELLING MACHINE, MODEL SYSTEM 214/221 Year of construction: 2007 Multipurpose machine combining vignette labelling with tamper evidence labelling on both sides for pharmaceutical products. satisfies all special pharmaceutical requirements with a modular design for box handover and attachment of further components PRODUCTION DETAILS tamper evidence labels are dispensed at the side and deflected over the folding box edge vignettes are applied to the top of the folding box side belts and upper retaining belt guarantee safe guidance for labelling defective labelling is immediately recognized, and the product rejected central transport unit drive insures that the label position on the product can be defined and reproduced with precision codes, information or batch identifications can be printed or checked before the labelling process

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Key data: 250 mm, 604 mm

CNC Double Spindle Turning Center 8-Axis Goodway GTZ-2600Y Year of construction 2015 First commissioning at the end customer in 2018 Siemens 828D CNC Control 8-axis Turning diameter 250 mm Turning length 600 mm Main spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Sub-spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Counter spindle longitudinal travel B: 690 mm. Tool turret I 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Perpendicular travel Y: +/- 50 mm (for off-center machining) Tool Turret II 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X2 : 210 mm Longitudinal travel Z2: 620 mm.  ...

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 1000 x 520 mm no. of flutes: 6 groove width: 16 mm weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,20,80,8 m Turning, swivelling and tilting table ( universal table ) suitable for FP- 2 L / 3 L / 3 LV / 41 / 42 6 T-slots 16 mm at 90 mm centres. Table top can be swivelled +- 45° ( or 180° ). Table top can be tilted 4 x 15°. Table load moving/stiff: 1000/1500 kg, Weight approx. 400 kg Bearing frame and lifting beam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mm Shipping weight: ? kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm -Stroke: 100 mm -Pressure: max. 10 bar -Quantity: 1 available -Weight: 7.2 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm -Weight: 6.45 kg/piece

PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed -Power: 80 kW -Sine wave operation block current operation -Dimensions: 275/200/H480 mm -Weight: 23.1 kg

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg