jumbo 2 used for sale

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Alfa Laval Oil Seperator MAB 205

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping

AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

Kuka KR210-2 Series2000 Built in 2002 Payload 210kg Weight 1245kg Range 2700mm Connection line 7m Control KRC2 Built in 2002 Weight 185kg Software 4.1.5 SP08 ..

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Gearmotor Bauer D1A41AHZ/253 - used - MANUFACTURER´S DATA Bauer D1A41AHZ/253 motor speed: 1420/114U/min tension: 380/Y protection class: IP54 shaft: 30mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com

MWM TBG 234-V12, MWM TBD 234-V12 2 piece crankshaft, recon incl. gear and counterweights TN: 1216 3119 / 6.234.0.140.016.6 1st stage Price/piece: € 4,250.00 (ex works) Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

2x crankshaft, recon incl. gearwheel and counterweights PN: 1216 3119 / 6.234.0.140.016.6 2x 1st step Price/each: € 4.250,00 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.

Attachment: Chamber filter press-neuwertig demonstrator Hours of operation: No Design: page Holm led Filter plate format: 250 x 250 mm Number of plates: 8 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: 0.56 m m² Presses contents: approx. 7 dm3 PCB package length: 379,2 mm Filter pressure: 15 PSI Plate transport: manually Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 960 x 400 x 360 mm Weight: 350 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

TOX Power powerhouse in good condition Type K 4.200.20

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

Robot Kuka KR240 Series 2000 Built 2005 ed05 Range 2700mm Weight 1245kg Payload 240kg Control KRC2 ed05 Weight 185kg Software stand V5.2.9 Windows XP Engine hours 17300 Kuka KCP2 Interconnectors: 7m .

Power: 200 kVA / 160 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AvK / DKB 55/200-4/420703 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

approx. 25 m ³ / 25,000 litres steel tank / firefighting water tank / water container / water cistern / storage container / water tank: good condition content: 25 m³ / 25,000 litres Material: stainless steel tanks, above ground or underground tank Dimensions: approx. Ø 2.00 m x 8.00 m approximately Weight: approx. 6.0 t The tank is repainted from the outside with a bitumen paint, see picture above. The container is used, inside empty and properly cleaned. According to the age traces are present. The container can be used as storage tank for water, manure, AHL, ASL, seepage juice, rapeseed oil, rain collection tank, fire water tank, water tank, water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changi ...

Material: stainless steel Engine: 57 / 40 kW Weight: 7500 kg Length x Width x Height: 2900 mm x 1650 mm x 2000 mm Nominal volume : 2500 ltr. Working pressure : 5 bar electric input power : 380 volt / 50 hertz. Machine with withdrawable mixing device. You can also get the entire system with all components you need. Write us below!

Drive: 4 KW

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

Robot Kuka KR200-2 construction year 2000 reach 2400 mms weight 1125 kg load 200 kg control KRC1 with 7-th axis in the construction cupboard weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

Robot Kuka KR210 Series 2000 Built 2002/2004 Range 2700mm Weight 1245kg Payload 210kg Control VKRC2 (VW/Audi version) Weight 185kg Software stand V4.1.7 SP08 (Standard Kuka software, no VW) Kuka KCP2 Interconnectors 7m ..

Cartons for standing products

X-ray tube assembly type SRM 2250 red abzugen GS-500.

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

Robot Kuka KR210L180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2001 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...