jumbo 2 used for sale

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 365/280/H250 mm -Weight: 27 kg

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Modular Roll Mat Chain - new 1525 x 340

Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g

Replacement blades for cutting machines -Brand: Stumabo -Blade size: 190x50x5 mm -Type: 2114662 -Number: 162x available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/50/H5 mm -Weight: 0.27 kg

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

new 12 pcs. 1525 x 600 rubberized 2 pcs. 700 x 600 rubberized 1 pc 1400 x 600 rubberized Price per m

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...

Key data: 1500 mm, 1 mm

Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Weight: approx. 1000 kg

PAGO LABELLING MACHINE, MODEL SYSTEM 214/221 Year of construction: 2007 Multipurpose machine combining vignette labelling with tamper evidence labelling on both sides for pharmaceutical products. satisfies all special pharmaceutical requirements with a modular design for box handover and attachment of further components PRODUCTION DETAILS tamper evidence labels are dispensed at the side and deflected over the folding box edge vignettes are applied to the top of the folding box side belts and upper retaining belt guarantee safe guidance for labelling defective labelling is immediately recognized, and the product rejected central transport unit drive insures that the label position on the product can be defined and reproduced with precision codes, information or batch identifications can be printed or checked before the labelling process

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 604 mm

CNC Double Spindle Turning Center 8-Axis Goodway GTZ-2600Y Year of construction 2015 First commissioning at the end customer in 2018 Siemens 828D CNC Control 8-axis Turning diameter 250 mm Turning length 600 mm Main spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Sub-spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Counter spindle longitudinal travel B: 690 mm. Tool turret I 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Perpendicular travel Y: +/- 50 mm (for off-center machining) Tool Turret II 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X2 : 210 mm Longitudinal travel Z2: 620 mm.  ...

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 16 mm -Stroke: 260 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 457/43/H38 mm -Weight: 2.45 kg/piece

Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.

surface area: 1000 x 520 mm no. of flutes: 6 groove width: 16 mm weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,20,80,8 m Turning, swivelling and tilting table ( universal table ) suitable for FP- 2 L / 3 L / 3 LV / 41 / 42 6 T-slots 16 mm at 90 mm centres. Table top can be swivelled +- 45° ( or 180° ). Table top can be tilted 4 x 15°. Table load moving/stiff: 1000/1500 kg, Weight approx. 400 kg Bearing frame and lifting beam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 50 mm -piston rod: 16 mm (connection M16 x 1.5 thread) -Total length: 383 mm -Total length extended: 583 mm -Price: per piece -Number: 1x available -Weight: 1.35 kg

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Electric power: 42 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 186 Length: 176 Height: 172

Control: OSP-P200L max. turning diameter 550 mm max. turning length 600 mm Hollow spindle passage: 90 mm Spindle speed 3,200 rpm Main spindle: 30 kW A-turret: 12 seats (all driven) B-turret: 10 seats Tool holder: VDI 50 Accessories Schunk Chuck NC Rota 500 Chip conveyor Interlit Tailstock towable incl. external coolant system Door automation Touch Setter

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg

Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 350 Width: 230 Height: 260 Electric power: 12 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg

Dionex ICS 2000 Ion Chromatograph

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

Open Spray Stand 2x2,1x2,2 The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1. Dimensions of the powder stand width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3. Filter Φ 325x600 4 pcs Type Filter Cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type bag filter

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg

All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Width: 215 Length: 235 Height: 225

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 33 kW 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc oven is electrically operated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap guide

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 1 to 30 mm -Load capacity: 2,500 kg -Number: 1x terminal available -Price: per piece -Weight: 11 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 8 to 25 mm -Load capacity: 2,500 kg -Number: 4x terminals available -Price: per piece -Weight: 12 kg/piece